diff options
| author | Clifford Roche <clifford.roche@gmail.com> | 2021-04-14 11:37:24 -0400 |
|---|---|---|
| committer | GitHub <noreply@github.com> | 2021-04-14 11:37:24 -0400 |
| commit | e7b0e7b43bbf20bf89f47444fbbfc0e10aca1ed1 (patch) | |
| tree | 146043342b0bca9f73e0025a23d5d2d47a8b8c66 /docs | |
| parent | 316b49c6bfb91683eedba70d2674b60091b09e7e (diff) | |
| download | kutter-e7b0e7b43bbf20bf89f47444fbbfc0e10aca1ed1.tar.gz kutter-e7b0e7b43bbf20bf89f47444fbbfc0e10aca1ed1.tar.xz kutter-e7b0e7b43bbf20bf89f47444fbbfc0e10aca1ed1.zip | |
palette2: Add ping variation + ping status reports (#4114)
Signed-off-by: Clifford Roche <clifford.roche@gmail.com>
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/Command_Templates.md | 6 | ||||
| -rw-r--r-- | docs/Config_Reference.md | 6 |
2 files changed, 10 insertions, 2 deletions
diff --git a/docs/Command_Templates.md b/docs/Command_Templates.md index 91ba7276..503066f7 100644 --- a/docs/Command_Templates.md +++ b/docs/Command_Templates.md @@ -313,6 +313,12 @@ The following are common printer attributes: - `printer.system_stats.sysload`, `printer.system_stats.cputime`, `printer.system_stats.memavail`: Information on the host operating system and process load. +- `printer.palette2.ping`: Amount of the last reported Palette 2 ping + in percent. +- `printer.palette2.remaining_load_length`: When starting a Palette 2 + print, this will be the amount of filament to load into the extruder. +- `printer.palette2.is_splicing`: True when the Palette 2 is splicing + filament. The above list is subject to change - if using an attribute be sure to review the [Config Changes document](Config_Changes.md) when upgrading diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md index 4322ae3b..8035ce68 100644 --- a/docs/Config_Reference.md +++ b/docs/Config_Reference.md @@ -3903,12 +3903,14 @@ for your print to begin. [palette2] serial: # The serial port to connect to the Palette 2. -#baud: 250000 -# The baud rate to use. The default is 250000. +#baud: 115200 +# The baud rate to use. The default is 115200. #feedrate_splice: 0.8 # The feedrate to use when splicing, default is 0.8 #feedrate_normal: 1.0 # The feedrate to use after splicing, default is 1.0 #auto_load_speed: 2 # Extrude feedrate when autoloading, default is 2 (mm/s) +#auto_cancel_variation: 0.1 +# Auto cancel print when ping varation is above this threshold ``` |