diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2019-11-12 18:18:32 -0500 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2019-11-12 18:45:31 -0500 |
| commit | 77dff35faefe18cc9cc567ec4428fd7f59ad4e24 (patch) | |
| tree | 98b30042a7d20fd9b236bf24175fd341f4ed3b56 /docs | |
| parent | a4995c61c986d947af03b6f90c945cfcf8577811 (diff) | |
| download | kutter-77dff35faefe18cc9cc567ec4428fd7f59ad4e24.tar.gz kutter-77dff35faefe18cc9cc567ec4428fd7f59ad4e24.tar.xz kutter-77dff35faefe18cc9cc567ec4428fd7f59ad4e24.zip | |
tmc: Remove virtual_enable support and replace with automatic support
Automatically detect if the stepper has a dedicated enable line. If
it does not, then automatically enable virtual enable support.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/Config_Changes.md | 5 |
1 files changed, 5 insertions, 0 deletions
diff --git a/docs/Config_Changes.md b/docs/Config_Changes.md index ff8f601e..059641e3 100644 --- a/docs/Config_Changes.md +++ b/docs/Config_Changes.md @@ -6,6 +6,11 @@ All dates in this document are approximate. # Changes +20191112: The tmc stepper driver virtual enable capability is now +automatically enabled if the stepper does not have a dedicated stepper +enable pin. Remove references to tmcXXXX:virtual_enable from the +config. + 20191107: The primary extruder config section must be specified as "extruder" and may no longer be specified as "extruder0". Gcode command templates that query the extruder status are now accessed via |