lib: Add Atmel SAM3x8e ARM CMSIS files

Add the ARM CMSIS definitions (obtained from an Arduino copy of
libsam) in preparation for Arduino Due support.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

1 files changed, 96 insertions, 0 deletions

diff --git a/lib/cmsis-sam3x8e/include/instance/instance_usart1.h b/lib/cmsis-sam3x8e/include/instance/instance_usart1.h
new file mode 100644
index 00000000..daf475b6
--- /dev/null
+++ b/lib/cmsis-sam3x8e/include/instance/instance_usart1.h
@@ -0,0 +1,96 @@
+/* ----------------------------------------------------------------------------
+ *         SAM Software Package License
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2012, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following condition is met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+#ifndef _SAM3XA_USART1_INSTANCE_
+#define _SAM3XA_USART1_INSTANCE_
+
+/* ========== Register definition for USART1 peripheral ========== */
+#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+#define REG_USART1_CR          (0x4009C000U) /**< \brief (USART1) Control Register */
+#define REG_USART1_MR          (0x4009C004U) /**< \brief (USART1) Mode Register */
+#define REG_USART1_IER          (0x4009C008U) /**< \brief (USART1) Interrupt Enable Register */
+#define REG_USART1_IDR          (0x4009C00CU) /**< \brief (USART1) Interrupt Disable Register */
+#define REG_USART1_IMR          (0x4009C010U) /**< \brief (USART1) Interrupt Mask Register */
+#define REG_USART1_CSR          (0x4009C014U) /**< \brief (USART1) Channel Status Register */
+#define REG_USART1_RHR          (0x4009C018U) /**< \brief (USART1) Receiver Holding Register */
+#define REG_USART1_THR          (0x4009C01CU) /**< \brief (USART1) Transmitter Holding Register */
+#define REG_USART1_BRGR          (0x4009C020U) /**< \brief (USART1) Baud Rate Generator Register */
+#define REG_USART1_RTOR          (0x4009C024U) /**< \brief (USART1) Receiver Time-out Register */
+#define REG_USART1_TTGR          (0x4009C028U) /**< \brief (USART1) Transmitter Timeguard Register */
+#define REG_USART1_FIDI          (0x4009C040U) /**< \brief (USART1) FI DI Ratio Register */
+#define REG_USART1_NER          (0x4009C044U) /**< \brief (USART1) Number of Errors Register */
+#define REG_USART1_IF          (0x4009C04CU) /**< \brief (USART1) IrDA Filter Register */
+#define REG_USART1_MAN          (0x4009C050U) /**< \brief (USART1) Manchester Encoder Decoder Register */
+#define REG_USART1_LINMR          (0x4009C054U) /**< \brief (USART1) LIN Mode Register */
+#define REG_USART1_LINIR          (0x4009C058U) /**< \brief (USART1) LIN Identifier Register */
+#define REG_USART1_WPMR          (0x4009C0E4U) /**< \brief (USART1) Write Protect Mode Register */
+#define REG_USART1_WPSR          (0x4009C0E8U) /**< \brief (USART1) Write Protect Status Register */
+#define REG_USART1_RPR          (0x4009C100U) /**< \brief (USART1) Receive Pointer Register */
+#define REG_USART1_RCR          (0x4009C104U) /**< \brief (USART1) Receive Counter Register */
+#define REG_USART1_TPR          (0x4009C108U) /**< \brief (USART1) Transmit Pointer Register */
+#define REG_USART1_TCR          (0x4009C10CU) /**< \brief (USART1) Transmit Counter Register */
+#define REG_USART1_RNPR          (0x4009C110U) /**< \brief (USART1) Receive Next Pointer Register */
+#define REG_USART1_RNCR          (0x4009C114U) /**< \brief (USART1) Receive Next Counter Register */
+#define REG_USART1_TNPR          (0x4009C118U) /**< \brief (USART1) Transmit Next Pointer Register */
+#define REG_USART1_TNCR          (0x4009C11CU) /**< \brief (USART1) Transmit Next Counter Register */
+#define REG_USART1_PTCR          (0x4009C120U) /**< \brief (USART1) Transfer Control Register */
+#define REG_USART1_PTSR          (0x4009C124U) /**< \brief (USART1) Transfer Status Register */
+#else
+#define REG_USART1_CR (*(WoReg*)0x4009C000U) /**< \brief (USART1) Control Register */
+#define REG_USART1_MR (*(RwReg*)0x4009C004U) /**< \brief (USART1) Mode Register */
+#define REG_USART1_IER (*(WoReg*)0x4009C008U) /**< \brief (USART1) Interrupt Enable Register */
+#define REG_USART1_IDR (*(WoReg*)0x4009C00CU) /**< \brief (USART1) Interrupt Disable Register */
+#define REG_USART1_IMR (*(RoReg*)0x4009C010U) /**< \brief (USART1) Interrupt Mask Register */
+#define REG_USART1_CSR (*(RoReg*)0x4009C014U) /**< \brief (USART1) Channel Status Register */
+#define REG_USART1_RHR (*(RoReg*)0x4009C018U) /**< \brief (USART1) Receiver Holding Register */
+#define REG_USART1_THR (*(WoReg*)0x4009C01CU) /**< \brief (USART1) Transmitter Holding Register */
+#define REG_USART1_BRGR (*(RwReg*)0x4009C020U) /**< \brief (USART1) Baud Rate Generator Register */
+#define REG_USART1_RTOR (*(RwReg*)0x4009C024U) /**< \brief (USART1) Receiver Time-out Register */
+#define REG_USART1_TTGR (*(RwReg*)0x4009C028U) /**< \brief (USART1) Transmitter Timeguard Register */
+#define REG_USART1_FIDI (*(RwReg*)0x4009C040U) /**< \brief (USART1) FI DI Ratio Register */
+#define REG_USART1_NER (*(RoReg*)0x4009C044U) /**< \brief (USART1) Number of Errors Register */
+#define REG_USART1_IF (*(RwReg*)0x4009C04CU) /**< \brief (USART1) IrDA Filter Register */
+#define REG_USART1_MAN (*(RwReg*)0x4009C050U) /**< \brief (USART1) Manchester Encoder Decoder Register */
+#define REG_USART1_LINMR (*(RwReg*)0x4009C054U) /**< \brief (USART1) LIN Mode Register */
+#define REG_USART1_LINIR (*(RwReg*)0x4009C058U) /**< \brief (USART1) LIN Identifier Register */
+#define REG_USART1_WPMR (*(RwReg*)0x4009C0E4U) /**< \brief (USART1) Write Protect Mode Register */
+#define REG_USART1_WPSR (*(RoReg*)0x4009C0E8U) /**< \brief (USART1) Write Protect Status Register */
+#define REG_USART1_RPR (*(RwReg*)0x4009C100U) /**< \brief (USART1) Receive Pointer Register */
+#define REG_USART1_RCR (*(RwReg*)0x4009C104U) /**< \brief (USART1) Receive Counter Register */
+#define REG_USART1_TPR (*(RwReg*)0x4009C108U) /**< \brief (USART1) Transmit Pointer Register */
+#define REG_USART1_TCR (*(RwReg*)0x4009C10CU) /**< \brief (USART1) Transmit Counter Register */
+#define REG_USART1_RNPR (*(RwReg*)0x4009C110U) /**< \brief (USART1) Receive Next Pointer Register */
+#define REG_USART1_RNCR (*(RwReg*)0x4009C114U) /**< \brief (USART1) Receive Next Counter Register */
+#define REG_USART1_TNPR (*(RwReg*)0x4009C118U) /**< \brief (USART1) Transmit Next Pointer Register */
+#define REG_USART1_TNCR (*(RwReg*)0x4009C11CU) /**< \brief (USART1) Transmit Next Counter Register */
+#define REG_USART1_PTCR (*(WoReg*)0x4009C120U) /**< \brief (USART1) Transfer Control Register */
+#define REG_USART1_PTSR (*(RoReg*)0x4009C124U) /**< \brief (USART1) Transfer Status Register */
+#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#endif /* _SAM3XA_USART1_INSTANCE_ */