diff options
| author | Tomasz Kramkowski <tomasz@kramkow.ski> | 2025-08-15 21:13:44 +0100 |
|---|---|---|
| committer | Tomasz Kramkowski <tomasz@kramkow.ski> | 2025-08-15 21:46:37 +0100 |
| commit | ae9102482560b557628c83a247ab35063ade0bf7 (patch) | |
| tree | 2f08afac5a943aac31186e2c5c0c7d60e6d8837a /config/generic-printrboard.cfg | |
| parent | 121edea90cde8295f720ed9d2f2fccca61f66bb4 (diff) | |
| download | kutter-ae9102482560b557628c83a247ab35063ade0bf7.tar.gz kutter-ae9102482560b557628c83a247ab35063ade0bf7.tar.xz kutter-ae9102482560b557628c83a247ab35063ade0bf7.zip | |
Rename everything significant to Kutter except for docs
Diffstat (limited to 'config/generic-printrboard.cfg')
| -rw-r--r-- | config/generic-printrboard.cfg | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/config/generic-printrboard.cfg b/config/generic-printrboard.cfg index c0815964..d358714c 100644 --- a/config/generic-printrboard.cfg +++ b/config/generic-printrboard.cfg @@ -7,7 +7,7 @@ # - Connect the "BOOT" jumper. # - Press the reset button (on board) to enter into DFU mode. # - Connect via USB and run: -# avrdude -c flip1 -p usb1286 -U flash:w:out/klipper.elf.hex +# avrdude -c flip1 -p usb1286 -U flash:w:out/kutter.elf.hex # See docs/Config_Reference.md for a description of parameters. @@ -75,7 +75,7 @@ max_temp: 130 pin: PC6 [mcu] -serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00 +serial: /dev/serial/by-id/usb-Kutter_Kutter_firmware_12345-if00 [printer] kinematics: cartesian |