diff options
| author | Sami Haahtinen <ressu@google.com> | 2023-12-16 01:03:51 +0000 |
|---|---|---|
| committer | KevinOConnor <kevin@koconnor.net> | 2023-12-17 11:13:33 -0500 |
| commit | 3417940fd82adf621f429f42289d3693ee832582 (patch) | |
| tree | e9f1cc9072cc333b2e3fe715cc7f60cc5c5024b8 /klippy/extras | |
| parent | 2defd7374a8c7636e8fccaa1855eb8d75d7c070b (diff) | |
| download | kutter-3417940fd82adf621f429f42289d3693ee832582.tar.gz kutter-3417940fd82adf621f429f42289d3693ee832582.tar.xz kutter-3417940fd82adf621f429f42289d3693ee832582.zip | |
hall_filament_width_sensor: max filament diameter
Add support for maximum filament diameter to hall filament width sensor.
If the diameter of the filament diameter is larger than the limit, the
virtual runout sensor will trigger. The default value is set to maximum
flow adjustment threshold to prevent oversized filament from clogging.
Signed-off-by: Sami Haahtinen <ressu@ressukka.net>
Diffstat (limited to 'klippy/extras')
| -rw-r--r-- | klippy/extras/hall_filament_width_sensor.py | 5 |
1 files changed, 3 insertions, 2 deletions
diff --git a/klippy/extras/hall_filament_width_sensor.py b/klippy/extras/hall_filament_width_sensor.py index 276dd144..e0802887 100644 --- a/klippy/extras/hall_filament_width_sensor.py +++ b/klippy/extras/hall_filament_width_sensor.py @@ -30,7 +30,8 @@ class HallFilamentWidthSensor: - self.measurement_max_difference) self.diameter =self.nominal_filament_dia self.is_active =config.getboolean('enable', False) - self.runout_dia=config.getfloat('min_diameter', 1.0) + self.runout_dia_min=config.getfloat('min_diameter', 1.0) + self.runout_dia_max=config.getfloat('max_diameter', self.max_diameter) self.is_log =config.getboolean('logging', False) # Use the current diameter instead of nominal while the first # measurement isn't in place @@ -125,7 +126,7 @@ class HallFilamentWidthSensor: self.update_filament_array(last_epos) # Check runout self.runout_helper.note_filament_present( - self.diameter > self.runout_dia) + self.runout_dia_min <= self.diameter <= self.runout_dia_max) # Does filament exists if self.diameter > 0.5: if len(self.filament_array) > 0: |