lib: Add SAM4E CMSIS HAL

Obtained from Atmel.SAM4E_DFP.1.1.57.atpack

Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>

1 files changed, 92 insertions, 0 deletions

diff --git a/lib/cmsis-sam4e/include/instance/usart1.h b/lib/cmsis-sam4e/include/instance/usart1.h
new file mode 100644
index 00000000..b84321d4
--- /dev/null
+++ b/lib/cmsis-sam4e/include/instance/usart1.h
@@ -0,0 +1,92 @@
+/* ---------------------------------------------------------------------------- */
+/*                  Atmel Microcontroller Software Support                      */
+/*                       SAM Software Package License                           */
+/* ---------------------------------------------------------------------------- */
+/* Copyright (c) %copyright_year%, Atmel Corporation                                        */
+/*                                                                              */
+/* All rights reserved.                                                         */
+/*                                                                              */
+/* Redistribution and use in source and binary forms, with or without           */
+/* modification, are permitted provided that the following condition is met:    */
+/*                                                                              */
+/* - Redistributions of source code must retain the above copyright notice,     */
+/* this list of conditions and the disclaimer below.                            */
+/*                                                                              */
+/* Atmel's name may not be used to endorse or promote products derived from     */
+/* this software without specific prior written permission.                     */
+/*                                                                              */
+/* DISCLAIMER:  THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR   */
+/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */
+/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE   */
+/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,      */
+/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */
+/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,  */
+/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF    */
+/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING         */
+/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
+/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.                           */
+/* ---------------------------------------------------------------------------- */
+
+#ifndef _SAM4E_USART1_INSTANCE_
+#define _SAM4E_USART1_INSTANCE_
+
+/* ========== Register definition for USART1 peripheral ========== */
+#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+#define REG_USART1_CR          (0x400A4000U) /**< \brief (USART1) Control Register */
+#define REG_USART1_MR          (0x400A4004U) /**< \brief (USART1) Mode Register */
+#define REG_USART1_IER          (0x400A4008U) /**< \brief (USART1) Interrupt Enable Register */
+#define REG_USART1_IDR          (0x400A400CU) /**< \brief (USART1) Interrupt Disable Register */
+#define REG_USART1_IMR          (0x400A4010U) /**< \brief (USART1) Interrupt Mask Register */
+#define REG_USART1_CSR          (0x400A4014U) /**< \brief (USART1) Channel Status Register */
+#define REG_USART1_RHR          (0x400A4018U) /**< \brief (USART1) Receiver Holding Register */
+#define REG_USART1_THR          (0x400A401CU) /**< \brief (USART1) Transmitter Holding Register */
+#define REG_USART1_BRGR          (0x400A4020U) /**< \brief (USART1) Baud Rate Generator Register */
+#define REG_USART1_RTOR          (0x400A4024U) /**< \brief (USART1) Receiver Time-out Register */
+#define REG_USART1_TTGR          (0x400A4028U) /**< \brief (USART1) Transmitter Timeguard Register */
+#define REG_USART1_FIDI          (0x400A4040U) /**< \brief (USART1) FI DI Ratio Register */
+#define REG_USART1_NER          (0x400A4044U) /**< \brief (USART1) Number of Errors Register */
+#define REG_USART1_IF          (0x400A404CU) /**< \brief (USART1) IrDA Filter Register */
+#define REG_USART1_MAN          (0x400A4050U) /**< \brief (USART1) Manchester Encoder Decoder Register */
+#define REG_USART1_WPMR          (0x400A40E4U) /**< \brief (USART1) Write Protect Mode Register */
+#define REG_USART1_WPSR          (0x400A40E8U) /**< \brief (USART1) Write Protect Status Register */
+#define REG_USART1_RPR          (0x400A4100U) /**< \brief (USART1) Receive Pointer Register */
+#define REG_USART1_RCR          (0x400A4104U) /**< \brief (USART1) Receive Counter Register */
+#define REG_USART1_TPR          (0x400A4108U) /**< \brief (USART1) Transmit Pointer Register */
+#define REG_USART1_TCR          (0x400A410CU) /**< \brief (USART1) Transmit Counter Register */
+#define REG_USART1_RNPR          (0x400A4110U) /**< \brief (USART1) Receive Next Pointer Register */
+#define REG_USART1_RNCR          (0x400A4114U) /**< \brief (USART1) Receive Next Counter Register */
+#define REG_USART1_TNPR          (0x400A4118U) /**< \brief (USART1) Transmit Next Pointer Register */
+#define REG_USART1_TNCR          (0x400A411CU) /**< \brief (USART1) Transmit Next Counter Register */
+#define REG_USART1_PTCR          (0x400A4120U) /**< \brief (USART1) Transfer Control Register */
+#define REG_USART1_PTSR          (0x400A4124U) /**< \brief (USART1) Transfer Status Register */
+#else
+#define REG_USART1_CR (*(WoReg*)0x400A4000U) /**< \brief (USART1) Control Register */
+#define REG_USART1_MR (*(RwReg*)0x400A4004U) /**< \brief (USART1) Mode Register */
+#define REG_USART1_IER (*(WoReg*)0x400A4008U) /**< \brief (USART1) Interrupt Enable Register */
+#define REG_USART1_IDR (*(WoReg*)0x400A400CU) /**< \brief (USART1) Interrupt Disable Register */
+#define REG_USART1_IMR (*(RoReg*)0x400A4010U) /**< \brief (USART1) Interrupt Mask Register */
+#define REG_USART1_CSR (*(RoReg*)0x400A4014U) /**< \brief (USART1) Channel Status Register */
+#define REG_USART1_RHR (*(RoReg*)0x400A4018U) /**< \brief (USART1) Receiver Holding Register */
+#define REG_USART1_THR (*(WoReg*)0x400A401CU) /**< \brief (USART1) Transmitter Holding Register */
+#define REG_USART1_BRGR (*(RwReg*)0x400A4020U) /**< \brief (USART1) Baud Rate Generator Register */
+#define REG_USART1_RTOR (*(RwReg*)0x400A4024U) /**< \brief (USART1) Receiver Time-out Register */
+#define REG_USART1_TTGR (*(RwReg*)0x400A4028U) /**< \brief (USART1) Transmitter Timeguard Register */
+#define REG_USART1_FIDI (*(RwReg*)0x400A4040U) /**< \brief (USART1) FI DI Ratio Register */
+#define REG_USART1_NER (*(RoReg*)0x400A4044U) /**< \brief (USART1) Number of Errors Register */
+#define REG_USART1_IF (*(RwReg*)0x400A404CU) /**< \brief (USART1) IrDA Filter Register */
+#define REG_USART1_MAN (*(RwReg*)0x400A4050U) /**< \brief (USART1) Manchester Encoder Decoder Register */
+#define REG_USART1_WPMR (*(RwReg*)0x400A40E4U) /**< \brief (USART1) Write Protect Mode Register */
+#define REG_USART1_WPSR (*(RoReg*)0x400A40E8U) /**< \brief (USART1) Write Protect Status Register */
+#define REG_USART1_RPR (*(RwReg*)0x400A4100U) /**< \brief (USART1) Receive Pointer Register */
+#define REG_USART1_RCR (*(RwReg*)0x400A4104U) /**< \brief (USART1) Receive Counter Register */
+#define REG_USART1_TPR (*(RwReg*)0x400A4108U) /**< \brief (USART1) Transmit Pointer Register */
+#define REG_USART1_TCR (*(RwReg*)0x400A410CU) /**< \brief (USART1) Transmit Counter Register */
+#define REG_USART1_RNPR (*(RwReg*)0x400A4110U) /**< \brief (USART1) Receive Next Pointer Register */
+#define REG_USART1_RNCR (*(RwReg*)0x400A4114U) /**< \brief (USART1) Receive Next Counter Register */
+#define REG_USART1_TNPR (*(RwReg*)0x400A4118U) /**< \brief (USART1) Transmit Next Pointer Register */
+#define REG_USART1_TNCR (*(RwReg*)0x400A411CU) /**< \brief (USART1) Transmit Next Counter Register */
+#define REG_USART1_PTCR (*(WoReg*)0x400A4120U) /**< \brief (USART1) Transfer Control Register */
+#define REG_USART1_PTSR (*(RoReg*)0x400A4124U) /**< \brief (USART1) Transfer Status Register */
+#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#endif /* _SAM4E_USART1_INSTANCE_ */