docs: Update documentation with new klipper github URL

The main code repository moved from
https://github.com/KevinOConnor/klipper.git to
https://github.com/Klipper3d/klipper.git .

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

7 files changed, 14 insertions, 14 deletions

diff --git a/docs/Code_Overview.md b/docs/Code_Overview.md
index f6a73247..1ccec14b 100644
--- a/docs/Code_Overview.md
+++ b/docs/Code_Overview.md
@@ -381,16 +381,16 @@ Useful steps:
    micro-controller communication protocol to a human readable form.
 5. Add support for timer dispatch from hardware interrupts. See
    Klipper
-   [commit 970831ee](https://github.com/KevinOConnor/klipper/commit/970831ee0d3b91897196e92270d98b2a3067427f)
+   [commit 970831ee](https://github.com/Klipper3d/klipper/commit/970831ee0d3b91897196e92270d98b2a3067427f)
    as an example of steps 1-5 done for the LPC176x architecture.
 6. Bring up basic GPIO input and output support. See Klipper
-   [commit c78b9076](https://github.com/KevinOConnor/klipper/commit/c78b90767f19c9e8510c3155b89fb7ad64ca3c54)
+   [commit c78b9076](https://github.com/Klipper3d/klipper/commit/c78b90767f19c9e8510c3155b89fb7ad64ca3c54)
    as an example of this.
 7. Bring up additional peripherals - for example see Klipper commit
-   [65613aed](https://github.com/KevinOConnor/klipper/commit/65613aeddfb9ef86905cb1dade9e773a02ef3c27),
-   [c812a40a](https://github.com/KevinOConnor/klipper/commit/c812a40a3782415e454b04bf7bd2158a6f0ec8b5),
+   [65613aed](https://github.com/Klipper3d/klipper/commit/65613aeddfb9ef86905cb1dade9e773a02ef3c27),
+   [c812a40a](https://github.com/Klipper3d/klipper/commit/c812a40a3782415e454b04bf7bd2158a6f0ec8b5),
    and
-   [c381d03a](https://github.com/KevinOConnor/klipper/commit/c381d03aad5c3ee761169b7c7bced519cc14da29).
+   [c381d03a](https://github.com/Klipper3d/klipper/commit/c381d03aad5c3ee761169b7c7bced519cc14da29).
 8. Create a sample Klipper config file in the config/ directory. Test
    the micro-controller with the main klippy.py program.
 9. Consider adding build test cases in the test/ directory.
diff --git a/docs/Contact.md b/docs/Contact.md
index 379bd01c..735084d3 100644
--- a/docs/Contact.md
+++ b/docs/Contact.md
@@ -106,11 +106,11 @@ bug. Please follow these steps:
    experiencing similar issues then you can search the
    [Klipper Community Forum](#community-forum).
 2. Make sure you are running unmodified code from
-   [https://github.com/KevinOConnor/klipper](https://github.com/KevinOConnor/klipper).
+   [https://github.com/Klipper3d/klipper](https://github.com/Klipper3d/klipper).
    If the code has been modified or is obtained from another source,
    then you will need to reproduce the problem on the unmodified code
    from
-   [https://github.com/KevinOConnor/klipper](https://github.com/KevinOConnor/klipper)
+   [https://github.com/Klipper3d/klipper](https://github.com/Klipper3d/klipper)
    prior to reporting an issue.
 3. If possible, run an `M112` command in the OctoPrint terminal window
    immediately after the undesirable event occurs. This causes Klipper
@@ -139,7 +139,7 @@ bug. Please follow these steps:
    5. If the log file is very large (eg, greater than 2MB) then one
       may need to compress the log with zip or gzip.
 5. Open a new github issue at
-   [https://github.com/KevinOConnor/klipper/issues](https://github.com/KevinOConnor/klipper/issues)
+   [https://github.com/Klipper3d/klipper/issues](https://github.com/Klipper3d/klipper/issues)
    and provide a clear description of the problem. The Klipper
    developers need to understand what steps were taken, what the
    desired outcome was, and what outcome actually occurred. The
diff --git a/docs/Debugging.md b/docs/Debugging.md
index 59e5e483..6869fe03 100644
--- a/docs/Debugging.md
+++ b/docs/Debugging.md
@@ -15,7 +15,7 @@ The source code "whitespace check" can be run with:
 
 The Klippy regression test suite requires "data dictionaries" from
 many platforms. The easiest way to obtain them is to
-[download them from github](https://github.com/KevinOConnor/klipper/issues/1438).
+[download them from github](https://github.com/Klipper3d/klipper/issues/1438).
 Once the data dictionaries are downloaded, use the following to run
 the regression suite:
 ```
diff --git a/docs/Installation.md b/docs/Installation.md
index faf4d71c..3c251a69 100644
--- a/docs/Installation.md
+++ b/docs/Installation.md
@@ -30,7 +30,7 @@ ssh utility to connect to the Raspberry Pi (ssh pi@octopi -- password
 is "raspberry") and run the following commands:
 
 ```
-git clone https://github.com/KevinOConnor/klipper
+git clone https://github.com/Klipper3d/klipper
 ./klipper/scripts/install-octopi.sh
 ```
 
diff --git a/docs/_klipper3d/mkdocs.yml b/docs/_klipper3d/mkdocs.yml
index c7724dc0..f173f6b5 100644
--- a/docs/_klipper3d/mkdocs.yml
+++ b/docs/_klipper3d/mkdocs.yml
@@ -2,8 +2,8 @@
 
 # Site and directory configuration
 site_name: Klipper documentation
-repo_url: https://github.com/KevinOConnor/klipper
-repo_name: KevinOConnor/klipper
+repo_url: https://github.com/Klipper3d/klipper
+repo_name: Klipper3d/klipper
 edit_uri: blob/master/docs/
 use_directory_urls: False
 docs_dir: '../'
diff --git a/docs/beaglebone.md b/docs/beaglebone.md
index f8c798b8..4ea3659c 100644
--- a/docs/beaglebone.md
+++ b/docs/beaglebone.md
@@ -15,7 +15,7 @@ Then ssh into the beaglebone machine (ssh debian@beaglebone --
 password is "temppwd") and install Klipper by running the following
 commands:
 ```
-git clone https://github.com/KevinOConnor/klipper
+git clone https://github.com/Klipper3d/klipper
 ./klipper/scripts/install-beaglebone.sh
 ```
 
diff --git a/docs/index.md b/docs/index.md
index 37eca645..efbae621 100644
--- a/docs/index.md
+++ b/docs/index.md
@@ -14,4 +14,4 @@ should use Klipper.
 To begin using Klipper start by [installing](Installation.md) it.
 
 Klipper is Free Software. Read the [documentation](Overview.md) or
-view [the Klipper code on github](https://github.com/KevinOConnor/klipper).
+view [the Klipper code on github](https://github.com/Klipper3d/klipper).