diff options
| author | Scott Mudge <19617165+scottmudge@users.noreply.github.com> | 2023-04-15 19:17:54 -0400 |
|---|---|---|
| committer | GitHub <noreply@github.com> | 2023-04-15 19:17:54 -0400 |
| commit | 4748dffd7a0fcf736b270b6d37c5e6fbb8f07805 (patch) | |
| tree | bd6cb452ba6e9f8d80259f669aecb3c757ea3303 /docs | |
| parent | a8b1b0ef0572f07f04f0d68969ef042fff290fa7 (diff) | |
| download | kutter-4748dffd7a0fcf736b270b6d37c5e6fbb8f07805.tar.gz kutter-4748dffd7a0fcf736b270b6d37c5e6fbb8f07805.tar.xz kutter-4748dffd7a0fcf736b270b6d37c5e6fbb8f07805.zip | |
docs: Add AHT10 temperature sensor doc section in Config_Reference.md (followup #6138) (#6167)
Followed general outline used by HTU21D and BME280.
Signed-off-by: Scott Mudge <mail@scottmudge.com>
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/Config_Reference.md | 23 |
1 files changed, 23 insertions, 0 deletions
diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md index 7aab31d7..eda1a06e 100644 --- a/docs/Config_Reference.md +++ b/docs/Config_Reference.md @@ -2375,6 +2375,29 @@ sensor_type: BME280 # above parameters. ``` +### AHT10 temperature sensor + +AHT10 two wire interface (I2C) environmental sensor. +Note that these sensors are not intended for use with extruders and +heater beds, but rather for monitoring ambient temperature (C) and +relative humidity. See +[sample-macros.cfg](../config/sample-macros.cfg) for a gcode_macro +that may be used to report humidity in addition to temperature. + +``` +sensor_type: AHT10 +#i2c_address: +# Default is 56 (0x38). Some AHT10 sensors give the option to use +# 57 (0x39) by moving a resistor. +#i2c_mcu: +#i2c_bus: +#i2c_speed: +# See the "common I2C settings" section for a description of the +# above parameters. +#aht10_report_time: +# Interval in seconds between readings. Default is 30, minimum is 5 +``` + ### HTU21D sensor HTU21D family two wire interface (I2C) environmental sensor. Note that |