diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2020-12-09 13:22:40 -0500 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2020-12-11 11:01:44 -0500 |
| commit | 2d6b44152a73a21186470a7840d91a6c8827556e (patch) | |
| tree | 7eec31d03c22b2b16d933e9ec05f9247ed431718 /docs/BLTouch.md | |
| parent | f3c5be0f003696966a299c936a8a7c05bf4465ff (diff) | |
| download | kutter-2d6b44152a73a21186470a7840d91a6c8827556e.tar.gz kutter-2d6b44152a73a21186470a7840d91a6c8827556e.tar.xz kutter-2d6b44152a73a21186470a7840d91a6c8827556e.zip | |
bltouch: Recommend using a pullup on the sensor_pin
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'docs/BLTouch.md')
| -rw-r--r-- | docs/BLTouch.md | 6 |
1 files changed, 4 insertions, 2 deletions
diff --git a/docs/BLTouch.md b/docs/BLTouch.md index 3a5c6ba6..0f97bc91 100644 --- a/docs/BLTouch.md +++ b/docs/BLTouch.md @@ -10,11 +10,13 @@ Hook up the BL-Touch "servo" connector to a `control_pin` according to the BL-Touch documentation or your MCU documentation. Using the original wiring, the yellow wire from the triple is the `control_pin` and the white wire from the pair is the `sensor_pin`. You need to -configure these pins according to your wiring. For example: +configure these pins according to your wiring. Most BL-Touch devices +require a pullup on the sensor pin (prefix the pin name with "^"). For +example: ``` [bltouch] -sensor_pin: P1.24 +sensor_pin: ^P1.24 control_pin: P1.26 ``` |