diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2021-09-01 12:54:25 -0400 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2021-09-03 18:11:05 -0400 |
| commit | c84956befe88daeeb9512acaa9fa82395665df16 (patch) | |
| tree | 517a34f0f9abbcfc1d1b78ac8833f85aa4265c98 /klippy/extras | |
| parent | af3622544d8adc6ce92dd47d1f1087b970ad8b6e (diff) | |
| download | kutter-c84956befe88daeeb9512acaa9fa82395665df16.tar.gz kutter-c84956befe88daeeb9512acaa9fa82395665df16.tar.xz kutter-c84956befe88daeeb9512acaa9fa82395665df16.zip | |
heaters: Change default smooth_time from 2 seconds to 1 second
A larger smooth_time results in a slower reaction time for the PID.
This increased delay can cause temperature oscillations with high
power heaters. Many boards produce good results without any
smoothing. So, it seems a smooth_time of 1 second is a better
default.
Reported by @ReXT3D.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'klippy/extras')
| -rw-r--r-- | klippy/extras/heaters.py | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/klippy/extras/heaters.py b/klippy/extras/heaters.py index e63881dc..b9f60e63 100644 --- a/klippy/extras/heaters.py +++ b/klippy/extras/heaters.py @@ -34,7 +34,7 @@ class Heater: is not None) self.can_extrude = self.min_extrude_temp <= 0. or is_fileoutput self.max_power = config.getfloat('max_power', 1., above=0., maxval=1.) - self.smooth_time = config.getfloat('smooth_time', 2., above=0.) + self.smooth_time = config.getfloat('smooth_time', 1., above=0.) self.inv_smooth_time = 1. / self.smooth_time self.lock = threading.Lock() self.last_temp = self.smoothed_temp = self.target_temp = 0. |