diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2021-07-03 22:52:42 -0400 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2021-07-04 09:48:45 -0400 |
| commit | d1bdde56cced15cdc76625e4e1075abdcda3c9b5 (patch) | |
| tree | d9bfabce6e428d6b57311c5bfa7e93672628f09f /docs | |
| parent | df43c9e9bff1f638ad41c27e4f6bb6e757d26ea5 (diff) | |
| download | kutter-d1bdde56cced15cdc76625e4e1075abdcda3c9b5.tar.gz kutter-d1bdde56cced15cdc76625e4e1075abdcda3c9b5.tar.xz kutter-d1bdde56cced15cdc76625e4e1075abdcda3c9b5.zip | |
samd_sercom: Specify the sercom explicitly in a config option
Do not infer the sercom from the config section name, as that
prevents one from using SPI buses on multiple samd mcus.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/Config_Changes.md | 3 | ||||
| -rw-r--r-- | docs/Config_Reference.md | 14 |
2 files changed, 12 insertions, 5 deletions
diff --git a/docs/Config_Changes.md b/docs/Config_Changes.md index 65a4890a..8e761a95 100644 --- a/docs/Config_Changes.md +++ b/docs/Config_Changes.md @@ -6,6 +6,9 @@ All dates in this document are approximate. # Changes +20210703: A `samd_sercom` config section must now specify the sercom +bus it is configuring via the `sercom` option. + 20210612: The `pid_integral_max` config option in heater and temperature_fan sections is deprecated. The option will be removed in the near future. diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md index 94b8d88f..f271d8d5 100644 --- a/docs/Config_Reference.md +++ b/docs/Config_Reference.md @@ -3793,13 +3793,17 @@ i2c_address: ## [samd_sercom] SAMD SERCOM configuration to specify which pins to use on a given -SERCOM. One may define one section with the "samd_sercom" prefix per -SERCOM available. Each SERCOM must be configured prior to using it as -SPI or I2C peripheral. Place this config section above any other -section that makes use of SPI or I2C buses. +SERCOM. One may define any number of sections with a "samd_sercom" +prefix. Each SERCOM must be configured prior to using it as SPI or I2C +peripheral. Place this config section above any other section that +makes use of SPI or I2C buses. ``` -[samd_sercom sercom0] +[samd_sercom my_sercom] +sercom: +# The name of the sercom bus to configure in the micro-controller. +# Available names are "sercom0", "sercom1", etc.. This parameter +# must be provided. tx_pin: # MOSI pin for SPI communication, or SDA (data) pin for I2C # communication. The pin must have a valid pinmux configuration |