diff options
| author | Kamil Trzcinski <ayufan@ayufan.eu> | 2021-06-08 10:39:55 +0000 |
|---|---|---|
| committer | KevinOConnor <kevin@koconnor.net> | 2021-06-14 12:56:50 -0400 |
| commit | d2c2aaf55df955e1e0f727d22362d57b41e614f5 (patch) | |
| tree | 60e465cc2b28b41f2415bb6bc506276a4946173d /docs/Config_Reference.md | |
| parent | 6dcb902d896e42c78779068adfdc67bf17c4698e (diff) | |
| download | kutter-d2c2aaf55df955e1e0f727d22362d57b41e614f5.tar.gz kutter-d2c2aaf55df955e1e0f727d22362d57b41e614f5.tar.xz kutter-d2c2aaf55df955e1e0f727d22362d57b41e614f5.zip | |
extruder: expose `can_extrude` flag based on temperature
Sometimes an automated filament load is implemented,
but extruder might not always extrude filament.
This adds a flag to check if this operation is possible.
Signed-off-by: Kamil Trzcinski <ayufan@ayufan.eu>
Diffstat (limited to 'docs/Config_Reference.md')
0 files changed, 0 insertions, 0 deletions