lib: Add Atmel SAM3x8e ARM CMSIS files

Add the ARM CMSIS definitions (obtained from an Arduino copy of
libsam) in preparation for Arduino Due support.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

1 files changed, 124 insertions, 0 deletions

diff --git a/lib/cmsis-sam3x8e/include/instance/instance_piof.h b/lib/cmsis-sam3x8e/include/instance/instance_piof.h
new file mode 100644
index 00000000..3e526773
--- /dev/null
+++ b/lib/cmsis-sam3x8e/include/instance/instance_piof.h
@@ -0,0 +1,124 @@
+/* ----------------------------------------------------------------------------
+ *         SAM Software Package License
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2012, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following condition is met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+#ifndef _SAM3XA_PIOF_INSTANCE_
+#define _SAM3XA_PIOF_INSTANCE_
+
+/* ========== Register definition for PIOF peripheral ========== */
+#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+#define REG_PIOF_PER             (0x400E1800U) /**< \brief (PIOF) PIO Enable Register */
+#define REG_PIOF_PDR             (0x400E1804U) /**< \brief (PIOF) PIO Disable Register */
+#define REG_PIOF_PSR             (0x400E1808U) /**< \brief (PIOF) PIO Status Register */
+#define REG_PIOF_OER             (0x400E1810U) /**< \brief (PIOF) Output Enable Register */
+#define REG_PIOF_ODR             (0x400E1814U) /**< \brief (PIOF) Output Disable Register */
+#define REG_PIOF_OSR             (0x400E1818U) /**< \brief (PIOF) Output Status Register */
+#define REG_PIOF_IFER            (0x400E1820U) /**< \brief (PIOF) Glitch Input Filter Enable Register */
+#define REG_PIOF_IFDR            (0x400E1824U) /**< \brief (PIOF) Glitch Input Filter Disable Register */
+#define REG_PIOF_IFSR            (0x400E1828U) /**< \brief (PIOF) Glitch Input Filter Status Register */
+#define REG_PIOF_SODR            (0x400E1830U) /**< \brief (PIOF) Set Output Data Register */
+#define REG_PIOF_CODR            (0x400E1834U) /**< \brief (PIOF) Clear Output Data Register */
+#define REG_PIOF_ODSR            (0x400E1838U) /**< \brief (PIOF) Output Data Status Register */
+#define REG_PIOF_PDSR            (0x400E183CU) /**< \brief (PIOF) Pin Data Status Register */
+#define REG_PIOF_IER             (0x400E1840U) /**< \brief (PIOF) Interrupt Enable Register */
+#define REG_PIOF_IDR             (0x400E1844U) /**< \brief (PIOF) Interrupt Disable Register */
+#define REG_PIOF_IMR             (0x400E1848U) /**< \brief (PIOF) Interrupt Mask Register */
+#define REG_PIOF_ISR             (0x400E184CU) /**< \brief (PIOF) Interrupt Status Register */
+#define REG_PIOF_MDER            (0x400E1850U) /**< \brief (PIOF) Multi-driver Enable Register */
+#define REG_PIOF_MDDR            (0x400E1854U) /**< \brief (PIOF) Multi-driver Disable Register */
+#define REG_PIOF_MDSR            (0x400E1858U) /**< \brief (PIOF) Multi-driver Status Register */
+#define REG_PIOF_PUDR            (0x400E1860U) /**< \brief (PIOF) Pull-up Disable Register */
+#define REG_PIOF_PUER            (0x400E1864U) /**< \brief (PIOF) Pull-up Enable Register */
+#define REG_PIOF_PUSR            (0x400E1868U) /**< \brief (PIOF) Pad Pull-up Status Register */
+#define REG_PIOF_ABSR            (0x400E1870U) /**< \brief (PIOF) Peripheral AB Select Register */
+#define REG_PIOF_SCIFSR          (0x400E1880U) /**< \brief (PIOF) System Clock Glitch Input Filter Select Register */
+#define REG_PIOF_DIFSR           (0x400E1884U) /**< \brief (PIOF) Debouncing Input Filter Select Register */
+#define REG_PIOF_IFDGSR          (0x400E1888U) /**< \brief (PIOF) Glitch or Debouncing Input Filter Clock Selection Status Register */
+#define REG_PIOF_SCDR            (0x400E188CU) /**< \brief (PIOF) Slow Clock Divider Debouncing Register */
+#define REG_PIOF_OWER            (0x400E18A0U) /**< \brief (PIOF) Output Write Enable */
+#define REG_PIOF_OWDR            (0x400E18A4U) /**< \brief (PIOF) Output Write Disable */
+#define REG_PIOF_OWSR            (0x400E18A8U) /**< \brief (PIOF) Output Write Status Register */
+#define REG_PIOF_AIMER           (0x400E18B0U) /**< \brief (PIOF) Additional Interrupt Modes Enable Register */
+#define REG_PIOF_AIMDR           (0x400E18B4U) /**< \brief (PIOF) Additional Interrupt Modes Disables Register */
+#define REG_PIOF_AIMMR           (0x400E18B8U) /**< \brief (PIOF) Additional Interrupt Modes Mask Register */
+#define REG_PIOF_ESR             (0x400E18C0U) /**< \brief (PIOF) Edge Select Register */
+#define REG_PIOF_LSR             (0x400E18C4U) /**< \brief (PIOF) Level Select Register */
+#define REG_PIOF_ELSR            (0x400E18C8U) /**< \brief (PIOF) Edge/Level Status Register */
+#define REG_PIOF_FELLSR          (0x400E18D0U) /**< \brief (PIOF) Falling Edge/Low Level Select Register */
+#define REG_PIOF_REHLSR          (0x400E18D4U) /**< \brief (PIOF) Rising Edge/ High Level Select Register */
+#define REG_PIOF_FRLHSR          (0x400E18D8U) /**< \brief (PIOF) Fall/Rise - Low/High Status Register */
+#define REG_PIOF_LOCKSR          (0x400E18E0U) /**< \brief (PIOF) Lock Status */
+#define REG_PIOF_WPMR            (0x400E18E4U) /**< \brief (PIOF) Write Protect Mode Register */
+#define REG_PIOF_WPSR            (0x400E18E8U) /**< \brief (PIOF) Write Protect Status Register */
+#else
+#define REG_PIOF_PER    (*(WoReg*)0x400E1800U) /**< \brief (PIOF) PIO Enable Register */
+#define REG_PIOF_PDR    (*(WoReg*)0x400E1804U) /**< \brief (PIOF) PIO Disable Register */
+#define REG_PIOF_PSR    (*(RoReg*)0x400E1808U) /**< \brief (PIOF) PIO Status Register */
+#define REG_PIOF_OER    (*(WoReg*)0x400E1810U) /**< \brief (PIOF) Output Enable Register */
+#define REG_PIOF_ODR    (*(WoReg*)0x400E1814U) /**< \brief (PIOF) Output Disable Register */
+#define REG_PIOF_OSR    (*(RoReg*)0x400E1818U) /**< \brief (PIOF) Output Status Register */
+#define REG_PIOF_IFER   (*(WoReg*)0x400E1820U) /**< \brief (PIOF) Glitch Input Filter Enable Register */
+#define REG_PIOF_IFDR   (*(WoReg*)0x400E1824U) /**< \brief (PIOF) Glitch Input Filter Disable Register */
+#define REG_PIOF_IFSR   (*(RoReg*)0x400E1828U) /**< \brief (PIOF) Glitch Input Filter Status Register */
+#define REG_PIOF_SODR   (*(WoReg*)0x400E1830U) /**< \brief (PIOF) Set Output Data Register */
+#define REG_PIOF_CODR   (*(WoReg*)0x400E1834U) /**< \brief (PIOF) Clear Output Data Register */
+#define REG_PIOF_ODSR   (*(RwReg*)0x400E1838U) /**< \brief (PIOF) Output Data Status Register */
+#define REG_PIOF_PDSR   (*(RoReg*)0x400E183CU) /**< \brief (PIOF) Pin Data Status Register */
+#define REG_PIOF_IER    (*(WoReg*)0x400E1840U) /**< \brief (PIOF) Interrupt Enable Register */
+#define REG_PIOF_IDR    (*(WoReg*)0x400E1844U) /**< \brief (PIOF) Interrupt Disable Register */
+#define REG_PIOF_IMR    (*(RoReg*)0x400E1848U) /**< \brief (PIOF) Interrupt Mask Register */
+#define REG_PIOF_ISR    (*(RoReg*)0x400E184CU) /**< \brief (PIOF) Interrupt Status Register */
+#define REG_PIOF_MDER   (*(WoReg*)0x400E1850U) /**< \brief (PIOF) Multi-driver Enable Register */
+#define REG_PIOF_MDDR   (*(WoReg*)0x400E1854U) /**< \brief (PIOF) Multi-driver Disable Register */
+#define REG_PIOF_MDSR   (*(RoReg*)0x400E1858U) /**< \brief (PIOF) Multi-driver Status Register */
+#define REG_PIOF_PUDR   (*(WoReg*)0x400E1860U) /**< \brief (PIOF) Pull-up Disable Register */
+#define REG_PIOF_PUER   (*(WoReg*)0x400E1864U) /**< \brief (PIOF) Pull-up Enable Register */
+#define REG_PIOF_PUSR   (*(RoReg*)0x400E1868U) /**< \brief (PIOF) Pad Pull-up Status Register */
+#define REG_PIOF_ABSR   (*(RwReg*)0x400E1870U) /**< \brief (PIOF) Peripheral AB Select Register */
+#define REG_PIOF_SCIFSR (*(WoReg*)0x400E1880U) /**< \brief (PIOF) System Clock Glitch Input Filter Select Register */
+#define REG_PIOF_DIFSR  (*(WoReg*)0x400E1884U) /**< \brief (PIOF) Debouncing Input Filter Select Register */
+#define REG_PIOF_IFDGSR (*(RoReg*)0x400E1888U) /**< \brief (PIOF) Glitch or Debouncing Input Filter Clock Selection Status Register */
+#define REG_PIOF_SCDR   (*(RwReg*)0x400E188CU) /**< \brief (PIOF) Slow Clock Divider Debouncing Register */
+#define REG_PIOF_OWER   (*(WoReg*)0x400E18A0U) /**< \brief (PIOF) Output Write Enable */
+#define REG_PIOF_OWDR   (*(WoReg*)0x400E18A4U) /**< \brief (PIOF) Output Write Disable */
+#define REG_PIOF_OWSR   (*(RoReg*)0x400E18A8U) /**< \brief (PIOF) Output Write Status Register */
+#define REG_PIOF_AIMER  (*(WoReg*)0x400E18B0U) /**< \brief (PIOF) Additional Interrupt Modes Enable Register */
+#define REG_PIOF_AIMDR  (*(WoReg*)0x400E18B4U) /**< \brief (PIOF) Additional Interrupt Modes Disables Register */
+#define REG_PIOF_AIMMR  (*(RoReg*)0x400E18B8U) /**< \brief (PIOF) Additional Interrupt Modes Mask Register */
+#define REG_PIOF_ESR    (*(WoReg*)0x400E18C0U) /**< \brief (PIOF) Edge Select Register */
+#define REG_PIOF_LSR    (*(WoReg*)0x400E18C4U) /**< \brief (PIOF) Level Select Register */
+#define REG_PIOF_ELSR   (*(RoReg*)0x400E18C8U) /**< \brief (PIOF) Edge/Level Status Register */
+#define REG_PIOF_FELLSR (*(WoReg*)0x400E18D0U) /**< \brief (PIOF) Falling Edge/Low Level Select Register */
+#define REG_PIOF_REHLSR (*(WoReg*)0x400E18D4U) /**< \brief (PIOF) Rising Edge/ High Level Select Register */
+#define REG_PIOF_FRLHSR (*(RoReg*)0x400E18D8U) /**< \brief (PIOF) Fall/Rise - Low/High Status Register */
+#define REG_PIOF_LOCKSR (*(RoReg*)0x400E18E0U) /**< \brief (PIOF) Lock Status */
+#define REG_PIOF_WPMR   (*(RwReg*)0x400E18E4U) /**< \brief (PIOF) Write Protect Mode Register */
+#define REG_PIOF_WPSR   (*(RoReg*)0x400E18E8U) /**< \brief (PIOF) Write Protect Status Register */
+#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#endif /* _SAM3XA_PIOF_INSTANCE_ */