diff options
| author | bigtreetech <tech@biqu3d.com> | 2023-01-12 15:51:37 +0800 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2023-02-03 15:20:20 -0500 |
| commit | f250bdfd8a86f7d440b7efcc706706ad7fe42e4b (patch) | |
| tree | 4bf7280e647c8543e04b2a8899a00b20a6752e60 /config/sample-bigtreetech-ebb-canbus-v1.0.cfg | |
| parent | 1979c9d090c9cef241de4e7f06b6ed39a2bf2c9b (diff) | |
| download | kutter-f250bdfd8a86f7d440b7efcc706706ad7fe42e4b.tar.gz kutter-f250bdfd8a86f7d440b7efcc706706ad7fe42e4b.tar.xz kutter-f250bdfd8a86f7d440b7efcc706706ad7fe42e4b.zip | |
config: Add BigTreeTech EBB V1.2 / EBB SB V1.0 / E3EZ / M5P / M8P V1.1 / Octopus Max EZ
Signed-off-by: Alan.Ma from BigTreeTech tech@biqu3d.com
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'config/sample-bigtreetech-ebb-canbus-v1.0.cfg')
| -rw-r--r-- | config/sample-bigtreetech-ebb-canbus-v1.0.cfg | 20 |
1 files changed, 10 insertions, 10 deletions
diff --git a/config/sample-bigtreetech-ebb-canbus-v1.0.cfg b/config/sample-bigtreetech-ebb-canbus-v1.0.cfg index 3771b984..39097841 100644 --- a/config/sample-bigtreetech-ebb-canbus-v1.0.cfg +++ b/config/sample-bigtreetech-ebb-canbus-v1.0.cfg @@ -10,21 +10,21 @@ serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00 #canbus_uuid: 0e0d81e4210c [adxl345] -cs_pin: EBBCan: PB12 +cs_pin: EBBCan:PB12 spi_bus: spi2 axes_map: x,y,z [extruder] -step_pin: EBBCan: PA9 -dir_pin: !EBBCan: PA8 -enable_pin: !EBBCan: PA10 +step_pin: EBBCan:PA9 +dir_pin: !EBBCan:PA8 +enable_pin: !EBBCan:PA10 microsteps: 16 rotation_distance: 33.500 nozzle_diameter: 0.400 filament_diameter: 1.750 -heater_pin: EBBCan: PB1 +heater_pin: EBBCan:PB1 sensor_type: EPCOS 100K B57560G104F -sensor_pin: EBBCan: PA0 +sensor_pin: EBBCan:PA0 control: pid pid_Kp: 21.527 pid_Ki: 1.063 @@ -33,22 +33,22 @@ min_temp: 0 max_temp: 250 #sensor_type:MAX31865 -#sensor_pin: EBBCan: PA15 +#sensor_pin: EBBCan:PA15 #spi_bus: spi1a #rtd_nominal_r: 100 #rtd_reference_r: 430 #rtd_num_of_wires: 2 [tmc2209 extruder] -uart_pin: EBBCan: PA13 +uart_pin: EBBCan:PA13 run_current: 0.650 stealthchop_threshold: 999999 [fan] -pin: EBBCan: PA1 +pin: EBBCan:PA1 [heater_fan hotend_fan] -pin: EBBCan: PA2 +pin: EBBCan:PA2 heater: extruder heater_temp: 50.0 |