diff options
| author | Matt Shirley <mdshw5@gmail.com> | 2020-02-13 20:52:31 -0500 |
|---|---|---|
| committer | GitHub <noreply@github.com> | 2020-02-13 20:52:31 -0500 |
| commit | b0b950b7e1fceb395a0d40eb0bb47ba9396c3f2e (patch) | |
| tree | 042e2cdc36d9f38008ecd2cdc431e55c62322fb1 /docs | |
| parent | 9818055ac3fa0accdf117a9523a93abe0b2073ea (diff) | |
| download | kutter-b0b950b7e1fceb395a0d40eb0bb47ba9396c3f2e.tar.gz kutter-b0b950b7e1fceb395a0d40eb0bb47ba9396c3f2e.tar.xz kutter-b0b950b7e1fceb395a0d40eb0bb47ba9396c3f2e.zip | |
config: Add Wanhao Duplicator 9 MK1 (#2497)
Also applies to the Monoprice Maker Pro MK1.
This config is based on the version from Chris Barnes (https://www.facebook.com/Jarannis)
found on https://pastebin.com/raw/wm8PQezy. This config was mostly working and I
only had to change a few things:
- updated key names for min_point and max_point to mesh_min and mesh_max
- enabled PID control
- tweaked bounds to allow movement during mesh leveling
- removed all comments
- decreased homing speed slightly
- sane bed mesh sample defaults
In response to Kevin O'Connor:
- remove pressure_advance setting from extruder section
- remove respond section
- remove pause_resume section
Signed-off-by: Matt Shirley <mdshw5@gmail.com>
Diffstat (limited to 'docs')
0 files changed, 0 insertions, 0 deletions