diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2020-04-25 13:27:41 -0400 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2020-04-25 14:26:45 -0400 |
| commit | 17123889f698e2339049bd18e7ece01b9c53e892 (patch) | |
| tree | e6899a2fcb2df8ca4e10bab9a15f0617ed912805 /klippy/extras/heater_bed.py | |
| parent | d858498a53fe98ed705595b8639b50b219d6262f (diff) | |
| download | kutter-17123889f698e2339049bd18e7ece01b9c53e892.tar.gz kutter-17123889f698e2339049bd18e7ece01b9c53e892.tar.xz kutter-17123889f698e2339049bd18e7ece01b9c53e892.zip | |
heaters: Make heater.py an "extras" module
The heater logic is an independent module that does not need to be
treated as part of the "core" klipper code.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'klippy/extras/heater_bed.py')
| -rw-r--r-- | klippy/extras/heater_bed.py | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/klippy/extras/heater_bed.py b/klippy/extras/heater_bed.py index c3505528..c2f56a99 100644 --- a/klippy/extras/heater_bed.py +++ b/klippy/extras/heater_bed.py @@ -7,8 +7,8 @@ class PrinterHeaterBed: def __init__(self, config): self.printer = config.get_printer() - pheater = self.printer.lookup_object('heater') - self.heater = pheater.setup_heater(config, 'B') + pheaters = self.printer.try_load_module(config, 'heaters') + self.heater = pheaters.setup_heater(config, 'B') self.get_status = self.heater.get_status self.stats = self.heater.stats # Register commands @@ -21,8 +21,8 @@ class PrinterHeaterBed: temp = gcode.get_float('S', params, 0.) self.heater.set_temp(temp) if wait and temp: - pheater = self.printer.lookup_object('heater') - pheater.wait_for_temperature(self.heater) + pheaters = self.printer.lookup_object('heaters') + pheaters.wait_for_temperature(self.heater) def cmd_M190(self, params): # Set Bed Temperature and Wait self.cmd_M140(params, wait=True) |