klippy: Avoid using '%' syntax when calling logging module

The logging module can build strings directly from printf syntax - no
need to build the string first.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

8 files changed, 32 insertions, 32 deletions

diff --git a/klippy/chelper.py b/klippy/chelper.py
index 1f09e72d..7d950ab8 100644
--- a/klippy/chelper.py
+++ b/klippy/chelper.py
@@ -90,7 +90,7 @@ def check_build_code(srcdir, target, sources, cmd, other_files=[]):
     src_times = get_mtimes(srcdir, sources + other_files)
     obj_times = get_mtimes(srcdir, [target])
     if not obj_times or max(src_times) > min(obj_times):
-        logging.info("Building C code module %s" % (target,))
+        logging.info("Building C code module %s", target)
         srcfiles = [os.path.join(srcdir, fname) for fname in sources]
         destlib = os.path.join(srcdir, target)
         os.system(cmd % (destlib, ' '.join(srcfiles)))
diff --git a/klippy/heater.py b/klippy/heater.py
index 9dd48b19..7acd38b1 100644
--- a/klippy/heater.py
+++ b/klippy/heater.py
@@ -148,9 +148,9 @@ class PrinterHeater:
         pwm_time = read_time + REPORT_TIME + SAMPLE_TIME*SAMPLE_COUNT
         self.next_pwm_time = pwm_time + 0.75 * MAX_HEAT_TIME
         self.last_pwm_value = value
-        logging.debug("%s: pwm=%.3f@%.3f (from %.3f@%.3f [%.3f])" % (
-            self.name, value, pwm_time,
-            self.last_temp, self.last_temp_time, self.target_temp))
+        logging.debug("%s: pwm=%.3f@%.3f (from %.3f@%.3f [%.3f])",
+                      self.name, value, pwm_time,
+                      self.last_temp, self.last_temp_time, self.target_temp)
         self.mcu_pwm.set_pwm(pwm_time, value)
     def adc_callback(self, read_time, read_value):
         temp = self.sensor.calc_temp(read_value)
@@ -159,7 +159,7 @@ class PrinterHeater:
             self.last_temp_time = read_time
             self.can_extrude = (temp >= self.min_extrude_temp)
             self.control.adc_callback(read_time, temp)
-        #logging.debug("temp: %.3f %f = %f" % (read_time, read_value, temp))
+        #logging.debug("temp: %.3f %f = %f", read_time, read_value, temp)
     # External commands
     def set_temp(self, print_time, degrees):
         if degrees and (degrees < self.min_temp or degrees > self.max_temp):
@@ -239,8 +239,8 @@ class ControlPID:
         temp_integ = max(0., min(self.temp_integ_max, temp_integ))
         # Calculate output
         co = self.Kp*temp_err + self.Ki*temp_integ - self.Kd*temp_deriv
-        #logging.debug("pid: %f@%.3f -> diff=%f deriv=%f err=%f integ=%f co=%d" % (
-        #    temp, read_time, temp_diff, temp_deriv, temp_err, temp_integ, co))
+        #logging.debug("pid: %f@%.3f -> diff=%f deriv=%f err=%f integ=%f co=%d",
+        #    temp, read_time, temp_diff, temp_deriv, temp_err, temp_integ, co)
         bounded_co = max(0., min(self.heater.max_power, co))
         self.heater.set_pwm(read_time, bounded_co)
         # Store state for next measurement
@@ -305,9 +305,9 @@ class ControlAutoTune:
         Td = 0.125 * Tu
         Ki = Kp / Ti
         Kd = Kp * Td
-        logging.info("Autotune: raw=%f/%f Ku=%f Tu=%f  Kp=%f Ki=%f Kd=%f" % (
-            temp_diff, max_power, Ku, Tu,
-            Kp * PID_PARAM_BASE, Ki * PID_PARAM_BASE, Kd * PID_PARAM_BASE))
+        logging.info("Autotune: raw=%f/%f Ku=%f Tu=%f  Kp=%f Ki=%f Kd=%f",
+                     temp_diff, max_power, Ku, Tu, Kp * PID_PARAM_BASE,
+                     Ki * PID_PARAM_BASE, Kd * PID_PARAM_BASE)
     def check_busy(self, eventtime):
         if self.heating or len(self.peaks) < 12:
             return True
diff --git a/klippy/klippy.py b/klippy/klippy.py
index a40d6da7..ff3b2280 100644
--- a/klippy/klippy.py
+++ b/klippy/klippy.py
@@ -159,7 +159,7 @@ class Printer:
         out.append(toolhead.stats(eventtime))
         for m in self.mcus:
             out.append(m.stats(eventtime))
-        logging.info("Stats %.1f: %s" % (eventtime, ' '.join(out)))
+        logging.info("Stats %.1f: %s", eventtime, ' '.join(out))
         return eventtime + 1.
     def add_object(self, name, obj):
         self.objects[name] = obj
@@ -217,8 +217,8 @@ class Printer:
     def run(self):
         systime = time.time()
         monotime = self.reactor.monotonic()
-        logging.info("Start printer at %s (%.1f %.1f)" % (
-            time.asctime(time.localtime(systime)), systime, monotime))
+        logging.info("Start printer at %s (%.1f %.1f)",
+                     time.asctime(time.localtime(systime)), systime, monotime)
         # Enter main reactor loop
         try:
             self.reactor.run()
diff --git a/klippy/msgproto.py b/klippy/msgproto.py
index 135ff358..40138346 100644
--- a/klippy/msgproto.py
+++ b/klippy/msgproto.py
@@ -208,7 +208,7 @@ class MessageParser:
         msgcrc = s[msglen-MESSAGE_TRAILER_CRC:msglen-MESSAGE_TRAILER_CRC+2]
         crc = crc16_ccitt(s[:msglen-MESSAGE_TRAILER_SIZE])
         if crc != msgcrc:
-            #logging.debug("got crc %s vs %s" % (repr(crc), repr(msgcrc)))
+            #logging.debug("got crc %s vs %s", repr(crc), repr(msgcrc))
             return -1
         return msglen
     def dump(self, s):
diff --git a/klippy/serialhdl.py b/klippy/serialhdl.py
index 411c77b1..8d6d6a7f 100644
--- a/klippy/serialhdl.py
+++ b/klippy/serialhdl.py
@@ -63,7 +63,7 @@ class SerialReader:
                 else:
                     self.ser = open(self.serialport, 'rb+')
             except (OSError, IOError, serial.SerialException) as e:
-                logging.warn("Unable to open port: %s" % (e,))
+                logging.warn("Unable to open port: %s", e)
                 self.reactor.pause(starttime + 5.)
                 continue
             if self.baud:
@@ -84,10 +84,10 @@ class SerialReader:
         msgparser.process_identify(identify_data)
         self.msgparser = msgparser
         self.register_callback(self.handle_unknown, '#unknown')
-        logging.info("Loaded %d commands (%s)" % (
-            len(msgparser.messages_by_id), msgparser.version))
-        logging.info("MCU config: %s" % (" ".join(
-            ["%s=%s" % (k, v) for k, v in msgparser.config.items()])))
+        logging.info("Loaded %d commands (%s)",
+                     len(msgparser.messages_by_id), msgparser.version)
+        logging.info("MCU config: %s", " ".join(
+            ["%s=%s" % (k, v) for k, v in msgparser.config.items()]))
         # Setup baud adjust
         mcu_baud = float(msgparser.config.get('SERIAL_BAUD', 0.))
         if mcu_baud:
@@ -165,12 +165,12 @@ class SerialReader:
         return '\n'.join(out)
     # Default message handlers
     def handle_unknown(self, params):
-        logging.warn("Unknown message type %d: %s" % (
-            params['#msgid'], repr(params['#msg'])))
+        logging.warn("Unknown message type %d: %s",
+                     params['#msgid'], repr(params['#msg']))
     def handle_output(self, params):
-        logging.info("%s: %s" % (params['#name'], params['#msg']))
+        logging.info("%s: %s", params['#name'], params['#msg'])
     def handle_default(self, params):
-        logging.warn("got %s" % (params,))
+        logging.warn("got %s", params)
     def __del__(self):
         self.disconnect()
 
@@ -249,8 +249,8 @@ class SerialBootStrap:
         self.serial.send(imsg)
         return eventtime + self.RETRY_TIME
     def handle_unknown(self, params):
-        logging.debug("Unknown message %d (len %d) while identifying" % (
-            params['#msgid'], len(params['#msg'])))
+        logging.debug("Unknown message %d (len %d) while identifying",
+                      params['#msgid'], len(params['#msg']))
 
 # Attempt to place an AVR stk500v2 style programmer into normal mode
 def stk500v2_leave(ser, reactor):
@@ -267,7 +267,7 @@ def stk500v2_leave(ser, reactor):
     ser.write('\x1b\x01\x00\x01\x0e\x11\x04')
     reactor.pause(reactor.monotonic() + 0.050)
     res = ser.read(4096)
-    logging.debug("Got %s from stk500v2" % (repr(res),))
+    logging.debug("Got %s from stk500v2", repr(res))
     ser.baudrate = origbaud
 
 # Attempt an arduino style reset on a serial port
diff --git a/klippy/stepper.py b/klippy/stepper.py
index 8ccec18f..ab1af2ba 100644
--- a/klippy/stepper.py
+++ b/klippy/stepper.py
@@ -91,7 +91,7 @@ class PrinterHomingStepper(PrinterStepper):
                     endstop_accuracy * self.inv_step_dist))
             if self.homing_endstop_accuracy >= self.homing_stepper_phases // 2:
                 logging.info("Endstop for %s is not accurate enough for stepper"
-                             " phase adjustment" % (name,))
+                             " phase adjustment", name)
                 self.homing_stepper_phases = None
             if self.mcu_endstop.get_mcu().is_fileoutput():
                 self.homing_endstop_accuracy = self.homing_stepper_phases
@@ -108,7 +108,7 @@ class PrinterHomingStepper(PrinterStepper):
         pos = self.mcu_stepper.get_mcu_position()
         pos %= self.homing_stepper_phases
         if self.homing_endstop_phase is None:
-            logging.info("Setting %s endstop phase to %d" % (self.name, pos))
+            logging.info("Setting %s endstop phase to %d", self.name, pos)
             self.homing_endstop_phase = pos
             return 0
         delta = (pos - self.homing_endstop_phase) % self.homing_stepper_phases
diff --git a/klippy/toolhead.py b/klippy/toolhead.py
index 7a1b3e52..33814674 100644
--- a/klippy/toolhead.py
+++ b/klippy/toolhead.py
@@ -339,7 +339,7 @@ class ToolHead:
         self.extruder.motor_off(last_move_time)
         self.dwell(STALL_TIME)
         self.need_motor_off = False
-        logging.debug('; Max time of %f' % (last_move_time,))
+        logging.debug('; Max time of %f', last_move_time)
     def wait_moves(self):
         self._flush_lookahead()
         if self.mcu.is_fileoutput():
diff --git a/klippy/util.py b/klippy/util.py
index 6c9cad6b..4a528439 100644
--- a/klippy/util.py
+++ b/klippy/util.py
@@ -43,8 +43,8 @@ def get_cpu_info():
         data = f.read()
         f.close()
     except OSError:
-        logging.debug("Exception on read /proc/cpuinfo: %s" % (
-            traceback.format_exc(),))
+        logging.debug("Exception on read /proc/cpuinfo: %s",
+                      traceback.format_exc())
         return "?"
     lines = [l.split(':', 1) for l in data.split('\n')]
     lines = [(l[0].strip(), l[1].strip()) for l in lines if len(l) == 2]
@@ -64,6 +64,6 @@ def get_git_version():
         output = process.communicate()[0]
         retcode = process.poll()
     except OSError:
-        logging.debug("Exception on run: %s" % (traceback.format_exc(),))
+        logging.debug("Exception on run: %s", traceback.format_exc())
         return "?"
     return output.strip()