diff options
| author | Arksine <arksine.code@gmail.com> | 2020-07-31 18:10:31 -0400 |
|---|---|---|
| committer | KevinOConnor <kevin@koconnor.net> | 2020-08-05 13:46:24 -0400 |
| commit | 74c0e3a4849b9d4444bfe378fbf7be62d2d3ee43 (patch) | |
| tree | 329c672c3144a341c26b8edfc89224329d4b106b /docs | |
| parent | 6b1ad715aa05c8444f6a4945fba1fee0b191253e (diff) | |
| download | kutter-74c0e3a4849b9d4444bfe378fbf7be62d2d3ee43.tar.gz kutter-74c0e3a4849b9d4444bfe378fbf7be62d2d3ee43.tar.xz kutter-74c0e3a4849b9d4444bfe378fbf7be62d2d3ee43.zip | |
docs: document changes to the virtual_sdcard module
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/Config_Changes.md | 6 | ||||
| -rw-r--r-- | docs/G-Codes.md | 5 |
2 files changed, 11 insertions, 0 deletions
diff --git a/docs/Config_Changes.md b/docs/Config_Changes.md index 6f7e5217..ea4bf198 100644 --- a/docs/Config_Changes.md +++ b/docs/Config_Changes.md @@ -6,6 +6,12 @@ All dates in this document are approximate. # Changes +20200731: The behavior of the `progress` attribute reported by +the `virtual_sdcard` printer object has changed. Progress is no +longer reset to 0 when a print is paused. It will now always report +progress based on the internal file position, or 0 if no file is +currently loaded. + 20200725: The servo `enable` config parameter and the SET_SERVO `ENABLE` parameter have been removed. Update any macros to use `SET_SERVO SERVO=my_servo WIDTH=0` to disable a servo. diff --git a/docs/G-Codes.md b/docs/G-Codes.md index 96f28173..35523839 100644 --- a/docs/G-Codes.md +++ b/docs/G-Codes.md @@ -60,6 +60,11 @@ Klipper also supports the following standard G-Code commands if the - Set SD position: `M26 S<offset>` - Report SD print status: `M27` +In addition, the following extended commands are availble when the +"virtual_sdcard" config section is enabled. +- Load a file and start SD print: `SDCARD_PRINT_FILE FILENAME=<filename>` +- Unload file and clear SD state: `SDCARD_RESET_FILE` + ## G-Code arcs The following standard G-Code commands are available if a "gcode_arcs" |