diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2021-06-22 21:10:12 -0400 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2021-07-04 10:11:02 -0400 |
| commit | 59fe8782415718b03eb89dd00f25ed1d6cb1ac32 (patch) | |
| tree | d324ef31d976634fb2fc3e27c8f10434b79a42f5 /klippy/extras/temperature_mcu.py | |
| parent | 045bfa4e8d177ca934815dd16fa8700543578328 (diff) | |
| download | kutter-59fe8782415718b03eb89dd00f25ed1d6cb1ac32.tar.gz kutter-59fe8782415718b03eb89dd00f25ed1d6cb1ac32.tar.xz kutter-59fe8782415718b03eb89dd00f25ed1d6cb1ac32.zip | |
rp2040: Add initial adc support
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'klippy/extras/temperature_mcu.py')
| -rw-r--r-- | klippy/extras/temperature_mcu.py | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/klippy/extras/temperature_mcu.py b/klippy/extras/temperature_mcu.py index 4643d54e..188ad316 100644 --- a/klippy/extras/temperature_mcu.py +++ b/klippy/extras/temperature_mcu.py @@ -62,6 +62,7 @@ class PrinterTemperatureMCU: self.mcu_type = mcu.get_constants().get("MCU", "") # Run MCU specific configuration cfg_funcs = [ + ('rp2040', self.config_rp2040), ('sam3', self.config_sam3), ('sam4', self.config_sam4), ('samd21', self.config_samd21), ('samd51', self.config_samd51), ('stm32f1', self.config_stm32f1), ('stm32f2', self.config_stm32f2), @@ -89,6 +90,9 @@ class PrinterTemperatureMCU: def config_unknown(self): raise self.printer.config_error("MCU temperature not supported on %s" % (self.mcu_type,)) + def config_rp2040(self): + self.slope = 3.3 / -0.001721 + self.base_temperature = self.calc_base(27., 0.706 / 3.3) def config_sam3(self): self.slope = 3.3 / .002650 self.base_temperature = self.calc_base(27., 0.8 / 3.3) |