diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2021-03-18 13:20:54 -0400 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2021-03-18 13:33:33 -0400 |
| commit | 1eddc0fd907fb7f28e0b4537494e711f7ac1cac4 (patch) | |
| tree | c3390bc4c024e231e9cb271231b91b3e232612ad /config/printer-alfawise-u30-2018.cfg | |
| parent | c8dc3afc235d9190591056a852f7ff4996c41c54 (diff) | |
| download | kutter-1eddc0fd907fb7f28e0b4537494e711f7ac1cac4.tar.gz kutter-1eddc0fd907fb7f28e0b4537494e711f7ac1cac4.tar.xz kutter-1eddc0fd907fb7f28e0b4537494e711f7ac1cac4.zip | |
stm32: Simplify USB/Serial/CANbus Kconfig selection
Combine the various communication options into a single "make
menuconfig" menu item.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'config/printer-alfawise-u30-2018.cfg')
| -rw-r--r-- | config/printer-alfawise-u30-2018.cfg | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/config/printer-alfawise-u30-2018.cfg b/config/printer-alfawise-u30-2018.cfg index 0cdaae1d..d8b375e1 100644 --- a/config/printer-alfawise-u30-2018.cfg +++ b/config/printer-alfawise-u30-2018.cfg @@ -1,9 +1,9 @@ # This file contains common pin mappings for the Alfawise U30 printer. # To use this config, the firmware should be compiled for the # STM32F103. When running "make menuconfig", enable "extra low-level -# configuration setup", select the 64KiB bootloader, disable "USB for -# communication", and set "GPIO pins to set at micro-controller -# startup" to "!PC4,!PD12". +# configuration setup", select the 64KiB bootloader, serial (on USART1 +# PA10/PA9) communication, and set "GPIO pins to set at +# micro-controller startup" to "!PC4,!PD12". # The "make flash" command does not work on the Alfawise U30. Instead, # after running "make", copy the generated "out/klipper.bin" file to a |