diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2022-04-05 20:48:08 -0400 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2022-04-07 11:43:52 -0400 |
| commit | f0700c09858b36fa1bf4c82992e5a0a245d4bc29 (patch) | |
| tree | 37b8c8bca708509ce66b3848b07001c92b005b65 /docs/Config_Reference.md | |
| parent | 61792e3e31bf919fb5afe988abdfab2f06e97e6d (diff) | |
| download | kutter-f0700c09858b36fa1bf4c82992e5a0a245d4bc29.tar.gz kutter-f0700c09858b36fa1bf4c82992e5a0a245d4bc29.tar.xz kutter-f0700c09858b36fa1bf4c82992e5a0a245d4bc29.zip | |
pca9632: Support using hardware I2C
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'docs/Config_Reference.md')
| -rw-r--r-- | docs/Config_Reference.md | 17 |
1 files changed, 13 insertions, 4 deletions
diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md index 780d5707..3763aaf8 100644 --- a/docs/Config_Reference.md +++ b/docs/Config_Reference.md @@ -2616,10 +2616,19 @@ PCA9632 LED support. The PCA9632 is used on the FlashForge Dreamer. ``` [pca9632 my_pca9632] -scl_pin: -# The SCL "clock" pin. This parameter must be provided. -sda_pin: -# The SDA "data" pin. This parameter must be provided. +#i2c_address: 98 +# The i2c address that the chip is using on the i2c bus. This may be +# 96, 97, 98, or 99. The default is 98. +#i2c_mcu: +#i2c_bus: +#i2c_speed: +# See the "common I2C settings" section for a description of the +# above parameters. +#scl_pin: +#sda_pin: +# Alternatively, if the pca9632 is not connected to a hardware I2C +# bus, then one may specify the "clock" (scl_pin) and "data" +# (sda_pin) pins. The default is to use hardware I2C. #initial_RED: 0.0 #initial_GREEN: 0.0 #initial_BLUE: 0.0 |