diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2021-03-19 12:51:50 -0400 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2021-03-25 10:49:17 -0400 |
| commit | 165b4cb63fc7b8ff967d327c88604b7ef0bef6a3 (patch) | |
| tree | 71b4892e59737d7b51cf20f3d80b6411d055c8e9 /config/generic-simulavr.cfg | |
| parent | f2c51cd729a6d209e5c7da92144363694360690a (diff) | |
| download | kutter-165b4cb63fc7b8ff967d327c88604b7ef0bef6a3.tar.gz kutter-165b4cb63fc7b8ff967d327c88604b7ef0bef6a3.tar.xz kutter-165b4cb63fc7b8ff967d327c88604b7ef0bef6a3.zip | |
config: Don't use sanguino aliases in example config files
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'config/generic-simulavr.cfg')
| -rw-r--r-- | config/generic-simulavr.cfg | 41 |
1 files changed, 20 insertions, 21 deletions
diff --git a/config/generic-simulavr.cfg b/config/generic-simulavr.cfg index e5ac5d28..84c08940 100644 --- a/config/generic-simulavr.cfg +++ b/config/generic-simulavr.cfg @@ -8,52 +8,52 @@ [stepper_x] # Pins: PA5, PA4, PA1 -step_pin: ar29 -dir_pin: ar28 -enable_pin: ar25 +step_pin: PA5 +dir_pin: PA4 +enable_pin: PA1 microsteps: 16 rotation_distance: 40 -endstop_pin: ^ar0 +endstop_pin: ^PB0 position_min: -0.25 position_endstop: 0 position_max: 200 [stepper_y] # Pins: PA3, PA2 -step_pin: ar27 -dir_pin: ar26 -enable_pin: ar25 +step_pin: PA3 +dir_pin: PA2 +enable_pin: PA1 microsteps: 16 rotation_distance: 40 -endstop_pin: ^ar1 +endstop_pin: ^PB1 position_min: -0.25 position_endstop: 0 position_max: 200 [stepper_z] # Pins: PC7, PC6 -step_pin: ar23 -dir_pin: ar22 -enable_pin: ar25 +step_pin: PC7 +dir_pin: PC6 +enable_pin: PA1 microsteps: 16 rotation_distance: 8 -endstop_pin: ^ar2 +endstop_pin: ^PB2 position_min: 0.1 position_endstop: 0.5 position_max: 200 [extruder] # Pins: PC3, PC2 -step_pin: ar19 -dir_pin: ar18 -enable_pin: ar25 +step_pin: PC3 +dir_pin: PC2 +enable_pin: PA1 microsteps: 16 rotation_distance: 33.500 nozzle_diameter: 0.500 filament_diameter: 3.500 -heater_pin: ar4 +heater_pin: PB4 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog7 +sensor_pin: PA7 control: pid pid_Kp: 22.2 pid_Ki: 1.08 @@ -63,19 +63,18 @@ min_extrude_temp: 0 max_temp: 210 [heater_bed] -heater_pin: ar3 +heater_pin: PB3 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog0 +sensor_pin: PA0 control: watermark min_temp: 0 max_temp: 110 [fan] -pin: ar14 +pin: PD6 [mcu] serial: /tmp/pseudoserial -pin_map: arduino [printer] kinematics: cartesian |