diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2021-03-18 13:20:54 -0400 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2021-03-18 13:33:33 -0400 |
| commit | 1eddc0fd907fb7f28e0b4537494e711f7ac1cac4 (patch) | |
| tree | c3390bc4c024e231e9cb271231b91b3e232612ad /config/printer-creality-cr6se-2020.cfg | |
| parent | c8dc3afc235d9190591056a852f7ff4996c41c54 (diff) | |
| download | kutter-1eddc0fd907fb7f28e0b4537494e711f7ac1cac4.tar.gz kutter-1eddc0fd907fb7f28e0b4537494e711f7ac1cac4.tar.xz kutter-1eddc0fd907fb7f28e0b4537494e711f7ac1cac4.zip | |
stm32: Simplify USB/Serial/CANbus Kconfig selection
Combine the various communication options into a single "make
menuconfig" menu item.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'config/printer-creality-cr6se-2020.cfg')
| -rw-r--r-- | config/printer-creality-cr6se-2020.cfg | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/config/printer-creality-cr6se-2020.cfg b/config/printer-creality-cr6se-2020.cfg index 10e5476f..11d827ea 100644 --- a/config/printer-creality-cr6se-2020.cfg +++ b/config/printer-creality-cr6se-2020.cfg @@ -1,7 +1,7 @@ # This file contains pin mappings for the stock 2020 Creality CR6-SE. -# To use this config, during "make menuconfig" select the -# STM32F103 with a "28KiB bootloader" and with "Use USB for -# communication" disabled. +# To use this config, during "make menuconfig" select the STM32F103 +# with a "28KiB bootloader" and serial (on USART1 PA10/PA9) +# communication. # Flash this firmware by copying "out/klipper.bin" to a SD card and # turning on the printer with the card inserted. The firmware |