config: Add example generic-smoothieboard.cfg config file

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

1 files changed, 87 insertions, 0 deletions

diff --git a/config/generic-smoothieboard.cfg b/config/generic-smoothieboard.cfg
new file mode 100644
index 00000000..0366e4f6
--- /dev/null
+++ b/config/generic-smoothieboard.cfg
@@ -0,0 +1,87 @@
+# This file contains common pin mappings for Smoothieboard. To use this
+# config, the firmware should be compiled for the LPC176x.
+
+# THIS FILE HAS NOT BEEN TESTED - PROCEED WITH CAUTION!
+
+# See the example.cfg file for a description of available parameters.
+
+[stepper_x]
+step_pin: P2.0
+dir_pin: P0.5
+enable_pin: !P0.4
+step_distance: .0125
+endstop_pin: ^P1.24
+#endstop_pin: ^P1.25
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: P2.1
+dir_pin: !P0.11
+enable_pin: !P0.10
+step_distance: .0125
+endstop_pin: ^P1.26
+#endstop_pin: ^P1.27
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: P2.2
+dir_pin: P0.20
+enable_pin: !P0.19
+step_distance: .0025
+endstop_pin: ^P1.28
+#endstop_pin: ^P1.29
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: P2.3
+dir_pin: P0.22
+enable_pin: !P0.21
+step_distance: .002
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: P2.7
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: P0.24
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+#[extruder1]
+#step_pin: P2.8
+#dir_pin: P2.13
+#enable_pin: !P4.29
+#heater_pin: P2.6
+#sensor_pin: P0.25
+#...
+
+[heater_bed]
+heater_pin: P2.5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: P0.23
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: P2.4
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+[static_digital_output leds]
+pins: P1.18, P1.19, P1.20, P1.21, P4.28