diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2020-03-22 11:00:02 -0400 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2020-03-22 11:00:02 -0400 |
| commit | 7543876487d5949854a3cb52a26e3a894356f3ac (patch) | |
| tree | fd6172a543404cb3ba1fc9ae039654a5014dd249 /docs | |
| parent | df6ca2ea1d403cc272d20e9aaea9c9d774fe002e (diff) | |
| download | kutter-7543876487d5949854a3cb52a26e3a894356f3ac.tar.gz kutter-7543876487d5949854a3cb52a26e3a894356f3ac.tar.xz kutter-7543876487d5949854a3cb52a26e3a894356f3ac.zip | |
docs: Add info on S3D "extra retract distance" to Slicers.md
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/Slicers.md | 7 |
1 files changed, 7 insertions, 0 deletions
diff --git a/docs/Slicers.md b/docs/Slicers.md index 7c8ffb1c..51abfd15 100644 --- a/docs/Slicers.md +++ b/docs/Slicers.md @@ -50,6 +50,13 @@ between moves. This is likely to make blobbing worse, not better. In contrast, it is okay (and often helpful) to use a slicer's "retract" setting, "wipe" setting, and/or "wipe on retract" setting. +# Do not use "extra restart distance" on Simplify3d + +This setting can cause dramatic changes to extrusion rates which can +trigger Klipper's maximum extrusion cross-section check. Consider +using Klipper's [pressure advance](Pressure_Advance.md) or the regular +Simplify3d retract setting instead. + # Disable "PreloadVE" on KISSlicer If using KISSlicer slicing software then set "PreloadVE" to |