config: Add SeeMeCNC Rostock Max V2 Delta Printer Config

As provided by @FEsmondeWhite

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

1 files changed, 94 insertions, 0 deletions

diff --git a/config/seemecnc-rostock-max-v2-2015.cfg b/config/seemecnc-rostock-max-v2-2015.cfg
new file mode 100644
index 00000000..dc3d56cd
--- /dev/null
+++ b/config/seemecnc-rostock-max-v2-2015.cfg
@@ -0,0 +1,94 @@
+# This file constains the pin mappings for the SeeMeCNC Rostock Max
+# (version 2) delta printer from 2015. To use this config, the
+# firmware should be compiled for the AVR atmega2560.
+
+# See the example.cfg file for a description of available parameters.
+
+[stepper_a]
+step_pin: PC0
+dir_pin: !PL1
+enable_pin: !PA7
+step_distance: .0125
+endstop_pin: ^PA2
+homing_speed: 50
+position_endstop: 380
+arm_length: 290.800
+
+[stepper_b]
+step_pin: PC1
+dir_pin: PL0
+enable_pin: !PA6
+step_distance: .0125
+endstop_pin: ^PA1
+
+[stepper_c]
+step_pin: PC2
+dir_pin: !PL2
+enable_pin: !PA5
+step_distance: .0125
+endstop_pin: ^PC7
+
+[extruder]
+step_pin: PC3
+dir_pin: !PL6
+enable_pin: !PA4
+step_distance: .010793
+nozzle_diameter: 0.500
+filament_diameter: 1.750
+heater_pin: PH6
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: PF0
+control: pid
+pid_Kp: 20.9700
+pid_Ki: 1.3400
+pid_Kd: 80.5600
+min_temp: 0
+max_temp: 300
+
+[heater_bed]
+heater_pin: PE5
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: PF2
+control: pid
+pid_Kp: 46.510
+pid_Ki: 1.040
+pid_Kd: 500.000
+min_temp: 0
+max_temp: 300
+
+[fan]
+pin: PH5
+
+[heater_fan nozzle_cooling_fan]
+pin: PH4
+heater: extruder
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: delta
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 150
+delta_radius: 174.75
+
+[ad5206 stepper_digipot]
+enable_pin: PD7
+scale: 2.08
+channel_1: 1.34
+channel_2: 1.0
+channel_4: 1.1
+channel_5: 1.1
+channel_6: 1.1
+
+[static_digital_output stepper_config]
+pins:
+    PG1, PG0,
+    PK7, PG2,
+    PK6, PK5,
+    PK3, PK4,
+    PK1, PK2
+
+[static_digital_output yellow_led]
+pins: !PB7