diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2021-03-19 12:52:21 -0400 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2021-03-25 10:49:17 -0400 |
| commit | 7a443e50e1dbf42eeef02b2983cb15f33722d45c (patch) | |
| tree | 0fe9fdc744af1b53b1f8be647a61b44193ae9428 /config/printer-velleman-k8200-2013.cfg | |
| parent | d386500788dc5764caff452ec74e6d944820614d (diff) | |
| download | kutter-7a443e50e1dbf42eeef02b2983cb15f33722d45c.tar.gz kutter-7a443e50e1dbf42eeef02b2983cb15f33722d45c.tar.xz kutter-7a443e50e1dbf42eeef02b2983cb15f33722d45c.zip | |
config: Don't use arduino mega aliases in example config files
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'config/printer-velleman-k8200-2013.cfg')
| -rw-r--r-- | config/printer-velleman-k8200-2013.cfg | 57 |
1 files changed, 28 insertions, 29 deletions
diff --git a/config/printer-velleman-k8200-2013.cfg b/config/printer-velleman-k8200-2013.cfg index 7bdce33a..b431378b 100644 --- a/config/printer-velleman-k8200-2013.cfg +++ b/config/printer-velleman-k8200-2013.cfg @@ -7,52 +7,52 @@ # See docs/Config_Reference.md for a description of parameters. [stepper_x] -step_pin: ar54 -dir_pin: !ar55 -enable_pin: !ar38 +step_pin: PF0 +dir_pin: !PF1 +enable_pin: !PD7 microsteps: 16 rotation_distance: 40 -endstop_pin: ^ar3 +endstop_pin: ^PE5 position_endstop: 0 position_max: 200 homing_speed: 50 [stepper_y] -step_pin: ar60 -dir_pin: !ar61 -enable_pin: !ar56 +step_pin: PF6 +dir_pin: !PF7 +enable_pin: !PF2 microsteps: 16 rotation_distance: 40 -endstop_pin: ^ar14 +endstop_pin: ^PJ1 position_endstop: 0 position_max: 200 homing_speed: 50 [stepper_z] -step_pin: ar46 -dir_pin: !ar48 -enable_pin: !ar63 +step_pin: PL3 +dir_pin: !PL1 +enable_pin: !PK1 microsteps: 16 rotation_distance: 8 -endstop_pin: ^ar18 +endstop_pin: ^PD3 position_endstop: 0.5 # Set position_max to 200 if you have the original Z-axis setup. position_max: 250 [extruder] -step_pin: ar26 +step_pin: PA4 # Remove the "!" from dir_pin if you have an original extruder -dir_pin: !ar28 -enable_pin: !ar24 +dir_pin: !PA6 +enable_pin: !PA2 # You will have to calculate your own rotation_distance. # This is for the belted extruder https://www.thingiverse.com/thing:339928 microsteps: 16 rotation_distance: 4.266 nozzle_diameter: 0.400 filament_diameter: 2.85 -heater_pin: ar10 +heater_pin: PB4 sensor_type: ATC Semitec 104GT-2 -sensor_pin: analog13 +sensor_pin: PK5 control: pid pid_Kp: 21.503 pid_Ki: 1.103 @@ -61,9 +61,9 @@ min_temp: 0 max_temp: 250 [heater_bed] -heater_pin: ar9 +heater_pin: PH6 sensor_type: ATC Semitec 104GT-2 -sensor_pin: analog14 +sensor_pin: PK6 control: pid pid_Kp: 75.283 pid_Ki: 0.588 @@ -72,12 +72,11 @@ min_temp: 0 max_temp: 130 [fan] -pin: ar8 +pin: PH5 kick_start_time: 0.500 [mcu] serial: /dev/ttyUSB0 -pin_map: arduino [printer] kinematics: cartesian @@ -89,11 +88,11 @@ max_z_accel: 100 # The LCD is untested - "RepRapDiscount 2004 Smart Controller" displays #[display] #lcd_type: hd44780 -#rs_pin: ar27 -#e_pin: ar29 -#d4_pin: ar37 -#d5_pin: ar35 -#d6_pin: ar33 -#d7_pin: ar31 -#encoder_pins: ^ar16, ^ar17 -#click_pin: ^!ar23 +#rs_pin: PA5 +#e_pin: PA7 +#d4_pin: PC0 +#d5_pin: PC2 +#d6_pin: PC4 +#d7_pin: PC6 +#encoder_pins: ^PH1, ^PH0 +#click_pin: ^!PA1 |