diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2019-02-27 13:09:24 -0500 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2019-02-27 13:09:24 -0500 |
| commit | b934313c3da7bd57d2f6bb665dc5a9039ccfb076 (patch) | |
| tree | d12f9b62d6ebde5fb8debf53be8befb5dc431f4a /klippy/heater.py | |
| parent | d7e8264d92b583555cad7888bf44a0c6e59f5a4c (diff) | |
| download | kutter-b934313c3da7bd57d2f6bb665dc5a9039ccfb076.tar.gz kutter-b934313c3da7bd57d2f6bb665dc5a9039ccfb076.tar.xz kutter-b934313c3da7bd57d2f6bb665dc5a9039ccfb076.zip | |
heater: Wrap code to 80 columns
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'klippy/heater.py')
| -rw-r--r-- | klippy/heater.py | 13 |
1 files changed, 8 insertions, 5 deletions
diff --git a/klippy/heater.py b/klippy/heater.py index 5810afae..01c1b500 100644 --- a/klippy/heater.py +++ b/klippy/heater.py @@ -33,8 +33,10 @@ class Heater: self.pwm_delay = self.sensor.get_report_time_delta() # Setup temperature checks self.min_extrude_temp = config.getfloat( - 'min_extrude_temp', 170., minval=self.min_temp, maxval=self.max_temp) - is_fileoutput = self.printer.get_start_args().get('debugoutput') is not None + 'min_extrude_temp', 170., + minval=self.min_temp, maxval=self.max_temp) + is_fileoutput = (self.printer.get_start_args().get('debugoutput') + is not None) self.can_extrude = self.min_extrude_temp <= 0. or is_fileoutput self.max_power = config.getfloat('max_power', 1., above=0., maxval=1.) self.smooth_time = config.getfloat('smooth_time', 2., above=0.) @@ -63,9 +65,10 @@ class Heater: # Load additional modules self.printer.try_load_module(config, "verify_heater %s" % (self.name,)) self.printer.try_load_module(config, "pid_calibrate") - self.gcode.register_mux_command("SET_HEATER_TEMPERATURE", "HEATER", self.name, - self.cmd_SET_HEATER_TEMPERATURE, - desc=self.cmd_SET_HEATER_TEMPERATURE_help) + self.gcode.register_mux_command( + "SET_HEATER_TEMPERATURE", "HEATER", self.name, + self.cmd_SET_HEATER_TEMPERATURE, + desc=self.cmd_SET_HEATER_TEMPERATURE_help) def set_pwm(self, read_time, value): if self.target_temp <= 0.: value = 0. |