diff options
| author | Justin Schuh <jschuh@users.noreply.github.com> | 2020-12-24 08:34:26 -0800 |
|---|---|---|
| committer | GitHub <noreply@github.com> | 2020-12-24 11:34:26 -0500 |
| commit | a5ebe5825aa6bbb58b3c755fab77b3472cceed8a (patch) | |
| tree | ce2e63d8e974207a9b6106f3f08c28fd27d18030 /docs/G-Codes.md | |
| parent | 1a9218532be81f6a3f8670aa5627aa305b7b43ff (diff) | |
| download | kutter-a5ebe5825aa6bbb58b3c755fab77b3472cceed8a.tar.gz kutter-a5ebe5825aa6bbb58b3c755fab77b3472cceed8a.tar.xz kutter-a5ebe5825aa6bbb58b3c755fab77b3472cceed8a.zip | |
heaters: Make MINIMUM optional for TEMPERATURE_WAIT command (#3674)
Signed-off-by: Justin Schuh <code@justinschuh.com>
Diffstat (limited to 'docs/G-Codes.md')
| -rw-r--r-- | docs/G-Codes.md | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/docs/G-Codes.md b/docs/G-Codes.md index 06c1a7d0..c61a6031 100644 --- a/docs/G-Codes.md +++ b/docs/G-Codes.md @@ -156,9 +156,9 @@ The following standard commands are supported: /tmp/heattest.txt will be created with a log of all temperature samples taken during the test. - `TURN_OFF_HEATERS`: Turn off all heaters. -- `TEMPERATURE_WAIT SENSOR=<config_name> MINIMUM=<target> [MAXIMUM=<target>]`: - Wait until the given temperature sensor is at or above the given - minumum target, and (if specified) at or below the maximum target. +- `TEMPERATURE_WAIT SENSOR=<config_name> [MINIMUM=<target>] [MAXIMUM=<target>]`: + Wait until the given temperature sensor is at or above the supplied + MINIMUM and/or at or below the supplied MAXIMUM. - `SET_VELOCITY_LIMIT [VELOCITY=<value>] [ACCEL=<value>] [ACCEL_TO_DECEL=<value>] [SQUARE_CORNER_VELOCITY=<value>]`: Modify the printer's velocity limits. Note that one may only set values |