diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2018-03-11 13:22:45 -0400 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2018-03-11 13:29:28 -0400 |
| commit | 57d342b4554f7155e81afdba389e0a192d8f5d8e (patch) | |
| tree | 86bc697e60e7843c9d9ddcc2a7d008eb0cab0a8d /klippy | |
| parent | 5208fc38edc7e62958bfc51de7918351b888b408 (diff) | |
| download | kutter-57d342b4554f7155e81afdba389e0a192d8f5d8e.tar.gz kutter-57d342b4554f7155e81afdba389e0a192d8f5d8e.tar.xz kutter-57d342b4554f7155e81afdba389e0a192d8f5d8e.zip | |
verify_heater: Change default hysteresis to 10 degrees
A default of 4 degrees and 10 seconds may be too aggressive - change
the default to 10 degrees and 15 seconds.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'klippy')
| -rw-r--r-- | klippy/extras/verify_heater.py | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/klippy/extras/verify_heater.py b/klippy/extras/verify_heater.py index f7b750eb..4a30c241 100644 --- a/klippy/extras/verify_heater.py +++ b/klippy/extras/verify_heater.py @@ -11,8 +11,8 @@ class HeaterCheck: self.printer = config.get_printer() self.heater_name = config.get_name().split()[1] self.heater = None - self.hysteresis = config.getfloat('hysteresis', 4., above=0.) - self.check_time = config.getfloat('check_time', 10., minval=1.) + self.hysteresis = config.getfloat('hysteresis', 10., above=0.) + self.check_time = config.getfloat('check_time', 15., minval=1.) self.heating_gain = config.getfloat('heating_gain', 2., above=0.) default_gain_time = 20. if self.heater_name == 'heater_bed': |