docs: Update Features.md to reflect recent work

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

1 files changed, 8 insertions, 5 deletions

diff --git a/docs/Features.md b/docs/Features.md
index a5325e05..24d59b04 100644
--- a/docs/Features.md
+++ b/docs/Features.md
@@ -102,11 +102,13 @@ Klipper supports many standard 3d printer features:
   printers.
 
 * Automatic bed leveling support. Klipper can be configured for basic
-  bed tilt detection or full mesh bed leveling. If the bed uses
+  bed tilt detection or full mesh bed leveling. The bed mesh can be
+  customized to the print size (adaptive bed mesh). If the bed uses
   multiple Z steppers then Klipper can also level by independently
   manipulating the Z steppers. Most Z height probes are supported,
   including BL-Touch probes and servo activated probes. Probes may be
-  calibrated for axis twist compensation.
+  calibrated for axis twist compensation. If using an "eddy current
+  probe" then one can utilize fast bed mesh scanning,
 
 * Automatic delta calibration support. The calibration tool can
   perform basic height calibration as well as an enhanced X and Y
@@ -118,7 +120,7 @@ Klipper supports many standard 3d printer features:
 
 * Support for common temperature sensors (eg, common thermistors,
   AD595, AD597, AD849x, PT100, PT1000, MAX6675, MAX31855, MAX31856,
-  MAX31865, BME280, HTU21D, DS18B20, AHT10, and LM75). Custom
+  MAX31865, BME280, HTU21D, DS18B20, AHT10, SHT3x, and LM75). Custom
   thermistors and custom analog temperature sensors can also be
   configured. One can monitor the internal micro-controller
   temperature sensor and the internal temperature sensor of a
@@ -128,7 +130,8 @@ Klipper supports many standard 3d printer features:
 
 * Support for standard fans, nozzle fans, and temperature controlled
   fans. No need to keep fans running when the printer is idle. Fan
-  speed can be monitored on fans that have a tachometer.
+  speed can be monitored on fans that have a tachometer. One can
+  assign a "math formula" to a fan for automatic fan speed updating.
 
 * Support for run-time configuration of TMC2130, TMC2208/TMC2224,
   TMC2209, TMC2240, TMC2660, and TMC5160 stepper motor drivers. There
@@ -154,7 +157,7 @@ Klipper supports many standard 3d printer features:
   filament width sensors.
 
 * Support for measuring and recording acceleration using adxl345,
-  mpu9250, mpu6050, and lis2dw12 accelerometers.
+  mpu9250, mpu6050, lis2dw12, lis3dh, and icm20948 accelerometers.
 
 * Support for limiting the top speed of short "zigzag" moves to reduce
   printer vibration and noise. See the [kinematics](Kinematics.md)