diff options
| author | Alec B. Plumb <alec@etherwalker.com> | 2019-01-02 14:45:35 -0800 |
|---|---|---|
| committer | KevinOConnor <kevin@koconnor.net> | 2019-01-02 17:45:35 -0500 |
| commit | 59e9b6562fb39c1e4860971e818e94a455622547 (patch) | |
| tree | c257eaab9c71f3c13b9d3e6590f3ae43e68d1ea7 /klippy/mathutil.py | |
| parent | f6c9150349d3ffb364a990132a16afa64c890b2e (diff) | |
| download | kutter-59e9b6562fb39c1e4860971e818e94a455622547.tar.gz kutter-59e9b6562fb39c1e4860971e818e94a455622547.tar.xz kutter-59e9b6562fb39c1e4860971e818e94a455622547.zip | |
respond: An extra for sending messages to the printer host. (#1053)
I have made one change to `gcode.py` to support quoted parameter
values.
I have added support for the basic `M118` command (see
https://reprap.org/wiki/G-code#M118:_Echo_message_on_host). I have
also added a `RESPOND` command that takes extended parameters.
`ECHO` might be a better name than `RESPOND` but is already defined
in `gcode.py`.
Signed-off-by: Alec B. Plumb <alec@etherwalker.com>
Diffstat (limited to 'klippy/mathutil.py')
0 files changed, 0 insertions, 0 deletions