diff options
| author | Michael Kurz <michi.kurz@googlemail.com> | 2021-03-15 16:50:29 +0100 |
|---|---|---|
| committer | GitHub <noreply@github.com> | 2021-03-15 11:50:29 -0400 |
| commit | b4437f8eeeaddf60f893ceaeaf4d9ed06d57eeae (patch) | |
| tree | 2c1e1e3582746e3c09ca744a992a334d00a2aff9 /docs | |
| parent | 86a924f5a69d7f47c8a9f8d5ec98abf818fb402a (diff) | |
| download | kutter-b4437f8eeeaddf60f893ceaeaf4d9ed06d57eeae.tar.gz kutter-b4437f8eeeaddf60f893ceaeaf4d9ed06d57eeae.tar.xz kutter-b4437f8eeeaddf60f893ceaeaf4d9ed06d57eeae.zip | |
bme280: Add support for BMP280 and BME680 sensors (#4040)
This adds support for BMP280 and BME680 sensor ICs,
along with fixing calibration data readout for BME280.
Gas sensor readout for the BME680 is just the raw compensated value.
To get actual meaningful values, more research is needed.
Signed-off-by: Michael Kurz <michi.kurz@gmail.com>
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/Command_Templates.md | 3 | ||||
| -rw-r--r-- | docs/Config_Reference.md | 12 |
2 files changed, 8 insertions, 7 deletions
diff --git a/docs/Command_Templates.md b/docs/Command_Templates.md index 9e19422d..5296e52b 100644 --- a/docs/Command_Templates.md +++ b/docs/Command_Templates.md @@ -264,7 +264,8 @@ The following are common printer attributes: the config file if a `SET_RETRACTION` command alters them. - `printer["bme280 <sensor_name>"].temperature`, `printer["bme280 <sensor_name>"].humidity`, - `printer["bme280 <sensor_name>"].pressure`: The last read values + `printer["bme280 <sensor_name>"].pressure`, + `printer["bme280 <sensor_name>"].gas`: The last read values from the sensor. - `printer["htu21d <sensor_name>"].temperature`, `printer["htu21d <sensor_name>"].humidity`: The last read values diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md index b27da60b..9b4aa1de 100644 --- a/docs/Config_Reference.md +++ b/docs/Config_Reference.md @@ -2039,13 +2039,13 @@ sensor_pin: # name in the above list. ``` -## BME280 temperature sensor +## BMP280/BME280/BME680 temperature sensor -BME280 two wire interface (I2C) environmental sensor. Note that this -sensor is not intended for use with extruders and heater beds, but -rather for monitoring ambient temperature (C), pressure (hPa), and -relative humidity. See -[sample-macros.cfg](../config/sample-macros.cfg) for a gcode_macro +BMP280/BME280/BME680 two wire interface (I2C) environmental sensors. +Note that thoose sensors aee not intended for use with extruders and +heater beds, but rather for monitoring ambient temperature (C), +pressure (hPa), relative humidity and in case of the BME680 gas level. +See [sample-macros.cfg](../config/sample-macros.cfg) for a gcode_macro that may be used to report pressure and humidity in addition to temperature. |