docs: Docs comma culture (#4822)

Many non-English speaking countries use a comma as a decimal separator for printed numbers. This can create some confusion in documentation and config files when not surrounded by contextual clues like parenthesis.  Improve documentation by adding spaces to coordinates.

Signed-off-by: Paul McGowan <mental450@gmail.com>

26 files changed, 110 insertions, 110 deletions

diff --git a/config/example-polar.cfg b/config/example-polar.cfg
index 62055038..90840fa1 100644
--- a/config/example-polar.cfg
+++ b/config/example-polar.cfg
@@ -1,7 +1,7 @@
 # This file is an example config file for polar style printers. One
 # may copy and edit this file to configure a new polar printer.
 
-# POLAR KINEMATICS ARE A WORK IN PROGRESS. Moves around the 0,0
+# POLAR KINEMATICS ARE A WORK IN PROGRESS. Moves around the 0, 0
 # position are known to not work properly.
 
 # See docs/Config_Reference.md for a description of parameters.
diff --git a/config/example-winch.cfg b/config/example-winch.cfg
index 5813aef7..d6d62b8a 100644
--- a/config/example-winch.cfg
+++ b/config/example-winch.cfg
@@ -6,7 +6,7 @@
 
 # Homing is not implemented on cable winch kinematics. In order to
 # home the printer, manually send movement commands until the toolhead
-# is at 0,0,0 and then issue a G28 command.
+# is at 0, 0, 0 and then issue a G28 command.
 
 # See docs/Config_Reference.md for a description of parameters.
 
diff --git a/config/kit-voron2-250mm.cfg b/config/kit-voron2-250mm.cfg
index 282e7595..343e9c67 100644
--- a/config/kit-voron2-250mm.cfg
+++ b/config/kit-voron2-250mm.cfg
@@ -227,14 +227,14 @@ gcode:
 [quad_gantry_level]
 #   Use QUAD_GANTRY_LEVEL to level a gantry.
 gantry_corners:
-   -55,-7
+   -55, -7
    305, 320
 #   Min & Max gantry corners - measure from nozzle at MIN (0,0) and MAX (250,250) to respective belt positions
 points:
-   25,0
-   25,200
-   225,200
-   225,0
+   25, 0
+   25, 200
+   225, 200
+   225, 0
 #   Probe points
 speed: 200
 horizontal_move_z: 6
diff --git a/config/kit-zav3d-2019.cfg b/config/kit-zav3d-2019.cfg
index b27e6017..e3b57b8e 100644
--- a/config/kit-zav3d-2019.cfg
+++ b/config/kit-zav3d-2019.cfg
@@ -134,9 +134,9 @@ sample_retract_dist: 3.0
 [bed_mesh]
 speed: 100
 horizontal_move_z: 5
-mesh_min: 69,41
-mesh_max: 189,161
-probe_count: 3,3
+mesh_min: 69, 41
+mesh_max: 189, 161
+probe_count: 3, 3
 
 [homing_override]
 set_position_z: 6
diff --git a/config/printer-anycubic-4maxpro-2.0-2021.cfg b/config/printer-anycubic-4maxpro-2.0-2021.cfg
index f87fce49..75d32411 100644
--- a/config/printer-anycubic-4maxpro-2.0-2021.cfg
+++ b/config/printer-anycubic-4maxpro-2.0-2021.cfg
@@ -132,10 +132,10 @@ max_z_accel: 50
 square_corner_velocity: 5
 
 [bed_screws]
-screw1: 5,5
-screw2: 265,210
-screw3: 5,210
-screw4: 265,5
+screw1: 5, 5
+screw2: 265, 210
+screw3: 5, 210
+screw4: 265, 5
 
 [filament_switch_sensor filament_sensor]
 switch_pin: ^!PC4
diff --git a/config/printer-creality-cr20-pro-2019.cfg b/config/printer-creality-cr20-pro-2019.cfg
index 19b46b63..29f04fe6 100644
--- a/config/printer-creality-cr20-pro-2019.cfg
+++ b/config/printer-creality-cr20-pro-2019.cfg
@@ -64,7 +64,7 @@ speed: 3.0
 samples: 1
 
 [safe_z_home]
-home_xy_position: 117,117
+home_xy_position: 117, 117
 speed: 50.0
 z_hop: 10.0
 z_hop_speed: 100
@@ -72,9 +72,9 @@ z_hop_speed: 100
 [bed_mesh]
 speed: 100
 horizontal_move_z: 8
-mesh_min: 106,39
-mesh_max: 281,229
-probe_count: 3,3
+mesh_min: 106, 39
+mesh_max: 281, 229
+probe_count: 3, 3
 
 [heater_bed]
 heater_pin: PH5
diff --git a/config/printer-creality-ender5plus-2019.cfg b/config/printer-creality-ender5plus-2019.cfg
index f8e2d1be..2dd0ef2c 100644
--- a/config/printer-creality-ender5plus-2019.cfg
+++ b/config/printer-creality-ender5plus-2019.cfg
@@ -75,8 +75,8 @@ pin_up_touch_mode_reports_triggered: False
 speed: 100
 horizontal_move_z: 8
 mesh_min: 50, 50
-mesh_max: 300,300
-probe_count: 3,3
+mesh_max: 300, 300
+probe_count: 3, 3
 
 [heater_bed]
 heater_pin: PH5
diff --git a/config/printer-creality-ender6-2020.cfg b/config/printer-creality-ender6-2020.cfg
index a5791a84..b4048cb7 100644
--- a/config/printer-creality-ender6-2020.cfg
+++ b/config/printer-creality-ender6-2020.cfg
@@ -75,7 +75,7 @@ position_max: 400
 # mesh_min: 10, 10
 # mesh_max: 239, 239
 # algorithm: bicubic
-# probe_count: 5,5
+# probe_count: 5, 5
 
 [extruder]
 max_extrude_only_distance: 1000.0
diff --git a/config/printer-creality-sermoonD1-2021.cfg b/config/printer-creality-sermoonD1-2021.cfg
index 08849814..b06abcf0 100644
--- a/config/printer-creality-sermoonD1-2021.cfg
+++ b/config/printer-creality-sermoonD1-2021.cfg
@@ -113,7 +113,7 @@ restart_method: command
 # mesh_min: 20, 15
 # mesh_max: 250, 240
 # algorithm: bicubic
-# probe_count: 5,5
+# probe_count: 5, 5
 
 [filament_switch_sensor filament_sensor]
 pause_on_runout: true
diff --git a/config/printer-eryone-er20-2021.cfg b/config/printer-eryone-er20-2021.cfg
index 6acd4dd0..9fc25f52 100644
--- a/config/printer-eryone-er20-2021.cfg
+++ b/config/printer-eryone-er20-2021.cfg
@@ -141,15 +141,15 @@ z_offset: 2.6
 pin_up_touch_mode_reports_triggered: False
 
 [safe_z_home]
-home_xy_position: 5,5
+home_xy_position: 5, 5
 z_hop: 5.0
 z_hop_speed: 5.0
 
 [bed_mesh]
 speed: 80
-mesh_min: 40,20
-mesh_max: 210,205
-probe_count: 5,5
+mesh_min: 40, 20
+mesh_max: 210, 205
+probe_count: 5, 5
 
 ######################################################################
 # "RepRapDiscount 128x64 Full Graphic Smart Controller" type display
diff --git a/config/printer-fokoos-odin5-f3-2021.cfg b/config/printer-fokoos-odin5-f3-2021.cfg
index cdab9c41..fc75d927 100644
--- a/config/printer-fokoos-odin5-f3-2021.cfg
+++ b/config/printer-fokoos-odin5-f3-2021.cfg
@@ -42,10 +42,10 @@ max_z_velocity: 25
 max_z_accel: 100
 
 [bed_screws]
-screw1: 33,33
-screw2: 203,33
-screw3: 203,201
-screw4: 33,201
+screw1: 33, 33
+screw2: 203, 33
+screw3: 203, 201
+screw4: 33, 201
 
 [stepper_x]
 step_pin: PE3
@@ -158,7 +158,7 @@ switch_pin: !PA4
 
 # Optional bed mesh configuration you can use if you have a BLtouch installed.
 #[bed_mesh]
-#mesh_min: 70,15
-#mesh_max: 220,210
+#mesh_min: 70, 15
+#mesh_max: 220, 210
 #horizontal_move_z: 5
 #speed: 150
diff --git a/config/printer-hiprecy-leo-2019.cfg b/config/printer-hiprecy-leo-2019.cfg
index a2a098cc..5651916a 100644
--- a/config/printer-hiprecy-leo-2019.cfg
+++ b/config/printer-hiprecy-leo-2019.cfg
@@ -93,9 +93,9 @@ speed: 5
 ########################################
 
 [bed_mesh]
-mesh_min: 40,40
-mesh_max: 185,230
-probe_count: 4,4
+mesh_min: 40, 40
+mesh_max: 185, 230
+probe_count: 4, 4
 speed: 100
 fade_end: 0.0
 algorithm: bicubic
diff --git a/config/printer-longer-lk4-pro-2019.cfg b/config/printer-longer-lk4-pro-2019.cfg
index 412ece2f..2ef49cfb 100644
--- a/config/printer-longer-lk4-pro-2019.cfg
+++ b/config/printer-longer-lk4-pro-2019.cfg
@@ -65,9 +65,9 @@ position_max: 250
 # z_offset: 1.56
 
 # [bed_mesh]
-# mesh_min: 16,16
-# mesh_max: 201,200
-# probe_count: 4,3
+# mesh_min: 16, 16
+# mesh_max: 201, 200
+# probe_count: 4, 3
 
 [extruder]
 step_pin: PA4
diff --git a/config/printer-lulzbot-mini1-2016.cfg b/config/printer-lulzbot-mini1-2016.cfg
index 0e8e7816..b1471dd1 100644
--- a/config/printer-lulzbot-mini1-2016.cfg
+++ b/config/printer-lulzbot-mini1-2016.cfg
@@ -197,10 +197,10 @@ samples_tolerance_retries: 2
 [bed_tilt]
 # Enable bed tilt measurments using the probe we defined above
 # Probe points using X0 Y0 offsets @ 0.01mm/step
-points: -2,-6
-        156,-6
-        156,158
-        -2,158
+points: -2, -6
+        156, -6
+        156, 158
+        -2, 158
 speed: 75
 horizontal_move_z: 2
 
diff --git a/config/printer-lulzbot-taz6-2017.cfg b/config/printer-lulzbot-taz6-2017.cfg
index 93c2bd14..8046381f 100644
--- a/config/printer-lulzbot-taz6-2017.cfg
+++ b/config/printer-lulzbot-taz6-2017.cfg
@@ -151,15 +151,15 @@ sample_retract_dist: 1.0
 samples_tolerance: 0.075
 
 [bed_tilt]
-points: -9,-9
-        289.4,-9
-        289.4,290
-        -9,289
+points: -9, -9
+        289.4, -9
+        289.4, 290
+        -9, 289
 speed: 75
 horizontal_move_z: 5
 
 [safe_z_home]
-home_xy_position: -19.1,259.3
+home_xy_position: -19.1, 259.3
 speed: 50.0
 z_hop: 10.0
 
diff --git a/config/printer-lulzbot-taz6-dual-v3-2017.cfg b/config/printer-lulzbot-taz6-dual-v3-2017.cfg
index e7a43653..2ec91f9e 100644
--- a/config/printer-lulzbot-taz6-dual-v3-2017.cfg
+++ b/config/printer-lulzbot-taz6-dual-v3-2017.cfg
@@ -185,10 +185,10 @@ samples_tolerance: 0.100
 [bed_tilt]
 #Enable bed tilt measurments using the probe we defined above
 #Probe points using X0 Y0 offsets @ 0.01mm/step
-points: -3,-6
-        282,-6
-        282,300
-        -3,300
+points: -3, -6
+        282, -6
+        282, 300
+        -3, 300
 speed: 75
 horizontal_move_z: 5
 
@@ -196,7 +196,7 @@ horizontal_move_z: 5
 #Needed to lift the Z to clear homing switch on bed
 # ---> WARNING! - Z_MAX limit switch not monitored in Klipper! <---
 # ---> This could potentially crash the toolhead if already at the top of Z travel! <---
-home_xy_position: -19,265
+home_xy_position: -19, 265
 speed: 50.0
 z_hop: 15.0
 move_to_previous: False
diff --git a/config/printer-monoprice-select-mini-v2-2018.cfg b/config/printer-monoprice-select-mini-v2-2018.cfg
index 3bc86c75..289a931d 100644
--- a/config/printer-monoprice-select-mini-v2-2018.cfg
+++ b/config/printer-monoprice-select-mini-v2-2018.cfg
@@ -143,10 +143,10 @@ max_z_accel: 20
 
 # Positions for BED_SCREWS_ADJUST levelling with bed screws still accessible
 [bed_screws]
-screw1: 22,10
-screw2: 22,90
-screw3: 98,90
-screw4: 98,10
+screw1: 22, 10
+screw2: 22, 90
+screw3: 98, 90
+screw4: 98, 10
 
 ######################################################################
 # Optional: i2c ssd1306 OLED-display controlled by raspi host_mcu
diff --git a/config/printer-mtw-create-2015.cfg b/config/printer-mtw-create-2015.cfg
index 4194fd23..674d0be9 100644
--- a/config/printer-mtw-create-2015.cfg
+++ b/config/printer-mtw-create-2015.cfg
@@ -93,13 +93,13 @@ y_offset: 37
 z_offset: 2.0
 
 [safe_z_home]
-home_xy_position: 125,150
+home_xy_position: 125, 150
 z_hop: 10
 z_hop_speed: 5
 
 [bed_mesh]
-mesh_min: 5,5
-mesh_max: 225,225
+mesh_min: 5, 5
+mesh_max: 225, 225
 
 [fan]
 pin: PH5
diff --git a/config/printer-prusa-mini-plus-2020.cfg b/config/printer-prusa-mini-plus-2020.cfg
index 2893738f..e64a27ba 100644
--- a/config/printer-prusa-mini-plus-2020.cfg
+++ b/config/printer-prusa-mini-plus-2020.cfg
@@ -158,15 +158,15 @@ z_offset: 0  # set this to your Live Z Offset, but negated (invert the sign)
 speed: 6.0
 
 [safe_z_home]
-home_xy_position: 147.4,21.1
+home_xy_position: 147.4, 21.1
 z_hop: 4
 
 [bed_mesh]
 speed: 100
 horizontal_move_z: 5
-mesh_min: 10,10
-mesh_max: 141,167
-probe_count: 4,4
+mesh_min: 10, 10
+mesh_max: 141, 167
+probe_count: 4, 4
 
 [filament_switch_sensor filament_sensor]
 switch_pin: ^PB4
diff --git a/config/printer-tevo-flash-2018.cfg b/config/printer-tevo-flash-2018.cfg
index 210419ae..e6dee68f 100644
--- a/config/printer-tevo-flash-2018.cfg
+++ b/config/printer-tevo-flash-2018.cfg
@@ -124,7 +124,7 @@ gcode:
 
 # Mesh Bed Leveling.
 [bed_mesh]
-mesh_min: 5,18
-mesh_max: 230,228
-probe_count: 9,9
+mesh_min: 5, 18
+mesh_max: 230, 228
+probe_count: 9, 9
 algorithm: bicubic
diff --git a/config/printer-tronxy-x5sa-pro-2020.cfg b/config/printer-tronxy-x5sa-pro-2020.cfg
index b09fffc1..50bf2d1b 100644
--- a/config/printer-tronxy-x5sa-pro-2020.cfg
+++ b/config/printer-tronxy-x5sa-pro-2020.cfg
@@ -118,26 +118,26 @@ switch_pin: !PA15
 pin: PB0
 
 [safe_z_home]
-home_xy_position: 165,165
+home_xy_position: 165, 165
 speed: 50
 z_hop: 10
 z_hop_speed: 5
 
 [bed_screws]
-screw1: 5,5
-screw2: 165,5
-screw3: 325,5
-screw4: 5,325
-screw5: 165,325
-screw6: 325,325
+screw1: 5, 5
+screw2: 165, 5
+screw3: 325, 5
+screw4: 5, 325
+screw5: 165, 325
+screw6: 325, 325
 
 [bed_mesh]
 speed: 120
-probe_count: 5,5
+probe_count: 5, 5
 horizontal_move_z: 5
 algorithm: lagrange
-mesh_min : 20,20
-mesh_max : 310,310
+mesh_min : 20, 20
+mesh_max : 310, 310
 mesh_pps: 0
 
 [probe]
diff --git a/config/printer-tronxy-x5sa-v6-2019.cfg b/config/printer-tronxy-x5sa-v6-2019.cfg
index 069f60d6..e61dacc3 100644
--- a/config/printer-tronxy-x5sa-v6-2019.cfg
+++ b/config/printer-tronxy-x5sa-v6-2019.cfg
@@ -110,26 +110,26 @@ switch_pin: PA15
 pin: PB0
 
 [safe_z_home]
-home_xy_position: 165,165
+home_xy_position: 165, 165
 speed: 50
 z_hop: 10
 z_hop_speed: 5
 
 [bed_screws]
-screw1: 5,5
-screw2: 165,5
-screw3: 325,5
-screw4: 5,325
-screw5: 165,325
-screw6: 325,325
+screw1: 5, 5
+screw2: 165, 5
+screw3: 325, 5
+screw4: 5, 325
+screw5: 165, 325
+screw6: 325, 325
 
 [bed_mesh]
 speed: 120
-probe_count: 5,5
+probe_count: 5, 5
 horizontal_move_z: 5
 algorithm: lagrange
-mesh_min : 20,20
-mesh_max : 310,310
+mesh_min : 20, 20
+mesh_max : 310, 310
 mesh_pps: 0
 
 [probe]
diff --git a/config/printer-velleman-k8800-2017.cfg b/config/printer-velleman-k8800-2017.cfg
index c1a8abe6..97e96112 100644
--- a/config/printer-velleman-k8800-2017.cfg
+++ b/config/printer-velleman-k8800-2017.cfg
@@ -92,7 +92,7 @@ z_offset: -15
 speed: 120
 horizontal_move_z: 5
 mesh_radius:65
-mesh_origin: 0,0
+mesh_origin: 0, 0
 round_probe_count: 7
 algorithm: bicubic
 
diff --git a/config/printer-wanhao-duplicator-9-2018.cfg b/config/printer-wanhao-duplicator-9-2018.cfg
index e3f5beeb..958a2d5f 100644
--- a/config/printer-wanhao-duplicator-9-2018.cfg
+++ b/config/printer-wanhao-duplicator-9-2018.cfg
@@ -91,18 +91,18 @@ square_corner_velocity: 15.0
 
 [bed_mesh]
 speed: 120
-mesh_min: 27,3
-mesh_max: 270,290
-probe_count: 5,3
+mesh_min: 27, 3
+mesh_max: 270, 290
+probe_count: 5, 3
 horizontal_move_z: 10
 
 [bed_screws]
-screw1: 5,5
+screw1: 5, 5
 screw1_name: front left screw
-screw2: 295,0
+screw2: 295, 0
 screw2_name: front right screw
-screw3: 295,290
+screw3: 295, 290
 screw3_name: back right screw
-screw4: 0,290
+screw4: 0, 290
 screw4_name: back left screw
 probe_height: 0
diff --git a/config/printer-wanhao-duplicator-i3-plus-mark2-2019.cfg b/config/printer-wanhao-duplicator-i3-plus-mark2-2019.cfg
index 5a499bc2..33b808b4 100644
--- a/config/printer-wanhao-duplicator-i3-plus-mark2-2019.cfg
+++ b/config/printer-wanhao-duplicator-i3-plus-mark2-2019.cfg
@@ -80,6 +80,6 @@ max_z_velocity: 5
 max_z_accel: 100
 
 [bed_mesh]
-mesh_min: 20,20
-mesh_max: 190,130
-probe_count: 4,4
+mesh_min: 20, 20
+mesh_max: 190, 130
+probe_count: 4, 4
diff --git a/config/sample-probe-as-z-endstop.cfg b/config/sample-probe-as-z-endstop.cfg
index 5deb088f..f458a5f3 100644
--- a/config/sample-probe-as-z-endstop.cfg
+++ b/config/sample-probe-as-z-endstop.cfg
@@ -21,7 +21,7 @@ position_min: -2 # The Z carriage may need to travel below the Z=0
 
 # The safe_z_home section modifies the default G28 behavior
 [safe_z_home]
-home_xy_position: 100,100
+home_xy_position: 100, 100
 speed: 50
 z_hop: 15
 z_hop_speed: 5
@@ -29,18 +29,18 @@ z_hop_speed: 5
 # Example bed_tilt config section
 [bed_tilt]
 points:
-    100,100
-    10,10
-    10,100
-    10,190
-    100,10
-    100,190
-    190,10
-    190,100
-    190,190
+    100, 100
+    10, 10
+    10, 100
+    10, 190
+    100, 10
+    100, 190
+    190, 10
+    190, 100
+    190, 190
 
 # Example bed_mesh config section
 [bed_mesh]
-mesh_min: 20,20
-mesh_max: 200,200
-probe_count: 4,4
+mesh_min: 20, 20
+mesh_max: 200, 200
+probe_count: 4, 4