diff options
| author | bondus <liquidpontus@yahoo.se> | 2020-08-07 17:39:44 +0200 |
|---|---|---|
| committer | GitHub <noreply@github.com> | 2020-08-07 11:39:44 -0400 |
| commit | c9e7119a933530c2989c94f7333bbea963a47fbd (patch) | |
| tree | ac3db34cf96f5e5d43cfa831f1c4db51a87ad765 /config | |
| parent | 3eefc037c5ffbef5dbb4d40baa89bee6d0f98473 (diff) | |
| download | kutter-c9e7119a933530c2989c94f7333bbea963a47fbd.tar.gz kutter-c9e7119a933530c2989c94f7333bbea963a47fbd.tar.xz kutter-c9e7119a933530c2989c94f7333bbea963a47fbd.zip | |
fan_generic: Add support for named fans and gcode to control them (#3054)
Signed-off-by: Pontus Borg <liquidpontus@yahoo.se>
Diffstat (limited to 'config')
| -rw-r--r-- | config/example-extras.cfg | 6 |
1 files changed, 6 insertions, 0 deletions
diff --git a/config/example-extras.cfg b/config/example-extras.cfg index 419c8f94..3e4b728d 100644 --- a/config/example-extras.cfg +++ b/config/example-extras.cfg @@ -1224,6 +1224,12 @@ # given id. The default is to not report the temperature via M105. +# Manually controlled fan (one may define any number of sections with a +# "fan_generic" prefix). The speed of a manually controlled fan is set with the +# SET_FAN_SPEED gcode command. +#[fan_generic extruder_partfan] +# Options are the same as for the [fan] section + ###################################################################### # Additional servos, LEDs, buttons, and other pins ###################################################################### |