diff options
| author | IronAegis90 <125813489+IronAegis90@users.noreply.github.com> | 2023-06-16 16:35:12 -0400 |
|---|---|---|
| committer | GitHub <noreply@github.com> | 2023-06-16 16:35:12 -0400 |
| commit | 6cbb6f144bb113788af5306349005fa5ba391fc4 (patch) | |
| tree | a1e51930c7f3112f61b4a44306a41899f3445426 /config/printer-creality-cr10-smart-pro-2022.cfg | |
| parent | 6ce2bd61cc0f3af769692811d73814a756fdda0c (diff) | |
| download | kutter-6cbb6f144bb113788af5306349005fa5ba391fc4.tar.gz kutter-6cbb6f144bb113788af5306349005fa5ba391fc4.tar.xz kutter-6cbb6f144bb113788af5306349005fa5ba391fc4.zip | |
config: Update printer-creality-cr10-smart-pro-2022.cfg (#6253)
Clarified the necessary steps for successfully flashing the firmware to the MCU.
Signed-off-by: Doug Whitlock <doug@thewhitlock.family>
Diffstat (limited to 'config/printer-creality-cr10-smart-pro-2022.cfg')
| -rw-r--r-- | config/printer-creality-cr10-smart-pro-2022.cfg | 3 |
1 files changed, 2 insertions, 1 deletions
diff --git a/config/printer-creality-cr10-smart-pro-2022.cfg b/config/printer-creality-cr10-smart-pro-2022.cfg index e7127b24..382ad34c 100644 --- a/config/printer-creality-cr10-smart-pro-2022.cfg +++ b/config/printer-creality-cr10-smart-pro-2022.cfg @@ -6,7 +6,8 @@ # communication. Enable PA0 GPIO pin on startup. # # Flash this firmware on the MCU by copying "out/klipper.bin" to an SD -# card and turning the printer on with the card inserted. The firmware +# card and turning the printer on by pressing and holding the power +# button with the card inserted for 10-20 seconds. The firmware # filename must end in ".bin" and must not match the last filename # that was flashed. # |