diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2018-07-24 15:45:51 -0400 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2018-07-24 15:47:17 -0400 |
| commit | 5b124d59f2213720288561b38441d0fc7d41b57f (patch) | |
| tree | c4024c03cd6eb7e4747c75ae67d2b1569c1a8ec4 /klippy | |
| parent | 70f765f62f328c426efcdb7808b7bc6c3375eb1b (diff) | |
| download | kutter-5b124d59f2213720288561b38441d0fc7d41b57f.tar.gz kutter-5b124d59f2213720288561b38441d0fc7d41b57f.tar.xz kutter-5b124d59f2213720288561b38441d0fc7d41b57f.zip | |
spi_temperature: Remove spi_mode parameter
All of the Maxim chips can use SPI mode 1, so no need to configure it.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'klippy')
| -rw-r--r-- | klippy/extras/spi_temperature.py | 6 |
1 files changed, 2 insertions, 4 deletions
diff --git a/klippy/extras/spi_temperature.py b/klippy/extras/spi_temperature.py index f7c15fda..b5dd23e9 100644 --- a/klippy/extras/spi_temperature.py +++ b/klippy/extras/spi_temperature.py @@ -32,12 +32,10 @@ class SensorBase: pin = pin_params['pin'] # SPI bus configuration spi_oid = mcu.create_oid() - spi_mode = config.getint('spi_mode', minval=0, maxval=3) spi_speed = config.getint('spi_speed', minval=0) mcu.add_config_cmd( - "config_spi oid=%u bus=%u pin=%s" - " mode=%u rate=%u shutdown_msg=" % ( - spi_oid, 0, pin, spi_mode, spi_speed)) + "config_spi oid=%u bus=0 pin=%s mode=1 rate=%u shutdown_msg=" % ( + spi_oid, pin, spi_speed)) if config_cmd is not None: config_cmd = "".join("%02x" % b for b in config_cmd) mcu.add_config_cmd("spi_send oid=%u data=%s" % ( |