diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2018-10-28 14:19:30 -0400 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2018-10-28 14:22:30 -0400 |
| commit | c4058f71fb0b150baeb0b7ea853ea2cc9a4c533f (patch) | |
| tree | 5ee1b232873e8326c0b37e77f514ebe32ebe5a7c /docs/G-Codes.md | |
| parent | 057acb07b7825b4175ae7159ec9358b80a8b1354 (diff) | |
| download | kutter-c4058f71fb0b150baeb0b7ea853ea2cc9a4c533f.tar.gz kutter-c4058f71fb0b150baeb0b7ea853ea2cc9a4c533f.tar.xz kutter-c4058f71fb0b150baeb0b7ea853ea2cc9a4c533f.zip | |
docs: Clarify M109/M190 in G-Code documentation
Signed-off-by: Lucas Fink <software@lfcode.ca>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'docs/G-Codes.md')
| -rw-r--r-- | docs/G-Codes.md | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/docs/G-Codes.md b/docs/G-Codes.md index 27349f9d..38ae2ca3 100644 --- a/docs/G-Codes.md +++ b/docs/G-Codes.md @@ -19,8 +19,12 @@ Klipper supports the following standard G-Code commands: - Get extruder temperature: `M105` - Set extruder temperature: `M104 [T<index>] [S<temperature>]` - Set extruder temperature and wait: `M109 [T<index>] S<temperature>` + - Note: M109 always waits for temperature to settle at requested + value - Set bed temperature: `M140 [S<temperature>]` - Set bed temperature and wait: `M190 S<temperature>` + - Note: M190 always waits for temperature to settle at requested + value - Set fan speed: `M106 S<value>` - Turn fan off: `M107` - Emergency stop: `M112` |