lib: Add stm32f0 hal and cmsis files

Signed-off-by: Eugene Krashtan <Eugene.Krashtan@opensynergy.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

1 files changed, 2379 insertions, 0 deletions

diff --git a/lib/hal-stm32f0/source/stm32f0xx_hal_irda.c b/lib/hal-stm32f0/source/stm32f0xx_hal_irda.c
new file mode 100644
index 00000000..606972ce
--- /dev/null
+++ b/lib/hal-stm32f0/source/stm32f0xx_hal_irda.c
@@ -0,0 +1,2379 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_irda.c
+  * @author  MCD Application Team
+  * @brief   IRDA HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the IrDA (Infrared Data Association) Peripheral
+  *          (IRDA)
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral State and Errors functions
+  *           + Peripheral Control functions
+  *
+  @verbatim
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+  [..]
+    The IRDA HAL driver can be used as follows:
+
+    (#) Declare a IRDA_HandleTypeDef handle structure (eg. IRDA_HandleTypeDef hirda).
+    (#) Initialize the IRDA low level resources by implementing the HAL_IRDA_MspInit() API
+        in setting the associated USART or UART in IRDA mode:
+        (++) Enable the USARTx/UARTx interface clock.
+        (++) USARTx/UARTx pins configuration:
+            (+++) Enable the clock for the USARTx/UARTx GPIOs.
+            (+++) Configure these USARTx/UARTx pins (TX as alternate function pull-up, RX as alternate function Input).
+        (++) NVIC configuration if you need to use interrupt process (HAL_IRDA_Transmit_IT()
+             and HAL_IRDA_Receive_IT() APIs): 
+            (+++) Configure the USARTx/UARTx interrupt priority.
+            (+++) Enable the NVIC USARTx/UARTx IRQ handle.            
+            (+++) The specific IRDA interrupts (Transmission complete interrupt,
+                  RXNE interrupt and Error Interrupts) will be managed using the macros
+                  __HAL_IRDA_ENABLE_IT() and __HAL_IRDA_DISABLE_IT() inside the transmit and receive process.
+                
+        (++) DMA Configuration if you need to use DMA process (HAL_IRDA_Transmit_DMA()
+             and HAL_IRDA_Receive_DMA() APIs):
+            (+++) Declare a DMA handle structure for the Tx/Rx channel.
+            (+++) Enable the DMAx interface clock.
+            (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.
+            (+++) Configure the DMA Tx/Rx channel.
+            (+++) Associate the initialized DMA handle to the IRDA DMA Tx/Rx handle.
+            (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx channel.
+
+    (#) Program the Baud Rate, Word Length and Parity and Mode(Receiver/Transmitter),
+        the normal or low power mode and the clock prescaler in the hirda handle Init structure.
+
+    (#) Initialize the IRDA registers by calling the HAL_IRDA_Init() API:
+        (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc)
+             by calling the customized HAL_IRDA_MspInit() API.
+        
+         -@@- The specific IRDA interrupts (Transmission complete interrupt,
+             RXNE interrupt and Error Interrupts) will be managed using the macros
+             __HAL_IRDA_ENABLE_IT() and __HAL_IRDA_DISABLE_IT() inside the transmit and receive process.
+
+    (#) Three operation modes are available within this driver :
+
+     *** Polling mode IO operation ***
+     =================================
+     [..]
+       (+) Send an amount of data in blocking mode using HAL_IRDA_Transmit()
+       (+) Receive an amount of data in blocking mode using HAL_IRDA_Receive()
+
+     *** Interrupt mode IO operation ***
+     ===================================
+     [..]
+       (+) Send an amount of data in non-blocking mode using HAL_IRDA_Transmit_IT()
+       (+) At transmission end of transfer HAL_IRDA_TxCpltCallback() is executed and user can
+            add his own code by customization of function pointer HAL_IRDA_TxCpltCallback()
+       (+) Receive an amount of data in non-blocking mode using HAL_IRDA_Receive_IT()
+       (+) At reception end of transfer HAL_IRDA_RxCpltCallback() is executed and user can
+            add his own code by customization of function pointer HAL_IRDA_RxCpltCallback()
+       (+) In case of transfer Error, HAL_IRDA_ErrorCallback() function is executed and user can
+            add his own code by customization of function pointer HAL_IRDA_ErrorCallback()
+
+     *** DMA mode IO operation ***
+     ==============================
+     [..]
+       (+) Send an amount of data in non-blocking mode (DMA) using HAL_IRDA_Transmit_DMA()
+       (+) At transmission half of transfer HAL_IRDA_TxHalfCpltCallback() is executed and user can
+            add his own code by customization of function pointer HAL_IRDA_TxHalfCpltCallback()
+       (+) At transmission end of transfer HAL_IRDA_TxCpltCallback() is executed and user can
+            add his own code by customization of function pointer HAL_IRDA_TxCpltCallback()
+       (+) Receive an amount of data in non-blocking mode (DMA) using HAL_IRDA_Receive_DMA()
+       (+) At reception half of transfer HAL_IRDA_RxHalfCpltCallback() is executed and user can
+            add his own code by customization of function pointer HAL_IRDA_RxHalfCpltCallback()
+       (+) At reception end of transfer HAL_IRDA_RxCpltCallback() is executed and user can
+            add his own code by customization of function pointer HAL_IRDA_RxCpltCallback()
+       (+) In case of transfer Error, HAL_IRDA_ErrorCallback() function is executed and user can
+            add his own code by customization of function pointer HAL_IRDA_ErrorCallback()
+
+     *** IRDA HAL driver macros list ***
+     ====================================
+     [..]
+       Below the list of most used macros in IRDA HAL driver.
+
+       (+) __HAL_IRDA_ENABLE: Enable the IRDA peripheral
+       (+) __HAL_IRDA_DISABLE: Disable the IRDA peripheral
+       (+) __HAL_IRDA_GET_FLAG : Check whether the specified IRDA flag is set or not
+       (+) __HAL_IRDA_CLEAR_FLAG : Clear the specified IRDA pending flag
+       (+) __HAL_IRDA_ENABLE_IT: Enable the specified IRDA interrupt
+       (+) __HAL_IRDA_DISABLE_IT: Disable the specified IRDA interrupt
+       (+) __HAL_IRDA_GET_IT_SOURCE: Check whether or not the specified IRDA interrupt is enabled
+
+     [..]
+       (@) You can refer to the IRDA HAL driver header file for more useful macros
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup IRDA IRDA
+  * @brief HAL IRDA module driver
+  * @{
+  */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup IRDA_Private_Constants IRDA Private Constants
+  * @{
+  */
+#define IRDA_TEACK_REACK_TIMEOUT            1000U                                  /*!< IRDA TX or RX enable acknowledge time-out value  */
+#define IRDA_CR1_FIELDS  ((uint32_t)(USART_CR1_M | USART_CR1_PCE \
+                                   | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE))  /*!< UART or USART CR1 fields of parameters set by IRDA_SetConfig API */
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup IRDA_Private_Functions
+  * @{
+  */
+static HAL_StatusTypeDef IRDA_SetConfig(IRDA_HandleTypeDef *hirda);
+static HAL_StatusTypeDef IRDA_CheckIdleState(IRDA_HandleTypeDef *hirda);
+static HAL_StatusTypeDef IRDA_WaitOnFlagUntilTimeout(IRDA_HandleTypeDef *hirda, uint32_t Flag, FlagStatus Status, uint32_t Tickstart, uint32_t Timeout);
+static void IRDA_EndTxTransfer(IRDA_HandleTypeDef *hirda);
+static void IRDA_EndRxTransfer(IRDA_HandleTypeDef *hirda);
+static void IRDA_DMATransmitCplt(DMA_HandleTypeDef *hdma);
+static void IRDA_DMATransmitHalfCplt(DMA_HandleTypeDef *hdma);
+static void IRDA_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
+static void IRDA_DMAReceiveHalfCplt(DMA_HandleTypeDef *hdma);
+static void IRDA_DMAError(DMA_HandleTypeDef *hdma);
+static void IRDA_DMAAbortOnError(DMA_HandleTypeDef *hdma);
+static void IRDA_DMATxAbortCallback(DMA_HandleTypeDef *hdma);
+static void IRDA_DMARxAbortCallback(DMA_HandleTypeDef *hdma);
+static void IRDA_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma);
+static void IRDA_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma);
+static HAL_StatusTypeDef IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda);
+static HAL_StatusTypeDef IRDA_EndTransmit_IT(IRDA_HandleTypeDef *hirda);
+static HAL_StatusTypeDef IRDA_Receive_IT(IRDA_HandleTypeDef *hirda);
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup IRDA_Exported_Functions IRDA Exported Functions
+  * @{
+  */
+
+/** @defgroup IRDA_Exported_Functions_Group1 Initialization and de-initialization functions
+  *  @brief    Initialization and Configuration functions
+  *
+@verbatim
+  ==============================================================================
+              ##### Initialization and Configuration functions #####
+  ==============================================================================
+  [..]
+  This subsection provides a set of functions allowing to initialize the USARTx
+  in asynchronous IRDA mode.
+  (+) For the asynchronous mode only these parameters can be configured:
+      (++) Baud Rate
+      (++) Word Length
+      (++) Parity
+      (++) Power mode
+      (++) Prescaler setting
+      (++) Receiver/transmitter modes
+
+  [..]
+  The HAL_IRDA_Init() API follows the USART asynchronous configuration procedures
+  (details for the procedures are available in reference manual).
+
+@endverbatim
+  * @{
+  */
+
+/*
+  Additional Table:  If the parity is enabled, then the MSB bit of the data written
+                     in the data register is transmitted but is changed by the parity bit.
+                     According to device capability (support or not of 7-bit word length),
+                     frame length is either defined by the M bit (8-bits or 9-bits)
+                     or by the M1 and M0 bits (7-bit, 8-bit or 9-bit).
+                     Possible IRDA frame formats are as listed in the following table:
+
+    Table 1. IRDA frame format.             
+    +-----------------------------------------------------------------------+
+    |       M bit       |  PCE bit  |             IRDA frame                |
+    |-------------------|-----------|---------------------------------------|
+    |         0         |     0     |    | SB |    8-bit data   | STB |     |
+    |-------------------|-----------|---------------------------------------|
+    |         0         |     1     |    | SB | 7-bit data | PB | STB |     |
+    |-------------------|-----------|---------------------------------------|
+    |         1         |     0     |    | SB |    9-bit data   | STB |     |
+    |-------------------|-----------|---------------------------------------|
+    |         1         |     1     |    | SB | 8-bit data | PB | STB |     |
+    +-----------------------------------------------------------------------+
+    |  M1 bit |  M0 bit |  PCE bit  |             IRDA frame                |
+    |---------|---------|-----------|---------------------------------------|
+    |    0    |    0    |     0     |    | SB |    8 bit data   | STB |     |
+    |---------|---------|-----------|---------------------------------------|
+    |    0    |    0    |     1     |    | SB | 7 bit data | PB | STB |     |
+    |---------|---------|-----------|---------------------------------------|
+    |    0    |    1    |     0     |    | SB |    9 bit data   | STB |     |
+    |---------|---------|-----------|---------------------------------------|
+    |    0    |    1    |     1     |    | SB | 8 bit data | PB | STB |     |
+    |---------|---------|-----------|---------------------------------------|
+    |    1    |    0    |     0     |    | SB |    7 bit data   | STB |     |
+    |---------|---------|-----------|---------------------------------------|
+    |    1    |    0    |     1     |    | SB | 6 bit data | PB | STB |     |
+    +-----------------------------------------------------------------------+
+
+*/
+
+/**
+  * @brief Initialize the IRDA mode according to the specified
+  *        parameters in the IRDA_InitTypeDef and initialize the associated handle.
+  * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified IRDA module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda)
+{
+  /* Check the IRDA handle allocation */
+  if(hirda == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the USART/UART associated to the IRDA handle */
+  assert_param(IS_IRDA_INSTANCE(hirda->Instance));
+
+  if(hirda->gState == HAL_IRDA_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hirda->Lock = HAL_UNLOCKED;
+
+    /* Init the low level hardware : GPIO, CLOCK */
+    HAL_IRDA_MspInit(hirda);
+  }
+
+  hirda->gState = HAL_IRDA_STATE_BUSY;
+
+  /* Disable the Peripheral to update the configuration registers */
+  __HAL_IRDA_DISABLE(hirda);
+
+  /* Set the IRDA Communication parameters */
+  if (IRDA_SetConfig(hirda) == HAL_ERROR)
+  {
+    return HAL_ERROR;
+  }
+
+  /* In IRDA mode, the following bits must be kept cleared:
+  - LINEN, STOP and CLKEN bits in the USART_CR2 register,
+  - SCEN and HDSEL bits in the USART_CR3 register.*/
+  CLEAR_BIT(hirda->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN | USART_CR2_STOP));
+  CLEAR_BIT(hirda->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL));
+
+  /* set the UART/USART in IRDA mode */
+  hirda->Instance->CR3 |= USART_CR3_IREN;
+
+  /* Enable the Peripheral */
+  __HAL_IRDA_ENABLE(hirda);
+
+  /* TEACK and/or REACK to check before moving hirda->gState and hirda->RxState to Ready */
+  return (IRDA_CheckIdleState(hirda));
+}
+
+/**
+  * @brief DeInitialize the IRDA peripheral.
+  * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified IRDA module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda)
+{
+  /* Check the IRDA handle allocation */
+  if(hirda == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the USART/UART associated to the IRDA handle */
+  assert_param(IS_IRDA_INSTANCE(hirda->Instance));
+
+  hirda->gState = HAL_IRDA_STATE_BUSY;
+
+  /* DeInit the low level hardware */
+  HAL_IRDA_MspDeInit(hirda);
+  /* Disable the Peripheral */
+  __HAL_IRDA_DISABLE(hirda);
+
+  hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+  hirda->gState    = HAL_IRDA_STATE_RESET;
+  hirda->RxState   = HAL_IRDA_STATE_RESET;
+
+  /* Process Unlock */
+  __HAL_UNLOCK(hirda);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Initialize the IRDA MSP.
+  * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified IRDA module.
+  * @retval None
+  */
+__weak void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hirda);
+
+  /* NOTE: This function should not be modified, when the callback is needed,
+           the HAL_IRDA_MspInit can be implemented in the user file
+   */
+}
+
+/**
+  * @brief DeInitialize the IRDA MSP.
+  * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified IRDA module.
+  * @retval None
+  */
+__weak void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hirda);
+
+  /* NOTE: This function should not be modified, when the callback is needed,
+           the HAL_IRDA_MspDeInit can be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_Exported_Functions_Group2 IO operation functions
+  *  @brief   IRDA Transmit and Receive functions
+  *
+@verbatim
+ ===============================================================================
+                      ##### IO operation functions #####
+ ===============================================================================
+  [..]
+    This subsection provides a set of functions allowing to manage the IRDA data transfers.
+
+  [..]
+    IrDA is a half duplex communication protocol. If the Transmitter is busy, any data
+    on the IrDA receive line will be ignored by the IrDA decoder and if the Receiver
+    is busy, data on the TX from the USART to IrDA will not be encoded by IrDA.
+    While receiving data, transmission should be avoided as the data to be transmitted
+    could be corrupted.
+
+    (#) There are two mode of transfer:
+        (++) Blocking mode: the communication is performed in polling mode.
+             The HAL status of all data processing is returned by the same function
+             after finishing transfer.
+        (++) Non-Blocking mode: the communication is performed using Interrupts
+             or DMA, these API's return the HAL status.
+             The end of the data processing will be indicated through the
+             dedicated IRDA IRQ when using Interrupt mode or the DMA IRQ when
+             using DMA mode.
+             The HAL_IRDA_TxCpltCallback(), HAL_IRDA_RxCpltCallback() user callbacks
+             will be executed respectively at the end of the Transmit or Receive process
+             The HAL_IRDA_ErrorCallback() user callback will be executed when a communication error is detected
+
+    (#) Blocking mode APIs are :
+        (++) HAL_IRDA_Transmit()
+        (++) HAL_IRDA_Receive()
+
+    (#) Non Blocking mode APIs with Interrupt are :
+        (++) HAL_IRDA_Transmit_IT()
+        (++) HAL_IRDA_Receive_IT()
+        (++) HAL_IRDA_IRQHandler()
+
+    (#) Non Blocking mode functions with DMA are :
+        (++) HAL_IRDA_Transmit_DMA()
+        (++) HAL_IRDA_Receive_DMA()
+        (++) HAL_IRDA_DMAPause()
+        (++) HAL_IRDA_DMAResume()
+        (++) HAL_IRDA_DMAStop()
+
+    (#) A set of Transfer Complete Callbacks are provided in Non Blocking mode:
+        (++) HAL_IRDA_TxHalfCpltCallback()
+        (++) HAL_IRDA_TxCpltCallback()
+        (++) HAL_IRDA_RxHalfCpltCallback()
+        (++) HAL_IRDA_RxCpltCallback()
+        (++) HAL_IRDA_ErrorCallback()
+
+    (#) Non-Blocking mode transfers could be aborted using Abort API's :
+        (++) HAL_IRDA_Abort()
+        (++) HAL_IRDA_AbortTransmit()
+        (++) HAL_IRDA_AbortReceive()
+        (++) HAL_IRDA_Abort_IT()
+        (++) HAL_IRDA_AbortTransmit_IT()
+        (++) HAL_IRDA_AbortReceive_IT()
+
+    (#) For Abort services based on interrupts (HAL_IRDA_Abortxxx_IT), a set of Abort Complete Callbacks are provided:
+        (++) HAL_IRDA_AbortCpltCallback()
+        (++) HAL_IRDA_AbortTransmitCpltCallback()
+        (++) HAL_IRDA_AbortReceiveCpltCallback()
+
+    (#) In Non-Blocking mode transfers, possible errors are split into 2 categories.
+        Errors are handled as follows :
+       (++) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is 
+            to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error in Interrupt mode reception .
+            Received character is then retrieved and stored in Rx buffer, Error code is set to allow user to identify error type,
+            and HAL_IRDA_ErrorCallback() user callback is executed. Transfer is kept ongoing on IRDA side.
+            If user wants to abort it, Abort services should be called by user.
+       (++) Error is considered as Blocking : Transfer could not be completed properly and is aborted.
+            This concerns Overrun Error In Interrupt mode reception and all errors in DMA mode.
+            Error code is set to allow user to identify error type, and HAL_IRDA_ErrorCallback() user callback is executed.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Send an amount of data in blocking mode.
+  * @param  hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified IRDA module.
+  * @param  pData Pointer to data buffer.
+  * @param  Size Amount of data to be sent.
+  * @param  Timeout Specify timeout value.
+  * @note   When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
+  *         address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits)
+  *         (as sent data will be handled using u16 pointer cast). Depending on compilation chain,
+  *         use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  uint16_t* tmp;
+  uint32_t tickstart = 0U;
+
+  /* Check that a Tx process is not already ongoing */
+  if(hirda->gState == HAL_IRDA_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0U))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* In case of 9bits/No Parity transfer, pData buffer provided as input paramter 
+       should be aligned on a u16 frontier, as data to be filled into TDR will be 
+       handled through a u16 cast. */
+    if ((hirda->Init.WordLength == UART_WORDLENGTH_9B) && (hirda->Init.Parity == UART_PARITY_NONE))
+    {
+      if((((uint32_t)pData)&1U) != 0U)
+      {
+        return  HAL_ERROR;
+      }
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hirda);
+
+    hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+    hirda->gState = HAL_IRDA_STATE_BUSY_TX;
+
+    /* Init tickstart for timeout managment*/
+    tickstart = HAL_GetTick();
+
+    hirda->TxXferSize = Size;
+    hirda->TxXferCount = Size;
+    while(hirda->TxXferCount > 0U)
+    {
+      hirda->TxXferCount--;
+
+      if(IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+      if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE))
+      {
+        tmp = (uint16_t*) pData;
+        hirda->Instance->TDR = (*tmp & (uint16_t)0x01FFU);
+        pData += 2;
+      }
+      else
+      {
+        hirda->Instance->TDR = (*pData++ & (uint8_t)0xFFU);
+      }
+    }
+
+    if(IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+
+    /* At end of Tx process, restore hirda->gState to Ready */
+    hirda->gState = HAL_IRDA_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hirda);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receive an amount of data in blocking mode.
+  * @param  hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified IRDA module.
+  * @param  pData Pointer to data buffer.
+  * @param  Size Amount of data to be received.
+  * @param  Timeout Specify timeout value.
+  * @note   When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
+  *         address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits)
+  *         (as received data will be handled using u16 pointer cast). Depending on compilation chain,
+  *         use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  uint16_t* tmp;
+  uint16_t uhMask;
+  uint32_t tickstart = 0;
+
+  /* Check that a Rx process is not already ongoing */
+  if(hirda->RxState == HAL_IRDA_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0U))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* In case of 9bits/No Parity transfer, pData buffer provided as input paramter 
+       should be aligned on a u16 frontier, as data to be received from RDR will be 
+       handled through a u16 cast. */
+    if ((hirda->Init.WordLength == UART_WORDLENGTH_9B) && (hirda->Init.Parity == UART_PARITY_NONE))
+    {
+      if((((uint32_t)pData)&1U) != 0U)
+      {
+        return  HAL_ERROR;
+      }
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hirda);
+
+    hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+    hirda->RxState = HAL_IRDA_STATE_BUSY_RX;
+
+    /* Init tickstart for timeout managment*/
+    tickstart = HAL_GetTick();
+
+    hirda->RxXferSize = Size;
+    hirda->RxXferCount = Size;
+
+    /* Computation of the mask to apply to RDR register
+       of the UART associated to the IRDA */
+    IRDA_MASK_COMPUTATION(hirda);
+    uhMask = hirda->Mask;
+
+    /* Check data remaining to be received */
+    while(hirda->RxXferCount > 0U)
+    {
+      hirda->RxXferCount--;
+
+      if(IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+      if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE))
+      {
+        tmp = (uint16_t*) pData ;
+        *tmp = (uint16_t)(hirda->Instance->RDR & uhMask);
+        pData +=2;
+      }
+      else
+      {
+        *pData++ = (uint8_t)(hirda->Instance->RDR & (uint8_t)uhMask);
+      }
+    }
+
+    /* At end of Rx process, restore hirda->RxState to Ready */
+    hirda->RxState = HAL_IRDA_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hirda);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Send an amount of data in interrupt mode.
+  * @param  hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified IRDA module.
+  * @param  pData Pointer to data buffer.
+  * @param  Size Amount of data to be sent.
+  * @note   When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
+  *         address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits)
+  *         (as sent data will be handled using u16 pointer cast). Depending on compilation chain,
+  *         use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size)
+{
+  /* Check that a Tx process is not already ongoing */
+  if(hirda->gState == HAL_IRDA_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0U))
+    {
+      return HAL_ERROR;
+    }
+
+    /* In case of 9bits/No Parity transfer, pData buffer provided as input paramter 
+       should be aligned on a u16 frontier, as data to be filled into TDR will be 
+       handled through a u16 cast. */
+    if ((hirda->Init.WordLength == UART_WORDLENGTH_9B) && (hirda->Init.Parity == UART_PARITY_NONE))
+    {
+      if((((uint32_t)pData)&1U) != 0U)
+      {
+        return  HAL_ERROR;
+      }
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hirda);
+
+    hirda->pTxBuffPtr = pData;
+    hirda->TxXferSize = Size;
+    hirda->TxXferCount = Size;
+
+    hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+    hirda->gState = HAL_IRDA_STATE_BUSY_TX;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hirda);
+
+    /* Enable the IRDA Transmit Data Register Empty Interrupt */
+    SET_BIT(hirda->Instance->CR1, USART_CR1_TXEIE);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receive an amount of data in interrupt mode.
+  * @param  hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified IRDA module.
+  * @param  pData Pointer to data buffer.
+  * @param  Size Amount of data to be received.
+  * @note   When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
+  *         address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits)
+  *         (as received data will be handled using u16 pointer cast). Depending on compilation chain,
+  *         use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size)
+{
+  /* Check that a Rx process is not already ongoing */
+  if(hirda->RxState == HAL_IRDA_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0U))
+    {
+      return HAL_ERROR;
+    }
+
+    /* In case of 9bits/No Parity transfer, pData buffer provided as input paramter 
+       should be aligned on a u16 frontier, as data to be received from RDR will be 
+       handled through a u16 cast. */
+    if ((hirda->Init.WordLength == UART_WORDLENGTH_9B) && (hirda->Init.Parity == UART_PARITY_NONE))
+    {
+      if((((uint32_t)pData)&1U) != 0U)
+      {
+        return  HAL_ERROR;
+      }
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hirda);
+
+    hirda->pRxBuffPtr = pData;
+    hirda->RxXferSize = Size;
+    hirda->RxXferCount = Size;
+
+    /* Computation of the mask to apply to the RDR register
+       of the UART associated to the IRDA */
+    IRDA_MASK_COMPUTATION(hirda);
+
+    hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+    hirda->RxState = HAL_IRDA_STATE_BUSY_RX;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hirda);
+
+    /* Enable the IRDA Parity Error and Data Register not empty Interrupts */
+    SET_BIT(hirda->Instance->CR1, USART_CR1_PEIE| USART_CR1_RXNEIE);
+
+    /* Enable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */
+    SET_BIT(hirda->Instance->CR3, USART_CR3_EIE);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Send an amount of data in DMA mode.
+  * @param  hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified IRDA module.
+  * @param  pData pointer to data buffer.
+  * @param  Size amount of data to be sent.
+  * @note   When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
+  *         address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits)
+  *         (as sent data will be handled by DMA from halfword frontier). Depending on compilation chain,
+  *         use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size)
+{
+  /* Check that a Tx process is not already ongoing */
+  if(hirda->gState == HAL_IRDA_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0U))
+    {
+      return HAL_ERROR;
+    }
+
+    /* In case of 9bits/No Parity transfer, pData buffer provided as input paramter 
+       should be aligned on a u16 frontier, as data copy into TDR will be 
+       handled by DMA from a u16 frontier. */
+    if ((hirda->Init.WordLength == UART_WORDLENGTH_9B) && (hirda->Init.Parity == UART_PARITY_NONE))
+    {
+      if((((uint32_t)pData)&1U) != 0U)
+      {
+        return  HAL_ERROR;
+      }
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hirda);
+
+    hirda->pTxBuffPtr = pData;
+    hirda->TxXferSize = Size;
+    hirda->TxXferCount = Size;
+
+    hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+    hirda->gState = HAL_IRDA_STATE_BUSY_TX;
+
+    /* Set the IRDA DMA transfer complete callback */
+    hirda->hdmatx->XferCpltCallback = IRDA_DMATransmitCplt;
+
+    /* Set the IRDA DMA half transfer complete callback */
+    hirda->hdmatx->XferHalfCpltCallback = IRDA_DMATransmitHalfCplt;
+
+    /* Set the DMA error callback */
+    hirda->hdmatx->XferErrorCallback = IRDA_DMAError;
+
+    /* Set the DMA abort callback */
+    hirda->hdmatx->XferAbortCallback = NULL;
+
+    /* Enable the IRDA transmit DMA channel */
+    HAL_DMA_Start_IT(hirda->hdmatx, (uint32_t)hirda->pTxBuffPtr, (uint32_t)&hirda->Instance->TDR, Size);
+
+    /* Clear the TC flag in the ICR register */
+    __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_TCF);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hirda);
+
+    /* Enable the DMA transfer for transmit request by setting the DMAT bit
+       in the USART CR3 register */
+    SET_BIT(hirda->Instance->CR3, USART_CR3_DMAT);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receive an amount of data in DMA mode.
+  * @param  hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified IRDA module.
+  * @param  pData Pointer to data buffer.
+  * @param  Size Amount of data to be received.
+  * @note   When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
+  *         address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits)
+  *         (as received data will be handled by DMA from halfword frontier). Depending on compilation chain,
+  *         use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size)
+{
+  /* Check that a Rx process is not already ongoing */
+  if(hirda->RxState == HAL_IRDA_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0U))
+    {
+      return HAL_ERROR;
+    }
+
+    /* In case of 9bits/No Parity transfer, pData buffer provided as input paramter 
+       should be aligned on a u16 frontier, as data copy from RDR will be 
+       handled by DMA from a u16 frontier. */
+    if ((hirda->Init.WordLength == UART_WORDLENGTH_9B) && (hirda->Init.Parity == UART_PARITY_NONE))
+    {
+      if((((uint32_t)pData)&1U) != 0U)
+      {
+        return  HAL_ERROR;
+      }
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hirda);
+
+    hirda->pRxBuffPtr = pData;
+    hirda->RxXferSize = Size;
+
+    hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+    hirda->RxState = HAL_IRDA_STATE_BUSY_RX;
+
+    /* Set the IRDA DMA transfer complete callback */
+    hirda->hdmarx->XferCpltCallback = IRDA_DMAReceiveCplt;
+
+    /* Set the IRDA DMA half transfer complete callback */
+    hirda->hdmarx->XferHalfCpltCallback = IRDA_DMAReceiveHalfCplt;
+
+    /* Set the DMA error callback */
+    hirda->hdmarx->XferErrorCallback = IRDA_DMAError;
+
+    /* Set the DMA abort callback */
+    hirda->hdmarx->XferAbortCallback = NULL;
+
+    /* Enable the DMA channel */
+    HAL_DMA_Start_IT(hirda->hdmarx, (uint32_t)&hirda->Instance->RDR, (uint32_t)hirda->pRxBuffPtr, Size);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hirda);
+
+    /* Enable the UART Parity Error Interrupt */
+    SET_BIT(hirda->Instance->CR1, USART_CR1_PEIE);
+
+    /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */
+    SET_BIT(hirda->Instance->CR3, USART_CR3_EIE);
+
+    /* Enable the DMA transfer for the receiver request by setting the DMAR bit
+       in the USART CR3 register */
+    SET_BIT(hirda->Instance->CR3, USART_CR3_DMAR);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+
+/**
+  * @brief  Pause the DMA Transfer.
+  * @param  hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified IRDA module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda)
+{
+  /* Process Locked */
+  __HAL_LOCK(hirda);
+
+  if ((hirda->gState == HAL_IRDA_STATE_BUSY_TX) &&
+      (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)))
+  {
+    /* Disable the IRDA DMA Tx request */
+    CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT);
+  }
+  if ((hirda->RxState == HAL_IRDA_STATE_BUSY_RX) &&
+      (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)))
+  {
+    /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */
+    CLEAR_BIT(hirda->Instance->CR1, USART_CR1_PEIE);
+    CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE);
+
+    /* Disable the IRDA DMA Rx request */
+    CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR);
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hirda);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Resume the DMA Transfer.
+  * @param  hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified UART module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda)
+{
+  /* Process Locked */
+  __HAL_LOCK(hirda);
+
+  if(hirda->gState == HAL_IRDA_STATE_BUSY_TX)
+  {
+    /* Enable the IRDA DMA Tx request */
+    SET_BIT(hirda->Instance->CR3, USART_CR3_DMAT);
+  }
+  if(hirda->RxState == HAL_IRDA_STATE_BUSY_RX)
+  {
+    /* Clear the Overrun flag before resuming the Rx transfer*/
+    __HAL_IRDA_CLEAR_OREFLAG(hirda);
+
+    /* Reenable PE and ERR (Frame error, noise error, overrun error) interrupts */
+    SET_BIT(hirda->Instance->CR1, USART_CR1_PEIE);
+    SET_BIT(hirda->Instance->CR3, USART_CR3_EIE);
+
+    /* Enable the IRDA DMA Rx request */
+    SET_BIT(hirda->Instance->CR3, USART_CR3_DMAR);
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hirda);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stop the DMA Transfer.
+  * @param  hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified UART module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda)
+{
+  /* The Lock is not implemented on this API to allow the user application
+     to call the HAL IRDA API under callbacks HAL_IRDA_TxCpltCallback() / HAL_IRDA_RxCpltCallback() /
+     HAL_IRDA_TxHalfCpltCallback() / HAL_IRDA_RxHalfCpltCallback():
+     indeed, when HAL_DMA_Abort() API is called, the DMA TX/RX Transfer or Half Transfer complete
+     interrupt is generated if the DMA transfer interruption occurs at the middle or at the end of
+     the stream and the corresponding call back is executed. */
+
+  /* Stop IRDA DMA Tx request if ongoing */
+  if ((hirda->gState == HAL_IRDA_STATE_BUSY_TX) &&
+      (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)))
+  {
+    CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT);
+
+    /* Abort the IRDA DMA Tx channel */
+    if(hirda->hdmatx != NULL)
+    {
+      HAL_DMA_Abort(hirda->hdmatx);
+    }
+
+    IRDA_EndTxTransfer(hirda);
+  }
+
+  /* Stop IRDA DMA Rx request if ongoing */
+  if ((hirda->RxState == HAL_IRDA_STATE_BUSY_RX) &&
+      (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)))
+  {
+    CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR);
+
+    /* Abort the IRDA DMA Rx channel */
+    if(hirda->hdmarx != NULL)
+    {
+      HAL_DMA_Abort(hirda->hdmarx);
+    }
+
+    IRDA_EndRxTransfer(hirda);
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Abort ongoing transfers (blocking mode).
+  * @param  hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified UART module.
+  * @note   This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. 
+  *         This procedure performs following operations :
+  *           - Disable IRDA Interrupts (Tx and Rx)
+  *           - Disable the DMA transfer in the peripheral register (if enabled)
+  *           - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode)
+  *           - Set handle State to READY
+  * @note   This procedure is executed in blocking mode : when exiting function, Abort is considered as completed.
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_IRDA_Abort(IRDA_HandleTypeDef *hirda)
+{
+  /* Disable TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
+  CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE));
+  CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE);
+
+  /* Disable the IRDA DMA Tx request if enabled */
+  if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT))
+  {
+    CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT);
+
+    /* Abort the IRDA DMA Tx channel : use blocking DMA Abort API (no callback) */
+    if(hirda->hdmatx != NULL)
+    {
+      /* Set the IRDA DMA Abort callback to Null. 
+         No call back execution at end of DMA abort procedure */
+      hirda->hdmatx->XferAbortCallback = NULL;
+
+      HAL_DMA_Abort(hirda->hdmatx);
+    }
+  }
+
+  /* Disable the IRDA DMA Rx request if enabled */
+  if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR))
+  {
+    CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR);
+
+    /* Abort the IRDA DMA Rx channel : use blocking DMA Abort API (no callback) */
+    if(hirda->hdmarx != NULL)
+    {
+      /* Set the IRDA DMA Abort callback to Null. 
+         No call back execution at end of DMA abort procedure */
+      hirda->hdmarx->XferAbortCallback = NULL;
+
+      HAL_DMA_Abort(hirda->hdmarx);
+    }
+  }
+
+  /* Reset Tx and Rx transfer counters */
+  hirda->TxXferCount = 0U; 
+  hirda->RxXferCount = 0U; 
+
+  /* Clear the Error flags in the ICR register */
+  __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF);
+
+  /* Restore hirda->gState and hirda->RxState to Ready */
+  hirda->gState  = HAL_IRDA_STATE_READY;
+  hirda->RxState = HAL_IRDA_STATE_READY;
+
+  /* Reset Handle ErrorCode to No Error */
+  hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Abort ongoing Transmit transfer (blocking mode).
+  * @param  hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified UART module.
+  * @note   This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. 
+  *         This procedure performs following operations :
+  *           - Disable IRDA Interrupts (Tx)
+  *           - Disable the DMA transfer in the peripheral register (if enabled)
+  *           - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode)
+  *           - Set handle State to READY
+  * @note   This procedure is executed in blocking mode : when exiting function, Abort is considered as completed.
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_IRDA_AbortTransmit(IRDA_HandleTypeDef *hirda)
+{
+  /* Disable TXEIE and TCIE interrupts */
+  CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE));
+
+  /* Disable the IRDA DMA Tx request if enabled */
+  if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT))
+  {
+    CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT);
+
+    /* Abort the IRDA DMA Tx channel : use blocking DMA Abort API (no callback) */
+    if(hirda->hdmatx != NULL)
+    {
+      /* Set the IRDA DMA Abort callback to Null. 
+         No call back execution at end of DMA abort procedure */
+      hirda->hdmatx->XferAbortCallback = NULL;
+
+      HAL_DMA_Abort(hirda->hdmatx);
+    }
+  }
+
+  /* Reset Tx transfer counter */
+  hirda->TxXferCount = 0U; 
+
+  /* Restore hirda->gState to Ready */
+  hirda->gState = HAL_IRDA_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Abort ongoing Receive transfer (blocking mode).
+  * @param  hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified UART module.
+  * @note   This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. 
+  *         This procedure performs following operations :
+  *           - Disable IRDA Interrupts (Rx)
+  *           - Disable the DMA transfer in the peripheral register (if enabled)
+  *           - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode)
+  *           - Set handle State to READY
+  * @note   This procedure is executed in blocking mode : when exiting function, Abort is considered as completed.
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_IRDA_AbortReceive(IRDA_HandleTypeDef *hirda)
+{
+  /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
+  CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE));
+  CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE);
+
+  /* Disable the IRDA DMA Rx request if enabled */
+  if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR))
+  {
+    CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR);
+
+    /* Abort the IRDA DMA Rx channel : use blocking DMA Abort API (no callback) */
+    if(hirda->hdmarx != NULL)
+    {
+      /* Set the IRDA DMA Abort callback to Null. 
+         No call back execution at end of DMA abort procedure */
+      hirda->hdmarx->XferAbortCallback = NULL;
+
+      HAL_DMA_Abort(hirda->hdmarx);
+    }
+  }
+
+  /* Reset Rx transfer counter */
+  hirda->RxXferCount = 0U; 
+
+  /* Clear the Error flags in the ICR register */
+  __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF);
+
+  /* Restore hirda->RxState to Ready */
+  hirda->RxState = HAL_IRDA_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Abort ongoing transfers (Interrupt mode).
+  * @param  hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified UART module.
+  * @note   This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. 
+  *         This procedure performs following operations :
+  *           - Disable IRDA Interrupts (Tx and Rx)
+  *           - Disable the DMA transfer in the peripheral register (if enabled)
+  *           - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode)
+  *           - Set handle State to READY
+  *           - At abort completion, call user abort complete callback
+  * @note   This procedure is executed in Interrupt mode, meaning that abort procedure could be
+  *         considered as completed only when user abort complete callback is executed (not when exiting function).
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_IRDA_Abort_IT(IRDA_HandleTypeDef *hirda)
+{
+  uint32_t abortcplt = 1U;
+  
+  /* Disable TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
+  CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE));
+  CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE);
+
+  /* If DMA Tx and/or DMA Rx Handles are associated to IRDA Handle, DMA Abort complete callbacks should be initialised
+     before any call to DMA Abort functions */
+  /* DMA Tx Handle is valid */
+  if(hirda->hdmatx != NULL)
+  {
+    /* Set DMA Abort Complete callback if IRDA DMA Tx request if enabled.
+       Otherwise, set it to NULL */
+    if(HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT))
+    {
+      hirda->hdmatx->XferAbortCallback = IRDA_DMATxAbortCallback;
+    }
+    else
+    {
+      hirda->hdmatx->XferAbortCallback = NULL;
+    }
+  }
+  /* DMA Rx Handle is valid */
+  if(hirda->hdmarx != NULL)
+  {
+    /* Set DMA Abort Complete callback if IRDA DMA Rx request if enabled.
+       Otherwise, set it to NULL */
+    if(HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR))
+    {
+      hirda->hdmarx->XferAbortCallback = IRDA_DMARxAbortCallback;
+    }
+    else
+    {
+      hirda->hdmarx->XferAbortCallback = NULL;
+    }
+  }
+  
+  /* Disable the IRDA DMA Tx request if enabled */
+  if(HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT))
+  {
+    /* Disable DMA Tx at UART level */
+    CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT);
+
+    /* Abort the IRDA DMA Tx channel : use non blocking DMA Abort API (callback) */
+    if(hirda->hdmatx != NULL)
+    {
+      /* IRDA Tx DMA Abort callback has already been initialised : 
+         will lead to call HAL_IRDA_AbortCpltCallback() at end of DMA abort procedure */
+
+      /* Abort DMA TX */
+      if(HAL_DMA_Abort_IT(hirda->hdmatx) != HAL_OK)
+      {
+        hirda->hdmatx->XferAbortCallback = NULL;
+      }
+      else
+      {
+        abortcplt = 0U;
+      }
+    }
+  }
+
+  /* Disable the IRDA DMA Rx request if enabled */
+  if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR))
+  {
+    CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR);
+
+    /* Abort the IRDA DMA Rx channel : use non blocking DMA Abort API (callback) */
+    if(hirda->hdmarx != NULL)
+    {
+      /* IRDA Rx DMA Abort callback has already been initialised : 
+         will lead to call HAL_IRDA_AbortCpltCallback() at end of DMA abort procedure */
+
+      /* Abort DMA RX */
+      if(HAL_DMA_Abort_IT(hirda->hdmarx) != HAL_OK)
+      {
+        hirda->hdmarx->XferAbortCallback = NULL;
+        abortcplt = 1;
+      }
+      else
+      {
+        abortcplt = 0;
+      }
+    }
+  }
+
+  /* if no DMA abort complete callback execution is required => call user Abort Complete callback */
+  if (abortcplt == 1U)
+  {
+    /* Reset Tx and Rx transfer counters */
+    hirda->TxXferCount = 0U; 
+    hirda->RxXferCount = 0U;
+
+    /* Reset errorCode */
+    hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+
+    /* Clear the Error flags in the ICR register */
+    __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF);
+
+    /* Restore hirda->gState and hirda->RxState to Ready */
+    hirda->gState  = HAL_IRDA_STATE_READY;
+    hirda->RxState = HAL_IRDA_STATE_READY;
+
+    /* As no DMA to be aborted, call directly user Abort complete callback */
+    HAL_IRDA_AbortCpltCallback(hirda);
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Abort ongoing Transmit transfer (Interrupt mode).
+  * @param  hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified UART module.
+  * @note   This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. 
+  *         This procedure performs following operations :
+  *           - Disable IRDA Interrupts (Tx)
+  *           - Disable the DMA transfer in the peripheral register (if enabled)
+  *           - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode)
+  *           - Set handle State to READY
+  *           - At abort completion, call user abort complete callback
+  * @note   This procedure is executed in Interrupt mode, meaning that abort procedure could be
+  *         considered as completed only when user abort complete callback is executed (not when exiting function).
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_IRDA_AbortTransmit_IT(IRDA_HandleTypeDef *hirda)
+{
+  /* Disable TXEIE and TCIE interrupts */
+  CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE));
+
+  /* Disable the IRDA DMA Tx request if enabled */
+  if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT))
+  {
+    CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT);
+
+    /* Abort the IRDA DMA Tx channel : use non blocking DMA Abort API (callback) */
+    if(hirda->hdmatx != NULL)
+    {
+      /* Set the IRDA DMA Abort callback : 
+         will lead to call HAL_IRDA_AbortCpltCallback() at end of DMA abort procedure */
+      hirda->hdmatx->XferAbortCallback = IRDA_DMATxOnlyAbortCallback;
+
+      /* Abort DMA TX */
+      if(HAL_DMA_Abort_IT(hirda->hdmatx) != HAL_OK)
+      {
+        /* Call Directly hirda->hdmatx->XferAbortCallback function in case of error */
+        hirda->hdmatx->XferAbortCallback(hirda->hdmatx);
+      }
+    }
+    else
+    {
+      /* Reset Tx transfer counter */
+      hirda->TxXferCount = 0U; 
+
+      /* Restore hirda->gState to Ready */
+      hirda->gState = HAL_IRDA_STATE_READY;
+
+      /* As no DMA to be aborted, call directly user Abort complete callback */
+      HAL_IRDA_AbortTransmitCpltCallback(hirda);
+    }
+  }
+  else
+  {
+    /* Reset Tx transfer counter */
+    hirda->TxXferCount = 0U; 
+
+    /* Restore hirda->gState to Ready */
+    hirda->gState = HAL_IRDA_STATE_READY;
+
+    /* As no DMA to be aborted, call directly user Abort complete callback */
+    HAL_IRDA_AbortTransmitCpltCallback(hirda);
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Abort ongoing Receive transfer (Interrupt mode).
+  * @param  hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified UART module.
+  * @note   This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. 
+  *         This procedure performs following operations :
+  *           - Disable IRDA Interrupts (Rx)
+  *           - Disable the DMA transfer in the peripheral register (if enabled)
+  *           - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode)
+  *           - Set handle State to READY
+  *           - At abort completion, call user abort complete callback
+  * @note   This procedure is executed in Interrupt mode, meaning that abort procedure could be
+  *         considered as completed only when user abort complete callback is executed (not when exiting function).
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_IRDA_AbortReceive_IT(IRDA_HandleTypeDef *hirda)
+{
+  /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
+  CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE));
+  CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE);
+
+  /* Disable the IRDA DMA Rx request if enabled */
+  if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR))
+  {
+    CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR);
+
+    /* Abort the IRDA DMA Rx channel : use non blocking DMA Abort API (callback) */
+    if(hirda->hdmarx != NULL)
+    {
+      /* Set the IRDA DMA Abort callback : 
+         will lead to call HAL_IRDA_AbortCpltCallback() at end of DMA abort procedure */
+      hirda->hdmarx->XferAbortCallback = IRDA_DMARxOnlyAbortCallback;
+
+      /* Abort DMA RX */
+      if(HAL_DMA_Abort_IT(hirda->hdmarx) != HAL_OK)
+      {
+        /* Call Directly hirda->hdmarx->XferAbortCallback function in case of error */
+        hirda->hdmarx->XferAbortCallback(hirda->hdmarx);
+      }
+    }
+    else
+    {
+      /* Reset Rx transfer counter */
+      hirda->RxXferCount = 0U; 
+
+      /* Clear the Error flags in the ICR register */
+      __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF);
+
+      /* Restore hirda->RxState to Ready */
+      hirda->RxState = HAL_IRDA_STATE_READY;
+
+      /* As no DMA to be aborted, call directly user Abort complete callback */
+      HAL_IRDA_AbortReceiveCpltCallback(hirda);
+    }
+  }
+  else
+  {
+    /* Reset Rx transfer counter */
+    hirda->RxXferCount = 0U; 
+
+    /* Clear the Error flags in the ICR register */
+    __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF);
+
+    /* Restore hirda->RxState to Ready */
+    hirda->RxState = HAL_IRDA_STATE_READY;
+
+    /* As no DMA to be aborted, call directly user Abort complete callback */
+    HAL_IRDA_AbortReceiveCpltCallback(hirda);
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handle IRDA interrupt request.
+  * @param  hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified IRDA module.
+  * @retval None
+  */
+void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda)
+{
+  uint32_t isrflags   = READ_REG(hirda->Instance->ISR);
+  uint32_t cr1its     = READ_REG(hirda->Instance->CR1);
+  uint32_t cr3its;
+  uint32_t errorflags;
+
+  /* If no error occurs */
+  errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE));
+  if (errorflags == RESET)
+  {
+    /* IRDA in mode Receiver ---------------------------------------------------*/
+    if(((isrflags & USART_ISR_RXNE) != RESET) && ((cr1its & USART_CR1_RXNEIE) != RESET))
+    {
+      IRDA_Receive_IT(hirda);
+      return;
+    }
+  }  
+
+  /* If some errors occur */
+  cr3its = READ_REG(hirda->Instance->CR3);
+  if(   (errorflags != RESET) 
+     && (    ((cr3its & USART_CR3_EIE) != RESET)
+          || ((cr1its & (USART_CR1_RXNEIE | USART_CR1_PEIE)) != RESET)) )
+  {
+    /* IRDA parity error interrupt occurred -------------------------------------*/
+    if(((isrflags & USART_ISR_PE) != RESET) && ((cr1its & USART_CR1_PEIE) != RESET))
+    {
+      __HAL_IRDA_CLEAR_IT(hirda, IRDA_CLEAR_PEF);
+
+      hirda->ErrorCode |= HAL_IRDA_ERROR_PE;
+    }
+
+    /* IRDA frame error interrupt occurred --------------------------------------*/
+    if(((isrflags & USART_ISR_FE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET))
+    {
+      __HAL_IRDA_CLEAR_IT(hirda, IRDA_CLEAR_FEF);
+
+      hirda->ErrorCode |= HAL_IRDA_ERROR_FE;
+    }
+
+    /* IRDA noise error interrupt occurred --------------------------------------*/
+    if(((isrflags & USART_ISR_NE) != RESET) && ((cr3its & USART_CR3_EIE) != RESET))
+    {
+      __HAL_IRDA_CLEAR_IT(hirda, IRDA_CLEAR_NEF);
+
+      hirda->ErrorCode |= HAL_IRDA_ERROR_NE;
+    }
+
+    /* IRDA Over-Run interrupt occurred -----------------------------------------*/
+    if(((isrflags & USART_ISR_ORE) != RESET) &&
+       (((cr1its & USART_CR1_RXNEIE) != RESET) || ((cr3its & USART_CR3_EIE) != RESET)))
+    {
+      __HAL_IRDA_CLEAR_IT(hirda, IRDA_CLEAR_OREF);
+
+      hirda->ErrorCode |= HAL_IRDA_ERROR_ORE;
+    }
+
+    /* Call IRDA Error Call back function if need be --------------------------*/
+    if(hirda->ErrorCode != HAL_IRDA_ERROR_NONE)
+    {
+      /* IRDA in mode Receiver ---------------------------------------------------*/
+      if(((isrflags & USART_ISR_RXNE) != RESET) && ((cr1its & USART_CR1_RXNEIE) != RESET))
+      {
+        IRDA_Receive_IT(hirda);
+      }
+
+      /* If Overrun error occurs, or if any error occurs in DMA mode reception,
+         consider error as blocking */
+      if (((hirda->ErrorCode & HAL_IRDA_ERROR_ORE) != RESET) ||
+          (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)))
+      {  
+        /* Blocking error : transfer is aborted
+           Set the IRDA state ready to be able to start again the process,
+           Disable Rx Interrupts, and disable Rx DMA request, if ongoing */
+        IRDA_EndRxTransfer(hirda);
+
+        /* Disable the IRDA DMA Rx request if enabled */
+        if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR))
+        {
+          CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR);
+
+          /* Abort the IRDA DMA Rx channel */
+          if(hirda->hdmarx != NULL)
+          {
+            /* Set the IRDA DMA Abort callback : 
+               will lead to call HAL_IRDA_ErrorCallback() at end of DMA abort procedure */
+            hirda->hdmarx->XferAbortCallback = IRDA_DMAAbortOnError;
+
+            /* Abort DMA RX */
+            if(HAL_DMA_Abort_IT(hirda->hdmarx) != HAL_OK)
+            {
+              /* Call Directly hirda->hdmarx->XferAbortCallback function in case of error */
+              hirda->hdmarx->XferAbortCallback(hirda->hdmarx);
+            }
+          }
+          else
+          {
+            /* Call user error callback */
+            HAL_IRDA_ErrorCallback(hirda);
+          }
+        }
+        else
+        {
+          /* Call user error callback */
+          HAL_IRDA_ErrorCallback(hirda);
+        }
+      }
+      else
+      {
+        /* Non Blocking error : transfer could go on. 
+           Error is notified to user through user error callback */
+        HAL_IRDA_ErrorCallback(hirda);
+        hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+      }
+    }
+    return;
+
+  } /* End if some error occurs */
+
+  /* IRDA in mode Transmitter ------------------------------------------------*/
+  if(((isrflags & USART_ISR_TXE) != RESET) && ((cr1its & USART_CR1_TXEIE) != RESET))
+  {
+    IRDA_Transmit_IT(hirda);
+    return;
+  }
+
+  /* IRDA in mode Transmitter (transmission end) -----------------------------*/
+  if(((isrflags & USART_ISR_TC) != RESET) && ((cr1its & USART_CR1_TCIE) != RESET))
+  {
+    IRDA_EndTransmit_IT(hirda);
+    return;
+  }
+
+}
+
+/**
+  * @brief  Tx Transfer completed callback.
+  * @param  hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified IRDA module.
+  * @retval None
+  */
+__weak void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hirda);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_IRDA_TxCpltCallback can be implemented in the user file.
+   */
+}
+
+/**
+  * @brief  Tx Half Transfer completed callback.
+  * @param  hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified USART module.
+  * @retval None
+  */
+__weak void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hirda);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_IRDA_TxHalfCpltCallback can be implemented in the user file.
+   */
+}
+
+/**
+  * @brief  Rx Transfer completed callback.
+  * @param  hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified IRDA module.
+  * @retval None
+  */
+__weak void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hirda);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_IRDA_RxCpltCallback can be implemented in the user file.
+   */
+}
+
+/**
+  * @brief  Rx Half Transfer complete callback.
+  * @param  hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @retval None
+  */
+__weak void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hirda);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_IRDA_RxHalfCpltCallback can be implemented in the user file.
+   */
+}
+
+/**
+  * @brief  IRDA error callback.
+  * @param  hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified IRDA module.
+  * @retval None
+  */
+__weak void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hirda);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_IRDA_ErrorCallback can be implemented in the user file.
+   */
+}
+
+/**
+  * @brief  IRDA Abort Complete callback.
+  * @param  hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified IRDA module.
+  * @retval None
+  */
+__weak void HAL_IRDA_AbortCpltCallback (IRDA_HandleTypeDef *hirda)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hirda);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_IRDA_AbortCpltCallback can be implemented in the user file.
+   */
+}
+
+/**
+  * @brief  IRDA Abort Complete callback.
+  * @param  hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified IRDA module.
+  * @retval None
+  */
+__weak void HAL_IRDA_AbortTransmitCpltCallback (IRDA_HandleTypeDef *hirda)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hirda);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_IRDA_AbortTransmitCpltCallback can be implemented in the user file.
+   */
+}
+
+/**
+  * @brief  IRDA Abort Receive Complete callback.
+  * @param  hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified IRDA module.
+  * @retval None
+  */
+__weak void HAL_IRDA_AbortReceiveCpltCallback (IRDA_HandleTypeDef *hirda)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hirda);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_IRDA_AbortReceiveCpltCallback can be implemented in the user file.
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_Exported_Functions_Group3 Peripheral State and Error functions
+  *  @brief   IRDA State and Errors functions
+  *
+@verbatim
+  ==============================================================================
+            ##### Peripheral State and Error functions #####
+  ==============================================================================
+  [..]
+    This subsection provides a set of functions allowing to return the State of IrDA
+    communication process and also return Peripheral Errors occurred during communication process
+     (+) HAL_IRDA_GetState() API can be helpful to check in run-time the state
+         of the IRDA peripheral handle.
+     (+) HAL_IRDA_GetError() checks in run-time errors that could occur during
+         communication.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Return the IRDA handle state.
+  * @param  hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified IRDA module.
+  * @retval HAL state
+  */
+HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda)
+{
+  /* Return IRDA handle state */
+  uint32_t temp1= 0x00U, temp2 = 0x00U;
+  temp1 = hirda->gState;
+  temp2 = hirda->RxState;
+
+  return (HAL_IRDA_StateTypeDef)(temp1 | temp2);
+}
+
+/**
+  * @brief  Return the IRDA handle error code.
+  * @param  hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified IRDA module.
+  * @retval IRDA Error Code
+  */
+uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda)
+{
+  return hirda->ErrorCode;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_Private_Functions IRDA Private Functions
+  * @{
+  */
+
+/**
+  * @brief  Configure the IRDA peripheral.
+  * @param  hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified IRDA module.
+  * @retval None
+  */
+static HAL_StatusTypeDef IRDA_SetConfig(IRDA_HandleTypeDef *hirda)
+{
+  uint32_t tmpreg                     = 0x00000000U;
+  IRDA_ClockSourceTypeDef clocksource = IRDA_CLOCKSOURCE_UNDEFINED;
+  HAL_StatusTypeDef ret               = HAL_OK;
+
+  /* Check the communication parameters */
+  assert_param(IS_IRDA_BAUDRATE(hirda->Init.BaudRate));
+  assert_param(IS_IRDA_WORD_LENGTH(hirda->Init.WordLength));
+  assert_param(IS_IRDA_PARITY(hirda->Init.Parity));
+  assert_param(IS_IRDA_TX_RX_MODE(hirda->Init.Mode));
+  assert_param(IS_IRDA_PRESCALER(hirda->Init.Prescaler));
+  assert_param(IS_IRDA_POWERMODE(hirda->Init.PowerMode));
+
+  /*-------------------------- USART CR1 Configuration -----------------------*/
+  /* Configure the IRDA Word Length, Parity and transfer Mode:
+     Set the M bits according to hirda->Init.WordLength value
+     Set PCE and PS bits according to hirda->Init.Parity value
+     Set TE and RE bits according to hirda->Init.Mode value */
+  tmpreg = (uint32_t)hirda->Init.WordLength | hirda->Init.Parity | hirda->Init.Mode ;
+
+  MODIFY_REG(hirda->Instance->CR1, IRDA_CR1_FIELDS, tmpreg);
+
+  /*-------------------------- USART CR3 Configuration -----------------------*/
+  MODIFY_REG(hirda->Instance->CR3, USART_CR3_IRLP, hirda->Init.PowerMode);
+
+  /*-------------------------- USART GTPR Configuration ----------------------*/
+  MODIFY_REG(hirda->Instance->GTPR, USART_GTPR_PSC, hirda->Init.Prescaler);
+
+  /*-------------------------- USART BRR Configuration -----------------------*/
+  IRDA_GETCLOCKSOURCE(hirda, clocksource);
+  switch (clocksource)
+  {
+    case IRDA_CLOCKSOURCE_PCLK1:
+      hirda->Instance->BRR = (uint16_t)((HAL_RCC_GetPCLK1Freq() + (hirda->Init.BaudRate/2)) / hirda->Init.BaudRate);
+      break;
+    case IRDA_CLOCKSOURCE_HSI:
+      hirda->Instance->BRR = (uint16_t)((HSI_VALUE + (hirda->Init.BaudRate/2)) / hirda->Init.BaudRate);
+      break;
+    case IRDA_CLOCKSOURCE_SYSCLK:
+      hirda->Instance->BRR = (uint16_t)((HAL_RCC_GetSysClockFreq() + (hirda->Init.BaudRate/2)) / hirda->Init.BaudRate);
+      break;
+    case IRDA_CLOCKSOURCE_LSE:
+      hirda->Instance->BRR = (uint16_t)((LSE_VALUE  + (hirda->Init.BaudRate/2)) / hirda->Init.BaudRate);
+      break;
+    case IRDA_CLOCKSOURCE_UNDEFINED:
+    default:
+      ret = HAL_ERROR;
+      break;
+  }
+
+  return ret;
+}
+
+/**
+  * @brief  Check the IRDA Idle State.
+  * @param  hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified IRDA module.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef IRDA_CheckIdleState(IRDA_HandleTypeDef *hirda)
+{
+  uint32_t tickstart = 0U;
+
+  /* Initialize the IRDA ErrorCode */
+  hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+
+  /* Init tickstart for timeout managment*/
+  tickstart = HAL_GetTick();
+
+  /* TEACK and REACK bits in ISR are checked only when available (not available on all F0 devices).
+     Bits are defined for some specific devices, and are available only for UART instances supporting WakeUp from Stop Mode feature. 
+  */
+#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC)
+  if (IS_UART_WAKEUP_FROMSTOP_INSTANCE(hirda->Instance))
+  {
+    /* Check if the Transmitter is enabled */
+    if((hirda->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE)
+    {
+      /* Wait until TEACK flag is set */
+      if(IRDA_WaitOnFlagUntilTimeout(hirda, USART_ISR_TEACK, RESET, tickstart, IRDA_TEACK_REACK_TIMEOUT) != HAL_OK)
+      {
+        /* Timeout occurred */
+        return HAL_TIMEOUT;
+      }
+    }
+
+  /* Check if the Receiver is enabled */
+    if((hirda->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE)
+    {
+      /* Wait until REACK flag is set */
+      if(IRDA_WaitOnFlagUntilTimeout(hirda, USART_ISR_REACK, RESET, tickstart, IRDA_TEACK_REACK_TIMEOUT) != HAL_OK)
+      {
+        /* Timeout occurred */
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
+
+  /* Initialize the IRDA state*/
+  hirda->gState  = HAL_IRDA_STATE_READY;
+  hirda->RxState = HAL_IRDA_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hirda);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handle IRDA Communication Timeout.
+  * @param  hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified IRDA module.
+  * @param  Flag Specifies the IRDA flag to check.
+  * @param  Status the new flag status (SET or RESET). The function is locked in a while loop as long as the flag remains set to Status.
+  * @param  Tickstart Tick start value
+  * @param  Timeout Timeout duration
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef IRDA_WaitOnFlagUntilTimeout(IRDA_HandleTypeDef *hirda, uint32_t Flag, FlagStatus Status, uint32_t Tickstart, uint32_t Timeout)
+{
+  /* Wait until flag is set */
+  while((__HAL_IRDA_GET_FLAG(hirda, Flag) ? SET : RESET) == Status)
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0U) || ((HAL_GetTick()-Tickstart) > Timeout))
+      {
+        /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+        CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE));
+        CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE);
+
+        hirda->gState  = HAL_IRDA_STATE_READY;
+        hirda->RxState = HAL_IRDA_STATE_READY;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hirda);
+
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  End ongoing Tx transfer on IRDA peripheral (following error detection or Transmit completion).
+  * @param  hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified IRDA module.
+  * @retval None
+  */
+static void IRDA_EndTxTransfer(IRDA_HandleTypeDef *hirda)
+{
+  /* Disable TXEIE and TCIE interrupts */
+  CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE));
+
+  /* At end of Tx process, restore hirda->gState to Ready */
+  hirda->gState = HAL_IRDA_STATE_READY;
+}
+
+
+/**
+  * @brief  End ongoing Rx transfer on UART peripheral (following error detection or Reception completion).
+  * @param  hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified IRDA module.
+  * @retval None
+  */
+static void IRDA_EndRxTransfer(IRDA_HandleTypeDef *hirda)
+{
+  /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
+  CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE));
+  CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE);
+
+  /* At end of Rx process, restore hirda->RxState to Ready */
+  hirda->RxState = HAL_IRDA_STATE_READY;
+}
+
+
+/**
+  * @brief  DMA IRDA transmit process complete callback.
+  * @param  hdma Pointer to a DMA_HandleTypeDef structure that contains
+  *              the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void IRDA_DMATransmitCplt(DMA_HandleTypeDef *hdma)
+{
+  IRDA_HandleTypeDef* hirda = (IRDA_HandleTypeDef*)(hdma->Parent);
+
+  /* DMA Normal mode */
+  if ( HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC) )
+  {
+    hirda->TxXferCount = 0U;
+
+    /* Disable the DMA transfer for transmit request by resetting the DMAT bit
+       in the IRDA CR3 register */
+    CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT);
+
+    /* Enable the IRDA Transmit Complete Interrupt */
+    SET_BIT(hirda->Instance->CR1, USART_CR1_TCIE);
+  }
+  /* DMA Circular mode */
+  else
+  {
+    HAL_IRDA_TxCpltCallback(hirda);
+  }
+
+}
+
+/**
+  * @brief  DMA IRDA transmit process half complete callback.
+  * @param  hdma Pointer to a DMA_HandleTypeDef structure that contains
+  *              the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void IRDA_DMATransmitHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  IRDA_HandleTypeDef* hirda = (IRDA_HandleTypeDef*)(hdma->Parent);
+
+  HAL_IRDA_TxHalfCpltCallback(hirda);
+}
+
+/**
+  * @brief  DMA IRDA receive process complete callback.
+  * @param  hdma Pointer to a DMA_HandleTypeDef structure that contains
+  *               the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void IRDA_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+  IRDA_HandleTypeDef* hirda = (IRDA_HandleTypeDef*)(hdma->Parent);
+
+  /* DMA Normal mode */
+  if ( HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC) )
+  {
+    hirda->RxXferCount = 0U;
+
+    /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */
+    CLEAR_BIT(hirda->Instance->CR1, USART_CR1_PEIE);
+    CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE);
+
+    /* Disable the DMA transfer for the receiver request by resetting the DMAR bit
+       in the IRDA CR3 register */
+    CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR);
+
+    /* At end of Rx process, restore hirda->RxState to Ready */
+    hirda->RxState = HAL_IRDA_STATE_READY;
+  }
+
+  HAL_IRDA_RxCpltCallback(hirda);
+}
+
+/**
+  * @brief DMA IRDA receive process half complete callback.
+  * @param hdma Pointer to a DMA_HandleTypeDef structure that contains
+  *              the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void IRDA_DMAReceiveHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  IRDA_HandleTypeDef* hirda = (IRDA_HandleTypeDef*)(hdma->Parent);
+
+  HAL_IRDA_RxHalfCpltCallback(hirda);
+}
+
+/**
+  * @brief  DMA IRDA communication error callback.
+  * @param  hdma Pointer to a DMA_HandleTypeDef structure that contains
+  *              the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void IRDA_DMAError(DMA_HandleTypeDef *hdma)
+{
+  IRDA_HandleTypeDef* hirda = (IRDA_HandleTypeDef*)(hdma->Parent);
+
+  /* Stop IRDA DMA Tx request if ongoing */
+  if (  (hirda->gState == HAL_IRDA_STATE_BUSY_TX)
+      &&(HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) )
+  {
+    hirda->TxXferCount = 0U;
+    IRDA_EndTxTransfer(hirda);
+  }
+
+  /* Stop IRDA DMA Rx request if ongoing */
+  if (  (hirda->RxState == HAL_IRDA_STATE_BUSY_RX)
+      &&(HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) )
+  {
+    hirda->RxXferCount = 0;
+    IRDA_EndRxTransfer(hirda);
+  }
+
+  hirda->ErrorCode |= HAL_IRDA_ERROR_DMA;
+  HAL_IRDA_ErrorCallback(hirda);
+}
+
+/**
+  * @brief  DMA IRDA communication abort callback, when initiated by HAL services on Error
+  *         (To be called at end of DMA Abort procedure following error occurrence).
+  * @param  hdma DMA handle.
+  * @retval None
+  */
+static void IRDA_DMAAbortOnError(DMA_HandleTypeDef *hdma)
+{
+  IRDA_HandleTypeDef* hirda = (IRDA_HandleTypeDef*)(hdma->Parent);
+  hirda->RxXferCount = 0U;
+  hirda->TxXferCount = 0U;
+
+  HAL_IRDA_ErrorCallback(hirda);
+}
+
+/**
+  * @brief  DMA IRDA Tx communication abort callback, when initiated by user
+  *         (To be called at end of DMA Tx Abort procedure following user abort request).
+  * @note   When this callback is executed, User Abort complete call back is called only if no
+  *         Abort still ongoing for Rx DMA Handle.
+  * @param  hdma DMA handle.
+  * @retval None
+  */
+static void IRDA_DMATxAbortCallback(DMA_HandleTypeDef *hdma)
+{
+  IRDA_HandleTypeDef* hirda = (IRDA_HandleTypeDef* )(hdma->Parent);
+  
+  hirda->hdmatx->XferAbortCallback = NULL;
+
+  /* Check if an Abort process is still ongoing */
+  if(hirda->hdmarx != NULL)
+  {
+    if(hirda->hdmarx->XferAbortCallback != NULL)
+    {
+      return;
+    }
+  }
+  
+  /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */
+  hirda->TxXferCount = 0U;
+  hirda->RxXferCount = 0U;
+
+  /* Reset errorCode */
+  hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+
+  /* Clear the Error flags in the ICR register */
+  __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF);
+
+  /* Restore hirda->gState and hirda->RxState to Ready */
+  hirda->gState  = HAL_IRDA_STATE_READY;
+  hirda->RxState = HAL_IRDA_STATE_READY;
+
+  /* Call user Abort complete callback */
+  HAL_IRDA_AbortCpltCallback(hirda);
+}
+
+
+/**
+  * @brief  DMA IRDA Rx communication abort callback, when initiated by user
+  *         (To be called at end of DMA Rx Abort procedure following user abort request).
+  * @note   When this callback is executed, User Abort complete call back is called only if no
+  *         Abort still ongoing for Tx DMA Handle.
+  * @param  hdma DMA handle.
+  * @retval None
+  */
+static void IRDA_DMARxAbortCallback(DMA_HandleTypeDef *hdma)
+{
+  IRDA_HandleTypeDef* hirda = (IRDA_HandleTypeDef* )(hdma->Parent);
+  
+  hirda->hdmarx->XferAbortCallback = NULL;
+
+  /* Check if an Abort process is still ongoing */
+  if(hirda->hdmatx != NULL)
+  {
+    if(hirda->hdmatx->XferAbortCallback != NULL)
+    {
+      return;
+    }
+  }
+  
+  /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */
+  hirda->TxXferCount = 0U;
+  hirda->RxXferCount = 0U;
+
+  /* Reset errorCode */
+  hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+
+  /* Clear the Error flags in the ICR register */
+  __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF);
+
+  /* Restore hirda->gState and hirda->RxState to Ready */
+  hirda->gState  = HAL_IRDA_STATE_READY;
+  hirda->RxState = HAL_IRDA_STATE_READY;
+
+  /* Call user Abort complete callback */
+  HAL_IRDA_AbortCpltCallback(hirda);
+}
+
+
+/**
+  * @brief  DMA IRDA Tx communication abort callback, when initiated by user by a call to
+  *         HAL_IRDA_AbortTransmit_IT API (Abort only Tx transfer)
+  *         (This callback is executed at end of DMA Tx Abort procedure following user abort request,
+  *         and leads to user Tx Abort Complete callback execution).
+  * @param  hdma DMA handle.
+  * @retval None
+  */
+static void IRDA_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma)
+{
+  IRDA_HandleTypeDef* hirda = (IRDA_HandleTypeDef*)(hdma->Parent);
+
+  hirda->TxXferCount = 0U;
+
+  /* Restore hirda->gState to Ready */
+  hirda->gState = HAL_IRDA_STATE_READY;
+
+  /* Call user Abort complete callback */
+  HAL_IRDA_AbortTransmitCpltCallback(hirda);
+}
+
+/**
+  * @brief  DMA IRDA Rx communication abort callback, when initiated by user by a call to
+  *         HAL_IRDA_AbortReceive_IT API (Abort only Rx transfer)
+  *         (This callback is executed at end of DMA Rx Abort procedure following user abort request,
+  *         and leads to user Rx Abort Complete callback execution).
+  * @param  hdma DMA handle.
+  * @retval None
+  */
+static void IRDA_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma)
+{
+  IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  hirda->RxXferCount = 0U;
+
+  /* Clear the Error flags in the ICR register */
+  __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF);
+
+  /* Restore hirda->RxState to Ready */
+  hirda->RxState = HAL_IRDA_STATE_READY;
+
+  /* Call user Abort complete callback */
+  HAL_IRDA_AbortReceiveCpltCallback(hirda);
+}
+
+/**
+  * @brief  Send an amount of data in interrupt mode.
+  * @note   Function is called under interruption only, once
+  *         interruptions have been enabled by HAL_IRDA_Transmit_IT().
+  * @param  hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified IRDA module.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda)
+{
+  uint16_t* tmp;
+
+  /* Check that a Tx process is ongoing */
+  if(hirda->gState == HAL_IRDA_STATE_BUSY_TX)
+  {
+    if(hirda->TxXferCount == 0U)
+    {
+      /* Disable the IRDA Transmit Data Register Empty Interrupt */
+      CLEAR_BIT(hirda->Instance->CR1, USART_CR1_TXEIE);
+
+      /* Enable the IRDA Transmit Complete Interrupt */
+      SET_BIT(hirda->Instance->CR1, USART_CR1_TCIE);
+
+      return HAL_OK;
+    }
+    else
+    {
+      if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE))
+      {
+        tmp = (uint16_t*) hirda->pTxBuffPtr;
+        hirda->Instance->TDR = (*tmp & (uint16_t)0x01FFU);
+        hirda->pTxBuffPtr += 2U;
+      }
+      else
+      {
+        hirda->Instance->TDR = (uint8_t)(*hirda->pTxBuffPtr++ & (uint8_t)0xFFU);
+      }
+      hirda->TxXferCount--;
+
+      return HAL_OK;
+    }
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Wrap up transmission in non-blocking mode.
+  * @param  hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified IRDA module.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef IRDA_EndTransmit_IT(IRDA_HandleTypeDef *hirda)
+{
+  /* Disable the IRDA Transmit Complete Interrupt */
+  CLEAR_BIT(hirda->Instance->CR1, USART_CR1_TCIE);
+
+  /* Tx process is ended, restore hirda->gState to Ready */
+  hirda->gState = HAL_IRDA_STATE_READY;
+
+  HAL_IRDA_TxCpltCallback(hirda);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Receive an amount of data in interrupt mode.
+  * @note   Function is called under interruption only, once
+  *         interruptions have been enabled by HAL_IRDA_Receive_IT()
+  * @param  hirda Pointer to a IRDA_HandleTypeDef structure that contains
+  *               the configuration information for the specified IRDA module.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef IRDA_Receive_IT(IRDA_HandleTypeDef *hirda)
+{
+  uint16_t* tmp;
+  uint16_t  uhMask = hirda->Mask;
+  uint16_t  uhdata;
+
+  /* Check that a Rx process is ongoing */
+  if (hirda->RxState == HAL_IRDA_STATE_BUSY_RX)
+  {
+    uhdata = (uint16_t) READ_REG(hirda->Instance->RDR);
+    if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE))
+    {
+      tmp = (uint16_t*) hirda->pRxBuffPtr ;
+      *tmp = (uint16_t)(uhdata & uhMask);
+      hirda->pRxBuffPtr +=2U;
+    }
+    else
+    {
+      *hirda->pRxBuffPtr++ = (uint8_t)(uhdata & (uint8_t)uhMask);
+    }
+
+    if(--hirda->RxXferCount == 0U)
+    {
+      /* Disable the IRDA Parity Error Interrupt and RXNE interrupt */
+      CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE));
+
+      /* Disable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */
+      CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE);
+
+      /* Rx process is completed, restore hirda->RxState to Ready */
+      hirda->RxState = HAL_IRDA_STATE_READY;
+
+      HAL_IRDA_RxCpltCallback(hirda);
+
+      return HAL_OK;
+    }
+
+    return HAL_OK;
+  }
+  else
+  {
+    /* Clear RXNE interrupt flag */
+    __HAL_IRDA_SEND_REQ(hirda, IRDA_RXDATA_FLUSH_REQUEST);
+
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_IRDA_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/