diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2020-10-15 11:53:35 -0400 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2020-10-15 11:55:32 -0400 |
| commit | e5f5070dca663cbef82e4cd7bd188db2b859b35e (patch) | |
| tree | 599f9fea14fd392b99c5e8cb15035f30a09be0c7 /config/printer-makergear-m2-2012.cfg | |
| parent | f8c4f90c049995b5ec8c15389a5065d1ae705030 (diff) | |
| download | kutter-e5f5070dca663cbef82e4cd7bd188db2b859b35e.tar.gz kutter-e5f5070dca663cbef82e4cd7bd188db2b859b35e.tar.xz kutter-e5f5070dca663cbef82e4cd7bd188db2b859b35e.zip | |
config: Update printer-makergear-m2-2012.cfg
Config should not specify a default pressure_advance. Note limit on
current with old 30 Ohm Z-motor.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'config/printer-makergear-m2-2012.cfg')
| -rw-r--r-- | config/printer-makergear-m2-2012.cfg | 3 |
1 files changed, 1 insertions, 2 deletions
diff --git a/config/printer-makergear-m2-2012.cfg b/config/printer-makergear-m2-2012.cfg index 52bdfeec..7993fba8 100644 --- a/config/printer-makergear-m2-2012.cfg +++ b/config/printer-makergear-m2-2012.cfg @@ -53,7 +53,6 @@ enable_pin: !PA4 step_distance: .004242 nozzle_diameter: 0.350 filament_diameter: 1.750 -pressure_advance: 0.07 heater_pin: PH6 sensor_type: EPCOS 100K B57560G104F sensor_pin: PF0 @@ -98,7 +97,7 @@ scale: 1.56 # Channel 1 is E0, 2 is E1, 3 is unused, 4 is Z, 5 is X, 6 is Y channel_1: 1.0 channel_2: 0.75 -channel_4: 0.82 +channel_4: 0.62 # Z-motor with 30 Ohm coils and 19V power can't exceed .633 Amps channel_5: 0.82 channel_6: 0.82 |