diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2021-03-19 12:52:21 -0400 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2021-03-25 10:49:17 -0400 |
| commit | 7a443e50e1dbf42eeef02b2983cb15f33722d45c (patch) | |
| tree | 0fe9fdc744af1b53b1f8be647a61b44193ae9428 /config/printer-wanhao-duplicator-9-2018.cfg | |
| parent | d386500788dc5764caff452ec74e6d944820614d (diff) | |
| download | kutter-7a443e50e1dbf42eeef02b2983cb15f33722d45c.tar.gz kutter-7a443e50e1dbf42eeef02b2983cb15f33722d45c.tar.xz kutter-7a443e50e1dbf42eeef02b2983cb15f33722d45c.zip | |
config: Don't use arduino mega aliases in example config files
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'config/printer-wanhao-duplicator-9-2018.cfg')
| -rw-r--r-- | config/printer-wanhao-duplicator-9-2018.cfg | 41 |
1 files changed, 20 insertions, 21 deletions
diff --git a/config/printer-wanhao-duplicator-9-2018.cfg b/config/printer-wanhao-duplicator-9-2018.cfg index 8197c796..e3f5beeb 100644 --- a/config/printer-wanhao-duplicator-9-2018.cfg +++ b/config/printer-wanhao-duplicator-9-2018.cfg @@ -5,31 +5,31 @@ # See docs/Config_Reference.md for a description of parameters. [stepper_x] -step_pin: ar61 -dir_pin: !ar62 -enable_pin: !ar60 +step_pin: PF7 +dir_pin: !PK0 +enable_pin: !PF6 microsteps: 16 rotation_distance: 40 -endstop_pin: ^!ar54 +endstop_pin: ^!PF0 position_endstop: 0 position_max: 295 homing_speed: 30.0 [stepper_y] -step_pin: ar64 -dir_pin: ar65 -enable_pin: !ar2 +step_pin: PK2 +dir_pin: PK3 +enable_pin: !PE4 microsteps: 16 rotation_distance: 40 -endstop_pin: ^!ar24 +endstop_pin: ^!PA2 position_endstop: 0 position_max: 290 homing_speed: 30.0 [stepper_z] -step_pin: ar67 -dir_pin: ar69 -enable_pin: !ar66 +step_pin: PK5 +dir_pin: PK7 +enable_pin: !PK4 microsteps: 16 rotation_distance: 8 endstop_pin: probe:z_virtual_endstop @@ -37,16 +37,16 @@ position_max: 370 position_min: -0.99 [extruder] -step_pin: ar58 -dir_pin: ar59 -enable_pin: !ar57 +step_pin: PF4 +dir_pin: PF5 +enable_pin: !PF3 microsteps: 16 rotation_distance: 31.936 nozzle_diameter: 0.4 filament_diameter: 1.75 -heater_pin: ar4 +heater_pin: PG5 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog1 +sensor_pin: PF1 control: pid pid_Kp: 33.41 pid_Ki: 1.47 @@ -55,9 +55,9 @@ min_temp: 0 max_temp: 315 [heater_bed] -heater_pin: ar3 +heater_pin: PE5 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog14 +sensor_pin: PK6 control: pid pid_Kp: 64.095903 pid_Ki: 1.649830 @@ -66,10 +66,10 @@ min_temp: 0 max_temp: 120 [fan] -pin: ar5 +pin: PE3 [probe] -pin: !ar6 +pin: !PH3 x_offset: 27 y_offset: 3 z_offset: 1.4 @@ -80,7 +80,6 @@ samples_result: average [mcu] serial: /dev/ttyUSB0 -pin_map: arduino [printer] kinematics: cartesian |