output_pin: Deprecate the maximum_mcu_duration parameter

Advise users to configure a pwm_tool config section if checking for
maximum mcu duration is required.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

1 files changed, 9 insertions, 9 deletions

diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md
index a6964e5b..226b7a13 100644
--- a/docs/Config_Reference.md
+++ b/docs/Config_Reference.md
@@ -3102,13 +3102,6 @@ pin:
 #shutdown_value:
 #   The value to set the pin to on an MCU shutdown event. The default
 #   is 0 (for low voltage).
-#maximum_mcu_duration:
-#   The maximum duration a non-shutdown value may be driven by the MCU
-#   without an acknowledge from the host.
-#   If host can not keep up with an update, the MCU will shutdown
-#   and set all pins to their respective shutdown values.
-#   Default: 0 (disabled)
-#   Usual values are around 5 seconds.
 #cycle_time: 0.100
 #   The amount of time (in seconds) per PWM cycle. It is recommended
 #   this be 10 milliseconds or greater when using software based PWM.
@@ -3128,8 +3121,9 @@ pin:
 #   then the 'value' parameter can be specified using the desired
 #   amperage for the stepper. The default is to not scale the 'value'
 #   parameter.
+#maximum_mcu_duration:
 #static_value:
-#   This option is deprecated and should no longer be specified.
+#   These options are deprecated and should no longer be specified.
 ```
 
 ### [pwm_tool]
@@ -3144,9 +3138,15 @@ extended [g-code commands](G-Codes.md#output_pin).
 [pwm_tool my_tool]
 pin:
 #   The pin to configure as an output. This parameter must be provided.
+#maximum_mcu_duration:
+#   The maximum duration a non-shutdown value may be driven by the MCU
+#   without an acknowledge from the host.
+#   If host can not keep up with an update, the MCU will shutdown
+#   and set all pins to their respective shutdown values.
+#   Default: 0 (disabled)
+#   Usual values are around 5 seconds.
 #value:
 #shutdown_value:
-#maximum_mcu_duration:
 #cycle_time: 0.100
 #hardware_pwm: False
 #scale: