lib: Remove the (now unused) cmsis-sam3x8e directory

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

1 files changed, 0 insertions, 295 deletions

diff --git a/lib/cmsis-sam3x8e/source/gcc/startup_sam3xa.c b/lib/cmsis-sam3x8e/source/gcc/startup_sam3xa.c
deleted file mode 100644
index 1f61b079..00000000
--- a/lib/cmsis-sam3x8e/source/gcc/startup_sam3xa.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/* ----------------------------------------------------------------------------
- *         SAM Software Package License
- * ----------------------------------------------------------------------------
- * Copyright (c) 2012, Atmel Corporation
- *
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following condition is met:
- *
- * - Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the disclaimer below.
- *
- * Atmel's name may not be used to endorse or promote products derived from
- * this software without specific prior written permission.
- *
- * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
- * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
- * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- * ----------------------------------------------------------------------------
- */
-
-#include "sam3xa.h"
-
-/* Initialize segments */
-extern uint32_t _sfixed;
-extern uint32_t _efixed;
-extern uint32_t _etext;
-extern uint32_t _srelocate;
-extern uint32_t _erelocate;
-extern uint32_t _szero;
-extern uint32_t _ezero;
-extern uint32_t _sstack;
-extern uint32_t _estack;
-
-/** \cond DOXYGEN_SHOULD_SKIP_THIS */
-int main(void);
-/** \endcond */
-
-// Arduino: we must setup hardware before doing this
-// void __libc_init_array(void);
-
-/* Default empty handler */
-void Dummy_Handler(void);
-
-/* Cortex-M3 core handlers */
-void NMI_Handler        ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-void HardFault_Handler  ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-void MemManage_Handler  ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-void BusFault_Handler   ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-void UsageFault_Handler ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-void SVC_Handler        ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-void DebugMon_Handler   ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-void PendSV_Handler     ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-void SysTick_Handler    ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-
-/* Peripherals handlers */
-void SUPC_Handler       ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-void RSTC_Handler       ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-void RTC_Handler        ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-void RTT_Handler        ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-void WDT_Handler        ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-void PMC_Handler        ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-void EFC0_Handler       ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-void EFC1_Handler       ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-void UART_Handler       ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-#ifdef _SAM3XA_SMC_INSTANCE_
-void SMC_Handler        ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-#endif /* _SAM3XA_SMC_INSTANCE_ */
-#ifdef _SAM3XA_SDRAMC_INSTANCE_
-void SDRAMC_Handler     ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-#endif /* _SAM3XA_SDRAMC_INSTANCE_ */
-void PIOA_Handler       ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-void PIOB_Handler       ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-#ifdef _SAM3XA_PIOC_INSTANCE_
-void PIOC_Handler       ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-#endif /* _SAM3XA_PIOC_INSTANCE_ */
-#ifdef _SAM3XA_PIOD_INSTANCE_
-void PIOD_Handler       ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-#endif /* _SAM3XA_PIOD_INSTANCE_ */
-#ifdef _SAM3XA_PIOE_INSTANCE_
-void PIOE_Handler       ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-#endif /* _SAM3XA_PIOE_INSTANCE_ */
-#ifdef _SAM3XA_PIOF_INSTANCE_
-void PIOF_Handler       ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-#endif /* _SAM3XA_PIOF_INSTANCE_ */
-void USART0_Handler     ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-void USART1_Handler     ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-void USART2_Handler     ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-#ifdef _SAM3XA_USART3_INSTANCE_
-void USART3_Handler     ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-#endif /* _SAM3XA_USART3_INSTANCE_ */
-void HSMCI_Handler      ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-void TWI0_Handler       ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-void TWI1_Handler       ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-void SPI0_Handler       ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-#ifdef _SAM3XA_SPI1_INSTANCE_
-void SPI1_Handler       ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-#endif /* _SAM3XA_SPI1_INSTANCE_ */
-void SSC_Handler        ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-void TC0_Handler        ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-void TC1_Handler        ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-void TC2_Handler        ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-void TC3_Handler        ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-void TC4_Handler        ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-void TC5_Handler        ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-#ifdef _SAM3XA_TC2_INSTANCE_
-void TC6_Handler        ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-void TC7_Handler        ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-void TC8_Handler        ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-#endif /* _SAM3XA_TC2_INSTANCE_ */
-void PWM_Handler        ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-void ADC_Handler        ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-void DACC_Handler       ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-void DMAC_Handler       ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-void UOTGHS_Handler     ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-void TRNG_Handler       ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-#ifdef _SAM3XA_EMAC_INSTANCE_
-void EMAC_Handler       ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-#endif /* _SAM3XA_EMAC_INSTANCE_ */
-void CAN0_Handler       ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-void CAN1_Handler       ( void ) __attribute__ ((weak, alias("Dummy_Handler")));
-
-/* Exception Table */
-__attribute__ ((section(".vectors"))) __attribute__((externally_visible))
-const DeviceVectors exception_table = {
-
-	/* Configure Initial Stack Pointer, using linker-generated symbols */
-	(void*) (&_estack),
-	(void*) Reset_Handler,
-
-	(void*) NMI_Handler,
-	(void*) HardFault_Handler,
-	(void*) MemManage_Handler,
-	(void*) BusFault_Handler,
-	(void*) UsageFault_Handler,
-	(void*) (0UL),           /* Reserved */
-	(void*) (0UL),           /* Reserved */
-	(void*) (0UL),           /* Reserved */
-	(void*) (0UL),           /* Reserved */
-	(void*) SVC_Handler,
-	(void*) DebugMon_Handler,
-	(void*) (0UL),           /* Reserved */
-	(void*) PendSV_Handler,
-	(void*) SysTick_Handler,
-
-	/* Configurable interrupts */
-	(void*) SUPC_Handler,    /*  0  Supply Controller */
-	(void*) RSTC_Handler,    /*  1  Reset Controller */
-	(void*) RTC_Handler,     /*  2  Real Time Clock */
-	(void*) RTT_Handler,     /*  3  Real Time Timer */
-	(void*) WDT_Handler,     /*  4  Watchdog Timer */
-	(void*) PMC_Handler,     /*  5  PMC */
-	(void*) EFC0_Handler,    /*  6  EFC 0 */
-	(void*) EFC1_Handler,    /*  7  EFC 1 */
-	(void*) UART_Handler,    /*  8  UART */
-#ifdef _SAM3XA_SMC_INSTANCE_
-	(void*) SMC_Handler,     /*  9  SMC */
-#else
-	(void*) (0UL),           /*  9 Reserved */
-#endif /* _SAM3XA_SMC_INSTANCE_ */
-#ifdef _SAM3XA_SDRAMC_INSTANCE_
-	(void*) SDRAMC_Handler,  /* 10  SDRAMC */
-#else
-	(void*) (0UL),           /* 10 Reserved */
-#endif /* _SAM3XA_SDRAMC_INSTANCE_ */
-	(void*) PIOA_Handler,    /* 11 Parallel IO Controller A */
-	(void*) PIOB_Handler,    /* 12 Parallel IO Controller B */
-#ifdef _SAM3XA_PIOC_INSTANCE_
-	(void*) PIOC_Handler,    /* 13 Parallel IO Controller C */
-#else
-	(void*) (0UL),           /* 13 Reserved */
-#endif /* _SAM3XA_PIOC_INSTANCE_ */
-#ifdef _SAM3XA_PIOD_INSTANCE_
-	(void*) PIOD_Handler,    /* 14 Parallel IO Controller D */
-#else
-	(void*) (0UL),           /* 14 Reserved */
-#endif /* _SAM3XA_PIOD_INSTANCE_ */
-#ifdef _SAM3XA_PIOE_INSTANCE_
-	(void*) PIOE_Handler,    /* 15 Parallel IO Controller E */
-#else
-	(void*) (0UL),           /* 15 Reserved */
-#endif /* _SAM3XA_PIOE_INSTANCE_ */
-#ifdef _SAM3XA_PIOF_INSTANCE_
-	(void*) PIOF_Handler,    /* 16 Parallel IO Controller F */
-#else
-	(void*) (0UL),           /* 16 Reserved */
-#endif /* _SAM3XA_PIOF_INSTANCE_ */
-	(void*) USART0_Handler,  /* 17 USART 0 */
-	(void*) USART1_Handler,  /* 18 USART 1 */
-	(void*) USART2_Handler,  /* 19 USART 2 */
-#ifdef _SAM3XA_USART3_INSTANCE_
-	(void*) USART3_Handler,  /* 20 USART 3 */
-#else
-	(void*) (0UL),           /* 20 Reserved */
-#endif /* _SAM3XA_USART3_INSTANCE_ */
-	(void*) HSMCI_Handler,   /* 21 MCI */
-	(void*) TWI0_Handler,    /* 22 TWI 0 */
-	(void*) TWI1_Handler,    /* 23 TWI 1 */
-	(void*) SPI0_Handler,    /* 24 SPI 0 */
-#ifdef _SAM3XA_SPI1_INSTANCE_
-	(void*) SPI1_Handler,    /* 25 SPI 1 */
-#else
-	(void*) (0UL),           /* 25 Reserved */
-#endif /* _SAM3XA_SPI1_INSTANCE_ */
-	(void*) SSC_Handler,     /* 26 SSC */
-	(void*) TC0_Handler,     /* 27 Timer Counter 0 */
-	(void*) TC1_Handler,     /* 28 Timer Counter 1 */
-	(void*) TC2_Handler,     /* 29 Timer Counter 2 */
-	(void*) TC3_Handler,     /* 30 Timer Counter 3 */
-	(void*) TC4_Handler,     /* 31 Timer Counter 4 */
-	(void*) TC5_Handler,     /* 32 Timer Counter 5 */
-#ifdef _SAM3XA_TC2_INSTANCE_
-	(void*) TC6_Handler,     /* 33 Timer Counter 6 */
-	(void*) TC7_Handler,     /* 34 Timer Counter 7 */
-	(void*) TC8_Handler,     /* 35 Timer Counter 8 */
-#else
-	(void*) (0UL),           /* 33 Reserved */
-	(void*) (0UL),           /* 34 Reserved */
-	(void*) (0UL),           /* 35 Reserved */
-#endif /* _SAM3XA_TC2_INSTANCE_ */
-	(void*) PWM_Handler,     /* 36 PWM */
-	(void*) ADC_Handler,     /* 37 ADC controller */
-	(void*) DACC_Handler,    /* 38 DAC controller */
-	(void*) DMAC_Handler,    /* 39 DMA Controller */
-	(void*) UOTGHS_Handler,  /* 40 USB OTG High Speed */
-	(void*) TRNG_Handler,    /* 41 True Random Number Generator */
-#ifdef _SAM3XA_EMAC_INSTANCE_
-	(void*) EMAC_Handler,    /* 42 Ethernet MAC */
-#else
-	(void*) (0UL),           /* 42 Reserved */
-#endif /* _SAM3XA_EMAC_INSTANCE_ */
-	(void*) CAN0_Handler,    /* 43 CAN Controller 0 */
-	(void*) CAN1_Handler    /* 44 CAN Controller 1 */
-};
-
-/**
- * \brief This is the code that gets called on processor reset.
- * To initialize the device, and call the main() routine.
- */
-void Reset_Handler(void)
-{
-	uint32_t *pSrc, *pDest;
-
-	/* Initialize the relocate segment */
-	pSrc = &_etext;
-	pDest = &_srelocate;
-
-	if (pSrc != pDest) {
-		for (; pDest < &_erelocate;) {
-			*pDest++ = *pSrc++;
-		}
-	}
-
-	/* Clear the zero segment */
-	for (pDest = &_szero; pDest < &_ezero;) {
-		*pDest++ = 0;
-	}
-
-	/* Set the vector table base address */
-	pSrc = (uint32_t *) & _sfixed;
-	SCB->VTOR = ((uint32_t) pSrc & SCB_VTOR_TBLOFF_Msk);
-
-	if (((uint32_t) pSrc >= IRAM0_ADDR) && ((uint32_t) pSrc < NFC_RAM_ADDR)) {
-		SCB->VTOR |= (1UL) << SCB_VTOR_TBLBASE_Pos;
-	}
-
-	/* Initialize the C library */
-
-	// Arduino: we must setup hardware before doing this
-	//__libc_init_array();
-
-	/* Branch to main function */
-	main();
-
-	/* Infinite loop */
-	while (1);
-}
-
-/**
- * \brief Default interrupt handler for unused IRQs.
- */
-void Dummy_Handler(void)
-{
-	while (1) {
-	}
-}
-