diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2019-05-20 22:36:57 -0400 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2019-05-26 11:19:15 -0400 |
| commit | d6b69938abcff61ca1c2323899ec74eac149f13b (patch) | |
| tree | 55db94cd411d52172e4c096732c3320015e8b6d8 /docs/Config_Changes.md | |
| parent | 500f37821dd0ceeac2ce2636093565e987c8ba40 (diff) | |
| download | kutter-d6b69938abcff61ca1c2323899ec74eac149f13b.tar.gz kutter-d6b69938abcff61ca1c2323899ec74eac149f13b.tar.xz kutter-d6b69938abcff61ca1c2323899ec74eac149f13b.zip | |
gcode: Don't apply the SET_GCODE_OFFSET to the next g-code command
The SET_GCODE_OFFSET command could cause unwanted behavior when an
offset is applied to the following g-code command. (In particular,
when the following command is an extrude only move - as in
issue #1289.)
Don't apply the offset immediately. Instead, add support for a MOVE=1
parameter which will schedule a move to apply the given offset.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'docs/Config_Changes.md')
| -rw-r--r-- | docs/Config_Changes.md | 5 |
1 files changed, 5 insertions, 0 deletions
diff --git a/docs/Config_Changes.md b/docs/Config_Changes.md index f7e8017d..7ce25a1b 100644 --- a/docs/Config_Changes.md +++ b/docs/Config_Changes.md @@ -6,6 +6,11 @@ All dates in this document are approximate. # Changes +20190520: The SET_GCODE_OFFSET command has changed; update any g-code +macros accordingly. The command will no longer apply the requested +offset to the next G1 command. The old behavior may be approximated by +using the new "MOVE=1" parameter. + 20190404: The Python host software packages were updated. Users will need to rerun the ~/klipper/scripts/install-octopi.sh script (or otherwise upgrade the python dependencies if not using a standard |