chipmisc: Add multi_pin capability

Add the ability to alias multiple output pins from a single pin alias.
This makes it possible to support some cases where a single logical
output is driven by multiple output pins.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

1 files changed, 50 insertions, 0 deletions

diff --git a/klippy/chipmisc.py b/klippy/chipmisc.py
index 6fae2868..658307c0 100644
--- a/klippy/chipmisc.py
+++ b/klippy/chipmisc.py
@@ -76,6 +76,54 @@ class PrinterPin:
         self.last_value = value
         self.last_value_time = print_time
 
+class PrinterMultiPin:
+    def __init__(self, printer, config):
+        self.printer = printer
+        try:
+            pins.get_printer_pins(printer).register_chip('multi_pin', self)
+        except pins.error:
+            pass
+        self.pin_type = None
+        self.pin_list = [pin.strip() for pin in config.get('pins').split(',')]
+        self.mcu_pins = []
+    def setup_pin(self, pin_params):
+        pin_name = pin_params['pin']
+        pin = self.printer.objects.get('multi_pin ' + pin_name)
+        if pin is not self:
+            if pin is None:
+                raise pins.error("multi_pin %s not configured" % (pin_name,))
+            return pin.setup_pin(pin_params)
+        if self.pin_type is not None:
+            raise pins.error("Can't setup multi_pin %s twice" % (pin_name,))
+        self.pin_type = pin_params['type']
+        invert = ""
+        if pin_params['invert']:
+            invert = "!"
+        self.mcu_pins = [
+            pins.setup_pin(self.printer, self.pin_type, invert + pin_desc)
+            for pin_desc in self.pin_list]
+        return self
+    def get_mcu(self):
+        return self.mcu_pins[0].get_mcu()
+    def setup_max_duration(self, max_duration):
+        for mcu_pin in self.mcu_pins:
+            mcu_pin.setup_max_duration(max_duration)
+    def setup_start_value(self, start_value, shutdown_value):
+        for mcu_pin in self.mcu_pins:
+            mcu_pin.setup_start_value(start_value, shutdown_value)
+    def setup_cycle_time(self, cycle_time):
+        for mcu_pin in self.mcu_pins:
+            mcu_pin.setup_cycle_time(cycle_time)
+    def setup_hard_pwm(self, hard_cycle_ticks):
+        for mcu_pin in self.mcu_pins:
+            mcu_pin.setup_hard_pwm(hard_cycle_ticks)
+    def set_digital(self, print_time, value):
+        for mcu_pin in self.mcu_pins:
+            mcu_pin.set_digital(print_time, value)
+    def set_pwm(self, print_time, value):
+        for mcu_pin in self.mcu_pins:
+            mcu_pin.set_pwm(print_time, value)
+
 
 ######################################################################
 # Servos
@@ -350,6 +398,8 @@ def add_printer_objects(printer, config):
         printer.add_object('pin' + s.section[17:], PrinterPin(printer, s))
     for s in config.get_prefix_sections('pwm_output '):
         printer.add_object('pin' + s.section[10:], PrinterPin(printer, s))
+    for s in config.get_prefix_sections('multi_pin '):
+        printer.add_object(s.section, PrinterMultiPin(printer, s))
     for s in config.get_prefix_sections('servo '):
         printer.add_object(s.section, PrinterServo(printer, s))
     for s in config.get_prefix_sections('ad5206 '):