diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2020-04-25 13:27:41 -0400 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2020-04-25 14:26:45 -0400 |
| commit | 17123889f698e2339049bd18e7ece01b9c53e892 (patch) | |
| tree | e6899a2fcb2df8ca4e10bab9a15f0617ed912805 /klippy/extras/temperature_fan.py | |
| parent | d858498a53fe98ed705595b8639b50b219d6262f (diff) | |
| download | kutter-17123889f698e2339049bd18e7ece01b9c53e892.tar.gz kutter-17123889f698e2339049bd18e7ece01b9c53e892.tar.xz kutter-17123889f698e2339049bd18e7ece01b9c53e892.zip | |
heaters: Make heater.py an "extras" module
The heater logic is an independent module that does not need to be
treated as part of the "core" klipper code.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'klippy/extras/temperature_fan.py')
| -rw-r--r-- | klippy/extras/temperature_fan.py | 5 |
1 files changed, 3 insertions, 2 deletions
diff --git a/klippy/extras/temperature_fan.py b/klippy/extras/temperature_fan.py index 6fc2893b..cebeee1f 100644 --- a/klippy/extras/temperature_fan.py +++ b/klippy/extras/temperature_fan.py @@ -18,10 +18,11 @@ class TemperatureFan: self.gcode = self.printer.lookup_object('gcode') self.min_temp = config.getfloat('min_temp', minval=KELVIN_TO_CELSIUS) self.max_temp = config.getfloat('max_temp', above=self.min_temp) - self.sensor = self.printer.lookup_object('heater').setup_sensor(config) + pheaters = self.printer.try_load_module(config, 'heaters') + self.sensor = pheaters.setup_sensor(config) self.sensor.setup_minmax(self.min_temp, self.max_temp) self.sensor.setup_callback(self.temperature_callback) - self.printer.lookup_object('heater').register_sensor(config, self) + pheaters.register_sensor(config, self) self.speed_delay = self.sensor.get_report_time_delta() self.max_speed = config.getfloat('max_speed', 1., above=0., maxval=1.) self.min_speed = config.getfloat('min_speed', 0.3, minval=0., maxval=1.) |