diff options
| author | Adrian Keet <arkeet@gmail.com> | 2020-05-17 13:26:51 -0700 |
|---|---|---|
| committer | KevinOConnor <kevin@koconnor.net> | 2020-05-24 11:46:46 -0400 |
| commit | b2671783700fa1891454d5841985cb3c3b5c6db3 (patch) | |
| tree | c595c2d0cdb13cdca37a260b5fac3efe7431e414 /klippy/extras/controller_fan.py | |
| parent | 9530373ccbf71f652d0cd0a6d1a22c84f68247e6 (diff) | |
| download | kutter-b2671783700fa1891454d5841985cb3c3b5c6db3.tar.gz kutter-b2671783700fa1891454d5841985cb3c3b5c6db3.tar.xz kutter-b2671783700fa1891454d5841985cb3c3b5c6db3.zip | |
controller_fan: Add fan_speed parameter.
This gives it parity with heater_fan. Also change the default speed from
max_power to 1.0, since it is already scaled by max_power in set_speed.
Signed-off-by: Adrian Keet <arkeet@gmail.com>
Diffstat (limited to 'klippy/extras/controller_fan.py')
| -rw-r--r-- | klippy/extras/controller_fan.py | 10 |
1 files changed, 4 insertions, 6 deletions
diff --git a/klippy/extras/controller_fan.py b/klippy/extras/controller_fan.py index 89e365a9..1828a200 100644 --- a/klippy/extras/controller_fan.py +++ b/klippy/extras/controller_fan.py @@ -17,12 +17,10 @@ class ControllerFan: self.heaters = [] self.fan = fan.PrinterFan(config) self.mcu = self.fan.mcu_fan.get_mcu() - self.max_power = config.getfloat( - 'max_power', default=1., - minval=0., maxval=1.) + self.fan_speed = config.getfloat( + 'fan_speed', default=1., minval=0., maxval=1.) self.idle_speed = config.getfloat( - 'idle_speed', default=self.max_power, - minval=0., maxval=self.max_power) + 'idle_speed', default=self.fan_speed, minval=0., maxval=1.) self.idle_timeout = config.getint("idle_timeout", default=30, minval=0) self.heater_name = config.get("heater", "extruder") self.last_on = self.idle_timeout @@ -45,7 +43,7 @@ class ControllerFan: active = True if active: self.last_on = 0 - power = self.max_power + power = self.fan_speed elif self.last_on < self.idle_timeout: power = self.idle_speed self.last_on += 1 |