diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2019-05-29 11:11:07 -0400 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2019-06-02 10:59:23 -0400 |
| commit | 3e1c42da801fb87c01369cb95f4cbd7766abb948 (patch) | |
| tree | e0938fbef1b53a79cfba5b4d9b00608b2a75b4c9 /config | |
| parent | e2e4a5d4e6baa4008a7b2caabd48edbfe4df4685 (diff) | |
| download | kutter-3e1c42da801fb87c01369cb95f4cbd7766abb948.tar.gz kutter-3e1c42da801fb87c01369cb95f4cbd7766abb948.tar.xz kutter-3e1c42da801fb87c01369cb95f4cbd7766abb948.zip | |
thermistor: Add support for printers with an "inline_resistor"
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'config')
| -rw-r--r-- | config/example.cfg | 5 |
1 files changed, 5 insertions, 0 deletions
diff --git a/config/example.cfg b/config/example.cfg index fb5a716e..56f60f29 100644 --- a/config/example.cfg +++ b/config/example.cfg @@ -164,6 +164,11 @@ sensor_pin: analog13 # The resistance (in ohms) of the pullup attached to the # thermistor. This parameter is only valid when the sensor is a # thermistor. The default is 4700 ohms. +#inline_resistor: 0 +# The resistance (in ohms) of an extra (not heat varying) resistor +# that is placed inline with the thermistor. It is rare to set this. +# This parameter is only valid when the sensor is a thermistor. The +# default is 0 ohms. #adc_voltage: 5.0 # The ADC comparison voltage. This parameter is only valid when the # sensor is an AD595 or "PT100 INA826". The default is 5 volts. |