diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2016-06-14 15:15:34 -0400 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2016-06-14 15:17:03 -0400 |
| commit | afb1839b6bc60730e73b0b3fa6fad0804555193d (patch) | |
| tree | 5ac20068941edeacb5177cfa95aa1d6193c666db /docs | |
| parent | cc62a3dbf387dffe2d7e836c64cb5f5169971f05 (diff) | |
| download | kutter-afb1839b6bc60730e73b0b3fa6fad0804555193d.tar.gz kutter-afb1839b6bc60730e73b0b3fa6fad0804555193d.tar.xz kutter-afb1839b6bc60730e73b0b3fa6fad0804555193d.zip | |
docs: Update documentation with Arduino Due installation info
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/Installation.md | 21 |
1 files changed, 18 insertions, 3 deletions
diff --git a/docs/Installation.md b/docs/Installation.md index aae13511..8116673f 100644 --- a/docs/Installation.md +++ b/docs/Installation.md @@ -23,7 +23,9 @@ following commands: ``` sudo apt-get update -sudo apt-get install avrdude gcc-avr binutils-avr avr-libc libncurses-dev +sudo apt-get install libncurses-dev +sudo apt-get install avrdude gcc-avr binutils-avr avr-libc # AVR toolchain +sudo apt-get install bossa-cli libnewlib-arm-none-eabi # ARM toolchain ``` The host software (Klippy) requires a one-time setup - run as the @@ -60,8 +62,8 @@ make Ignore any warnings you may see about "misspelled signal handler" (it is due to a bug fixed in gcc v4.8.3). -Installing Klipper on a micro-controller ----------------------------------------- +Installing Klipper on an AVR micro-controller +--------------------------------------------- The avrdude package can be used to install the micro-controller code on an AVR ATmega chip. The exact syntax of the avrdude command is @@ -72,6 +74,19 @@ command for atmega2560 chips: example-only$ avrdude -C/etc/avrdude.conf -v -patmega2560 -cwiring -P/dev/ttyACM0 -b115200 -D -Uflash:w:/home/pi/klipper/out/klipper.elf.hex:i ``` +Installing Klipper on an Arduino Due +------------------------------------ + +Klipper currently uses the Arduino Due USB programming port (it will +not work when connected to the application USB port). The programming +port is the USB port closest to the power supply. To flash Klipper to +the Due connect it to the host machine and run: + +``` +stty -F /dev/ttyACM0 1200 +bossac -i -p ttyACM0 -R -e -w -v -b ~/klipper/out/klipper.bin +``` + Setting up the printer configuration ==================================== |