diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2018-03-18 11:23:20 -0400 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2018-03-18 12:02:30 -0400 |
| commit | 973ef971438b14e25b1c9d1002f86fab94dad33e (patch) | |
| tree | 1a35339c23a6060eb6594938d22074533d881192 /config | |
| parent | 310cdf88ccdbc72283ce9ed7783f35a33198f9f1 (diff) | |
| download | kutter-973ef971438b14e25b1c9d1002f86fab94dad33e.tar.gz kutter-973ef971438b14e25b1c9d1002f86fab94dad33e.tar.xz kutter-973ef971438b14e25b1c9d1002f86fab94dad33e.zip | |
pid_calibrate: Move PID calibration logic from heater.py to new file
Drop support for M303 and PID_TUNE, and replace it with a new
PID_CALIBRATE command. Move the logic for this command from heater.py
to a new pid_calibrate.py file in the extras/ directory.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'config')
| -rw-r--r-- | config/printer-wanhao-duplicator-i3-v2.1-2017.cfg | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/config/printer-wanhao-duplicator-i3-v2.1-2017.cfg b/config/printer-wanhao-duplicator-i3-v2.1-2017.cfg index d1495afb..d7dd3738 100644 --- a/config/printer-wanhao-duplicator-i3-v2.1-2017.cfg +++ b/config/printer-wanhao-duplicator-i3-v2.1-2017.cfg @@ -45,11 +45,11 @@ # PID values from stock Wanhao firmware (Repetier) do not # translate directly to klipper. You will need to run klipper's # PID autotune function for the extruder and bed. After getting the -# klipper firmware up and running, run the M303 autotune procedures +# klipper firmware up and running, run the PID_CALIBRATE procedures # by sending these commands via octoprint terminal (one per autotune): # -# extruder: M303 E0 S<temp> -# heated bed: M303 E-1 S<temp> +# extruder: PID_CALIBRATE HEATER=extruder TARGET=<temp> +# heated bed: PID_CALIBRATE HEATER=heater_bed TARGET=<temp> # # After the autotune process completes, PID parameter results # can be found in the Octoprint terminal tab (if you're quick) |